enable png support under win32
authorkoda
Wed, 24 Oct 2012 13:21:18 +0100 (2012-10-24)
changeset 7812 00696c1450da
parent 7811 49ab679cb384
child 7813 7ac83d79b897
enable png support under win32
hedgewars/CMakeLists.txt
misc/winutils/include/png.h
misc/winutils/include/pngconf.h
misc/winutils/include/zconf.h
misc/winutils/include/zlib.h
tools/build_windows.bat
--- a/hedgewars/CMakeLists.txt	Wed Oct 24 10:23:37 2012 +0100
+++ b/hedgewars/CMakeLists.txt	Wed Oct 24 13:21:18 2012 +0100
@@ -179,9 +179,8 @@
 if(NOT NOPNG)
     find_package(PNG)
     if(${PNG_FOUND})
-        message(STATUS "Found libpng: ${PNG_LIBRARY}")
         set(pascal_flags "-dPNG_SCREENSHOTS" ${pascal_flags})
-        if(APPLE)  # need to explictly link with the static lib -- maybe windows too?
+        if(APPLE)  # easier to explictly link with the static lib
             string(REGEX REPLACE "(.*)libpng.*" "\\1" PNG_LIBDIR "${PNG_LIBRARY}")
             set(pascal_flags "-k${PNG_LIBDIR}/libpng.a" ${pascal_flags})
         endif()
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/misc/winutils/include/png.h	Wed Oct 24 13:21:18 2012 +0100
@@ -0,0 +1,2674 @@
+
+/* png.h - header file for PNG reference library
+ *
+ * libpng version 1.5.13 - September 27, 2012
+ * Copyright (c) 1998-2012 Glenn Randers-Pehrson
+ * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
+ * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
+ *
+ * This code is released under the libpng license (See LICENSE, below)
+ *
+ * Authors and maintainers:
+ *   libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat
+ *   libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger
+ *   libpng versions 0.97, January 1998, through 1.5.13 - September 27, 2012: Glenn
+ *   See also "Contributing Authors", below.
+ *
+ * Note about libpng version numbers:
+ *
+ *   Due to various miscommunications, unforeseen code incompatibilities
+ *   and occasional factors outside the authors' control, version numbering
+ *   on the library has not always been consistent and straightforward.
+ *   The following table summarizes matters since version 0.89c, which was
+ *   the first widely used release:
+ *
+ *    source                 png.h  png.h  shared-lib
+ *    version                string   int  version
+ *    -------                ------ -----  ----------
+ *    0.89c "1.0 beta 3"     0.89      89  1.0.89
+ *    0.90  "1.0 beta 4"     0.90      90  0.90  [should have been 2.0.90]
+ *    0.95  "1.0 beta 5"     0.95      95  0.95  [should have been 2.0.95]
+ *    0.96  "1.0 beta 6"     0.96      96  0.96  [should have been 2.0.96]
+ *    0.97b "1.00.97 beta 7" 1.00.97   97  1.0.1 [should have been 2.0.97]
+ *    0.97c                  0.97      97  2.0.97
+ *    0.98                   0.98      98  2.0.98
+ *    0.99                   0.99      98  2.0.99
+ *    0.99a-m                0.99      99  2.0.99
+ *    1.00                   1.00     100  2.1.0 [100 should be 10000]
+ *    1.0.0      (from here on, the   100  2.1.0 [100 should be 10000]
+ *    1.0.1       png.h string is   10001  2.1.0
+ *    1.0.1a-e    identical to the  10002  from here on, the shared library
+ *    1.0.2       source version)   10002  is 2.V where V is the source code
+ *    1.0.2a-b                      10003  version, except as noted.
+ *    1.0.3                         10003
+ *    1.0.3a-d                      10004
+ *    1.0.4                         10004
+ *    1.0.4a-f                      10005
+ *    1.0.5 (+ 2 patches)           10005
+ *    1.0.5a-d                      10006
+ *    1.0.5e-r                      10100 (not source compatible)
+ *    1.0.5s-v                      10006 (not binary compatible)
+ *    1.0.6 (+ 3 patches)           10006 (still binary incompatible)
+ *    1.0.6d-f                      10007 (still binary incompatible)
+ *    1.0.6g                        10007
+ *    1.0.6h                        10007  10.6h (testing xy.z so-numbering)
+ *    1.0.6i                        10007  10.6i
+ *    1.0.6j                        10007  2.1.0.6j (incompatible with 1.0.0)
+ *    1.0.7beta11-14        DLLNUM  10007  2.1.0.7beta11-14 (binary compatible)
+ *    1.0.7beta15-18           1    10007  2.1.0.7beta15-18 (binary compatible)
+ *    1.0.7rc1-2               1    10007  2.1.0.7rc1-2 (binary compatible)
+ *    1.0.7                    1    10007  (still compatible)
+ *    1.0.8beta1-4             1    10008  2.1.0.8beta1-4
+ *    1.0.8rc1                 1    10008  2.1.0.8rc1
+ *    1.0.8                    1    10008  2.1.0.8
+ *    1.0.9beta1-6             1    10009  2.1.0.9beta1-6
+ *    1.0.9rc1                 1    10009  2.1.0.9rc1
+ *    1.0.9beta7-10            1    10009  2.1.0.9beta7-10
+ *    1.0.9rc2                 1    10009  2.1.0.9rc2
+ *    1.0.9                    1    10009  2.1.0.9
+ *    1.0.10beta1              1    10010  2.1.0.10beta1
+ *    1.0.10rc1                1    10010  2.1.0.10rc1
+ *    1.0.10                   1    10010  2.1.0.10
+ *    1.0.11beta1-3            1    10011  2.1.0.11beta1-3
+ *    1.0.11rc1                1    10011  2.1.0.11rc1
+ *    1.0.11                   1    10011  2.1.0.11
+ *    1.0.12beta1-2            2    10012  2.1.0.12beta1-2
+ *    1.0.12rc1                2    10012  2.1.0.12rc1
+ *    1.0.12                   2    10012  2.1.0.12
+ *    1.1.0a-f                 -    10100  2.1.1.0a-f (branch abandoned)
+ *    1.2.0beta1-2             2    10200  2.1.2.0beta1-2
+ *    1.2.0beta3-5             3    10200  3.1.2.0beta3-5
+ *    1.2.0rc1                 3    10200  3.1.2.0rc1
+ *    1.2.0                    3    10200  3.1.2.0
+ *    1.2.1beta1-4             3    10201  3.1.2.1beta1-4
+ *    1.2.1rc1-2               3    10201  3.1.2.1rc1-2
+ *    1.2.1                    3    10201  3.1.2.1
+ *    1.2.2beta1-6            12    10202  12.so.0.1.2.2beta1-6
+ *    1.0.13beta1             10    10013  10.so.0.1.0.13beta1
+ *    1.0.13rc1               10    10013  10.so.0.1.0.13rc1
+ *    1.2.2rc1                12    10202  12.so.0.1.2.2rc1
+ *    1.0.13                  10    10013  10.so.0.1.0.13
+ *    1.2.2                   12    10202  12.so.0.1.2.2
+ *    1.2.3rc1-6              12    10203  12.so.0.1.2.3rc1-6
+ *    1.2.3                   12    10203  12.so.0.1.2.3
+ *    1.2.4beta1-3            13    10204  12.so.0.1.2.4beta1-3
+ *    1.0.14rc1               13    10014  10.so.0.1.0.14rc1
+ *    1.2.4rc1                13    10204  12.so.0.1.2.4rc1
+ *    1.0.14                  10    10014  10.so.0.1.0.14
+ *    1.2.4                   13    10204  12.so.0.1.2.4
+ *    1.2.5beta1-2            13    10205  12.so.0.1.2.5beta1-2
+ *    1.0.15rc1-3             10    10015  10.so.0.1.0.15rc1-3
+ *    1.2.5rc1-3              13    10205  12.so.0.1.2.5rc1-3
+ *    1.0.15                  10    10015  10.so.0.1.0.15
+ *    1.2.5                   13    10205  12.so.0.1.2.5
+ *    1.2.6beta1-4            13    10206  12.so.0.1.2.6beta1-4
+ *    1.0.16                  10    10016  10.so.0.1.0.16
+ *    1.2.6                   13    10206  12.so.0.1.2.6
+ *    1.2.7beta1-2            13    10207  12.so.0.1.2.7beta1-2
+ *    1.0.17rc1               10    10017  12.so.0.1.0.17rc1
+ *    1.2.7rc1                13    10207  12.so.0.1.2.7rc1
+ *    1.0.17                  10    10017  12.so.0.1.0.17
+ *    1.2.7                   13    10207  12.so.0.1.2.7
+ *    1.2.8beta1-5            13    10208  12.so.0.1.2.8beta1-5
+ *    1.0.18rc1-5             10    10018  12.so.0.1.0.18rc1-5
+ *    1.2.8rc1-5              13    10208  12.so.0.1.2.8rc1-5
+ *    1.0.18                  10    10018  12.so.0.1.0.18
+ *    1.2.8                   13    10208  12.so.0.1.2.8
+ *    1.2.9beta1-3            13    10209  12.so.0.1.2.9beta1-3
+ *    1.2.9beta4-11           13    10209  12.so.0.9[.0]
+ *    1.2.9rc1                13    10209  12.so.0.9[.0]
+ *    1.2.9                   13    10209  12.so.0.9[.0]
+ *    1.2.10beta1-7           13    10210  12.so.0.10[.0]
+ *    1.2.10rc1-2             13    10210  12.so.0.10[.0]
+ *    1.2.10                  13    10210  12.so.0.10[.0]
+ *    1.4.0beta1-5            14    10400  14.so.0.0[.0]
+ *    1.2.11beta1-4           13    10211  12.so.0.11[.0]
+ *    1.4.0beta7-8            14    10400  14.so.0.0[.0]
+ *    1.2.11                  13    10211  12.so.0.11[.0]
+ *    1.2.12                  13    10212  12.so.0.12[.0]
+ *    1.4.0beta9-14           14    10400  14.so.0.0[.0]
+ *    1.2.13                  13    10213  12.so.0.13[.0]
+ *    1.4.0beta15-36          14    10400  14.so.0.0[.0]
+ *    1.4.0beta37-87          14    10400  14.so.14.0[.0]
+ *    1.4.0rc01               14    10400  14.so.14.0[.0]
+ *    1.4.0beta88-109         14    10400  14.so.14.0[.0]
+ *    1.4.0rc02-08            14    10400  14.so.14.0[.0]
+ *    1.4.0                   14    10400  14.so.14.0[.0]
+ *    1.4.1beta01-03          14    10401  14.so.14.1[.0]
+ *    1.4.1rc01               14    10401  14.so.14.1[.0]
+ *    1.4.1beta04-12          14    10401  14.so.14.1[.0]
+ *    1.4.1                   14    10401  14.so.14.1[.0]
+ *    1.4.2                   14    10402  14.so.14.2[.0]
+ *    1.4.3                   14    10403  14.so.14.3[.0]
+ *    1.4.4                   14    10404  14.so.14.4[.0]
+ *    1.5.0beta01-58          15    10500  15.so.15.0[.0]
+ *    1.5.0rc01-07            15    10500  15.so.15.0[.0]
+ *    1.5.0                   15    10500  15.so.15.0[.0]
+ *    1.5.1beta01-11          15    10501  15.so.15.1[.0]
+ *    1.5.1rc01-02            15    10501  15.so.15.1[.0]
+ *    1.5.1                   15    10501  15.so.15.1[.0]
+ *    1.5.2beta01-03          15    10502  15.so.15.2[.0]
+ *    1.5.2rc01-03            15    10502  15.so.15.2[.0]
+ *    1.5.2                   15    10502  15.so.15.2[.0]
+ *    1.5.3beta01-10          15    10503  15.so.15.3[.0]
+ *    1.5.3rc01-02            15    10503  15.so.15.3[.0]
+ *    1.5.3beta11             15    10503  15.so.15.3[.0]
+ *    1.5.3 [omitted]
+ *    1.5.4beta01-08          15    10504  15.so.15.4[.0]
+ *    1.5.4rc01               15    10504  15.so.15.4[.0]
+ *    1.5.4                   15    10504  15.so.15.4[.0]
+ *    1.5.5beta01-08          15    10505  15.so.15.5[.0]
+ *    1.5.5rc01               15    10505  15.so.15.5[.0]
+ *    1.5.5                   15    10505  15.so.15.5[.0]
+ *    1.5.6beta01-07          15    10506  15.so.15.6[.0]
+ *    1.5.6rc01-03            15    10506  15.so.15.6[.0]
+ *    1.5.6                   15    10506  15.so.15.6[.0]
+ *    1.5.7beta01-05          15    10507  15.so.15.7[.0]
+ *    1.5.7rc01-03            15    10507  15.so.15.7[.0]
+ *    1.5.7                   15    10507  15.so.15.7[.0]
+ *    1.5.8beta01             15    10508  15.so.15.8[.0]
+ *    1.5.8rc01               15    10508  15.so.15.8[.0]
+ *    1.5.8                   15    10508  15.so.15.8[.0]
+ *    1.5.9beta01-02          15    10509  15.so.15.9[.0]
+ *    1.5.9rc01               15    10509  15.so.15.9[.0]
+ *    1.5.9                   15    10509  15.so.15.9[.0]
+ *    1.5.10beta01-05         15    10510  15.so.15.10[.0]
+ *    1.5.10                  15    10510  15.so.15.10[.0]
+ *    1.5.11beta01            15    10511  15.so.15.11[.0]
+ *    1.5.11rc01-05           15    10511  15.so.15.11[.0]
+ *    1.5.11                  15    10511  15.so.15.11[.0]
+ *    1.5.12                  15    10512  15.so.15.12[.0]
+ *    1.5.13beta01-02         15    10513  15.so.15.13[.0]
+ *    1.5.13rc01              15    10513  15.so.15.13[.0]
+ *    1.5.13                  15    10513  15.so.15.13[.0]
+ *
+ *   Henceforth the source version will match the shared-library major
+ *   and minor numbers; the shared-library major version number will be
+ *   used for changes in backward compatibility, as it is intended.  The
+ *   PNG_LIBPNG_VER macro, which is not used within libpng but is available
+ *   for applications, is an unsigned integer of the form xyyzz corresponding
+ *   to the source version x.y.z (leading zeros in y and z).  Beta versions
+ *   were given the previous public release number plus a letter, until
+ *   version 1.0.6j; from then on they were given the upcoming public
+ *   release number plus "betaNN" or "rcNN".
+ *
+ *   Binary incompatibility exists only when applications make direct access
+ *   to the info_ptr or png_ptr members through png.h, and the compiled
+ *   application is loaded with a different version of the library.
+ *
+ *   DLLNUM will change each time there are forward or backward changes
+ *   in binary compatibility (e.g., when a new feature is added).
+ *
+ * See libpng-manual.txt or libpng.3 for more information.  The PNG
+ * specification is available as a W3C Recommendation and as an ISO
+ * Specification, <http://www.w3.org/TR/2003/REC-PNG-20031110/
+ */
+
+/*
+ * COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
+ *
+ * If you modify libpng you may insert additional notices immediately following
+ * this sentence.
+ *
+ * This code is released under the libpng license.
+ *
+ * libpng versions 1.2.6, August 15, 2004, through 1.5.13, September 27, 2012, are
+ * Copyright (c) 2004, 2006-2012 Glenn Randers-Pehrson, and are
+ * distributed according to the same disclaimer and license as libpng-1.2.5
+ * with the following individual added to the list of Contributing Authors:
+ *
+ *    Cosmin Truta
+ *
+ * libpng versions 1.0.7, July 1, 2000, through 1.2.5, October 3, 2002, are
+ * Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are
+ * distributed according to the same disclaimer and license as libpng-1.0.6
+ * with the following individuals added to the list of Contributing Authors:
+ *
+ *    Simon-Pierre Cadieux
+ *    Eric S. Raymond
+ *    Gilles Vollant
+ *
+ * and with the following additions to the disclaimer:
+ *
+ *    There is no warranty against interference with your enjoyment of the
+ *    library or against infringement.  There is no warranty that our
+ *    efforts or the library will fulfill any of your particular purposes
+ *    or needs.  This library is provided with all faults, and the entire
+ *    risk of satisfactory quality, performance, accuracy, and effort is with
+ *    the user.
+ *
+ * libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are
+ * Copyright (c) 1998, 1999, 2000 Glenn Randers-Pehrson, and are
+ * distributed according to the same disclaimer and license as libpng-0.96,
+ * with the following individuals added to the list of Contributing Authors:
+ *
+ *    Tom Lane
+ *    Glenn Randers-Pehrson
+ *    Willem van Schaik
+ *
+ * libpng versions 0.89, June 1996, through 0.96, May 1997, are
+ * Copyright (c) 1996, 1997 Andreas Dilger
+ * Distributed according to the same disclaimer and license as libpng-0.88,
+ * with the following individuals added to the list of Contributing Authors:
+ *
+ *    John Bowler
+ *    Kevin Bracey
+ *    Sam Bushell
+ *    Magnus Holmgren
+ *    Greg Roelofs
+ *    Tom Tanner
+ *
+ * libpng versions 0.5, May 1995, through 0.88, January 1996, are
+ * Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
+ *
+ * For the purposes of this copyright and license, "Contributing Authors"
+ * is defined as the following set of individuals:
+ *
+ *    Andreas Dilger
+ *    Dave Martindale
+ *    Guy Eric Schalnat
+ *    Paul Schmidt
+ *    Tim Wegner
+ *
+ * The PNG Reference Library is supplied "AS IS".  The Contributing Authors
+ * and Group 42, Inc. disclaim all warranties, expressed or implied,
+ * including, without limitation, the warranties of merchantability and of
+ * fitness for any purpose.  The Contributing Authors and Group 42, Inc.
+ * assume no liability for direct, indirect, incidental, special, exemplary,
+ * or consequential damages, which may result from the use of the PNG
+ * Reference Library, even if advised of the possibility of such damage.
+ *
+ * Permission is hereby granted to use, copy, modify, and distribute this
+ * source code, or portions hereof, for any purpose, without fee, subject
+ * to the following restrictions:
+ *
+ *   1. The origin of this source code must not be misrepresented.
+ *
+ *   2. Altered versions must be plainly marked as such and must not
+ *      be misrepresented as being the original source.
+ *
+ *   3. This Copyright notice may not be removed or altered from
+ *      any source or altered source distribution.
+ *
+ * The Contributing Authors and Group 42, Inc. specifically permit, without
+ * fee, and encourage the use of this source code as a component to
+ * supporting the PNG file format in commercial products.  If you use this
+ * source code in a product, acknowledgment is not required but would be
+ * appreciated.
+ */
+
+/*
+ * A "png_get_copyright" function is available, for convenient use in "about"
+ * boxes and the like:
+ *
+ *     printf("%s", png_get_copyright(NULL));
+ *
+ * Also, the PNG logo (in PNG format, of course) is supplied in the
+ * files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).
+ */
+
+/*
+ * Libpng is OSI Certified Open Source Software.  OSI Certified is a
+ * certification mark of the Open Source Initiative.
+ */
+
+/*
+ * The contributing authors would like to thank all those who helped
+ * with testing, bug fixes, and patience.  This wouldn't have been
+ * possible without all of you.
+ *
+ * Thanks to Frank J. T. Wojcik for helping with the documentation.
+ */
+
+/*
+ * Y2K compliance in libpng:
+ * =========================
+ *
+ *    September 27, 2012
+ *
+ *    Since the PNG Development group is an ad-hoc body, we can't make
+ *    an official declaration.
+ *
+ *    This is your unofficial assurance that libpng from version 0.71 and
+ *    upward through 1.5.13 are Y2K compliant.  It is my belief that
+ *    earlier versions were also Y2K compliant.
+ *
+ *    Libpng only has two year fields.  One is a 2-byte unsigned integer
+ *    that will hold years up to 65535.  The other holds the date in text
+ *    format, and will hold years up to 9999.
+ *
+ *    The integer is
+ *        "png_uint_16 year" in png_time_struct.
+ *
+ *    The string is
+ *        "char time_buffer[29]" in png_struct.  This will be no
+ *    longer used in libpng-1.6.0 and will be removed from libpng-1.7.0.
+ *
+ *    There are seven time-related functions:
+ *        png.c: png_convert_to_rfc_1123() in png.c
+ *          (formerly png_convert_to_rfc_1152() in error)
+ *        png_convert_from_struct_tm() in pngwrite.c, called in pngwrite.c
+ *        png_convert_from_time_t() in pngwrite.c
+ *        png_get_tIME() in pngget.c
+ *        png_handle_tIME() in pngrutil.c, called in pngread.c
+ *        png_set_tIME() in pngset.c
+ *        png_write_tIME() in pngwutil.c, called in pngwrite.c
+ *
+ *    All handle dates properly in a Y2K environment.  The
+ *    png_convert_from_time_t() function calls gmtime() to convert from system
+ *    clock time, which returns (year - 1900), which we properly convert to
+ *    the full 4-digit year.  There is a possibility that applications using
+ *    libpng are not passing 4-digit years into the png_convert_to_rfc_1123()
+ *    function, or that they are incorrectly passing only a 2-digit year
+ *    instead of "year - 1900" into the png_convert_from_struct_tm() function,
+ *    but this is not under our control.  The libpng documentation has always
+ *    stated that it works with 4-digit years, and the APIs have been
+ *    documented as such.
+ *
+ *    The tIME chunk itself is also Y2K compliant.  It uses a 2-byte unsigned
+ *    integer to hold the year, and can hold years as large as 65535.
+ *
+ *    zlib, upon which libpng depends, is also Y2K compliant.  It contains
+ *    no date-related code.
+ *
+ *       Glenn Randers-Pehrson
+ *       libpng maintainer
+ *       PNG Development Group
+ */
+
+#ifndef PNG_H
+#define PNG_H
+
+/* This is not the place to learn how to use libpng. The file libpng-manual.txt
+ * describes how to use libpng, and the file example.c summarizes it
+ * with some code on which to build.  This file is useful for looking
+ * at the actual function definitions and structure components.
+ *
+ * If you just need to read a PNG file and don't want to read the documentation
+ * skip to the end of this file and read the section entitled 'simplified API'.
+ */
+
+/* Version information for png.h - this should match the version in png.c */
+#define PNG_LIBPNG_VER_STRING "1.5.13"
+#define PNG_HEADER_VERSION_STRING \
+     " libpng version 1.5.13 - September 27, 2012\n"
+
+#define PNG_LIBPNG_VER_SONUM   15
+#define PNG_LIBPNG_VER_DLLNUM  15
+
+/* These should match the first 3 components of PNG_LIBPNG_VER_STRING: */
+#define PNG_LIBPNG_VER_MAJOR   1
+#define PNG_LIBPNG_VER_MINOR   5
+#define PNG_LIBPNG_VER_RELEASE 13
+
+/* This should match the numeric part of the final component of
+ * PNG_LIBPNG_VER_STRING, omitting any leading zero:
+ */
+
+#define PNG_LIBPNG_VER_BUILD  0
+
+/* Release Status */
+#define PNG_LIBPNG_BUILD_ALPHA    1
+#define PNG_LIBPNG_BUILD_BETA     2
+#define PNG_LIBPNG_BUILD_RC       3
+#define PNG_LIBPNG_BUILD_STABLE   4
+#define PNG_LIBPNG_BUILD_RELEASE_STATUS_MASK 7
+
+/* Release-Specific Flags */
+#define PNG_LIBPNG_BUILD_PATCH    8 /* Can be OR'ed with
+                                       PNG_LIBPNG_BUILD_STABLE only */
+#define PNG_LIBPNG_BUILD_PRIVATE 16 /* Cannot be OR'ed with
+                                       PNG_LIBPNG_BUILD_SPECIAL */
+#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with
+                                       PNG_LIBPNG_BUILD_PRIVATE */
+
+#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE
+
+/* Careful here.  At one time, Guy wanted to use 082, but that would be octal.
+ * We must not include leading zeros.
+ * Versions 0.7 through 1.0.0 were in the range 0 to 100 here (only
+ * version 1.0.0 was mis-numbered 100 instead of 10000).  From
+ * version 1.0.1 it's    xxyyzz, where x=major, y=minor, z=release
+ */
+#define PNG_LIBPNG_VER 10513 /* 1.5.13 */
+
+/* Library configuration: these options cannot be changed after
+ * the library has been built.
+ */
+#ifndef PNGLCONF_H
+    /* If pnglibconf.h is missing, you can
+     * copy scripts/pnglibconf.h.prebuilt to pnglibconf.h
+     */
+#   include "pnglibconf.h"
+#endif
+
+#ifndef PNG_VERSION_INFO_ONLY
+#  ifndef PNG_BUILDING_SYMBOL_TABLE
+  /*
+   *   Standard header files (not needed for the version info or while
+   *   building symbol table -- see scripts/pnglibconf.dfa)
+   */
+#    ifdef PNG_SETJMP_SUPPORTED
+#      include <setjmp.h>
+#    endif
+
+    /* Need the time information for converting tIME chunks, it
+     * defines struct tm:
+     */
+#    ifdef PNG_CONVERT_tIME_SUPPORTED
+       /* "time.h" functions are not supported on all operating systems */
+#      include <time.h>
+#    endif
+#  endif
+
+/* Machine specific configuration. */
+#  include "pngconf.h"
+#endif
+
+/*
+ * Added at libpng-1.2.8
+ *
+ * Ref MSDN: Private as priority over Special
+ * VS_FF_PRIVATEBUILD File *was not* built using standard release
+ * procedures. If this value is given, the StringFileInfo block must
+ * contain a PrivateBuild string.
+ *
+ * VS_FF_SPECIALBUILD File *was* built by the original company using
+ * standard release procedures but is a variation of the standard
+ * file of the same version number. If this value is given, the
+ * StringFileInfo block must contain a SpecialBuild string.
+ */
+
+#ifdef PNG_USER_PRIVATEBUILD /* From pnglibconf.h */
+#  define PNG_LIBPNG_BUILD_TYPE \
+       (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE)
+#else
+#  ifdef PNG_LIBPNG_SPECIALBUILD
+#    define PNG_LIBPNG_BUILD_TYPE \
+         (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL)
+#  else
+#    define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE)
+#  endif
+#endif
+
+#ifndef PNG_VERSION_INFO_ONLY
+
+/* Inhibit C++ name-mangling for libpng functions but not for system calls. */
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Version information for C files, stored in png.c.  This had better match
+ * the version above.
+ */
+#define png_libpng_ver png_get_header_ver(NULL)
+
+/* This file is arranged in several sections:
+ *
+ * 1. Any configuration options that can be specified by for the application
+ *    code when it is built.  (Build time configuration is in pnglibconf.h)
+ * 2. Type definitions (base types are defined in pngconf.h), structure
+ *    definitions.
+ * 3. Exported library functions.
+ *
+ * The library source code has additional files (principally pngpriv.h) that
+ * allow configuration of the library.
+ */
+/* Section 1: run time configuration
+ * See pnglibconf.h for build time configuration
+ *
+ * Run time configuration allows the application to choose between
+ * implementations of certain arithmetic APIs.  The default is set
+ * at build time and recorded in pnglibconf.h, but it is safe to
+ * override these (and only these) settings.  Note that this won't
+ * change what the library does, only application code, and the
+ * settings can (and probably should) be made on a per-file basis
+ * by setting the #defines before including png.h
+ *
+ * Use macros to read integers from PNG data or use the exported
+ * functions?
+ *   PNG_USE_READ_MACROS: use the macros (see below)  Note that
+ *     the macros evaluate their argument multiple times.
+ *   PNG_NO_USE_READ_MACROS: call the relevant library function.
+ *
+ * Use the alternative algorithm for compositing alpha samples that
+ * does not use division?
+ *   PNG_READ_COMPOSITE_NODIV_SUPPORTED: use the 'no division'
+ *      algorithm.
+ *   PNG_NO_READ_COMPOSITE_NODIV: use the 'division' algorithm.
+ *
+ * How to handle benign errors if PNG_ALLOW_BENIGN_ERRORS is
+ * false?
+ *   PNG_ALLOW_BENIGN_ERRORS: map calls to the benign error
+ *      APIs to png_warning.
+ * Otherwise the calls are mapped to png_error.
+ */
+
+/* Section 2: type definitions, including structures and compile time
+ * constants.
+ * See pngconf.h for base types that vary by machine/system
+ */
+
+/* This triggers a compiler error in png.c, if png.c and png.h
+ * do not agree upon the version number.
+ */
+typedef char* png_libpng_version_1_5_13;
+
+/* Three color definitions.  The order of the red, green, and blue, (and the
+ * exact size) is not important, although the size of the fields need to
+ * be png_byte or png_uint_16 (as defined below).
+ */
+typedef struct png_color_struct
+{
+   png_byte red;
+   png_byte green;
+   png_byte blue;
+} png_color;
+typedef png_color FAR * png_colorp;
+typedef PNG_CONST png_color FAR * png_const_colorp;
+typedef png_color FAR * FAR * png_colorpp;
+
+typedef struct png_color_16_struct
+{
+   png_byte index;    /* used for palette files */
+   png_uint_16 red;   /* for use in red green blue files */
+   png_uint_16 green;
+   png_uint_16 blue;
+   png_uint_16 gray;  /* for use in grayscale files */
+} png_color_16;
+typedef png_color_16 FAR * png_color_16p;
+typedef PNG_CONST png_color_16 FAR * png_const_color_16p;
+typedef png_color_16 FAR * FAR * png_color_16pp;
+
+typedef struct png_color_8_struct
+{
+   png_byte red;   /* for use in red green blue files */
+   png_byte green;
+   png_byte blue;
+   png_byte gray;  /* for use in grayscale files */
+   png_byte alpha; /* for alpha channel files */
+} png_color_8;
+typedef png_color_8 FAR * png_color_8p;
+typedef PNG_CONST png_color_8 FAR * png_const_color_8p;
+typedef png_color_8 FAR * FAR * png_color_8pp;
+
+/*
+ * The following two structures are used for the in-core representation
+ * of sPLT chunks.
+ */
+typedef struct png_sPLT_entry_struct
+{
+   png_uint_16 red;
+   png_uint_16 green;
+   png_uint_16 blue;
+   png_uint_16 alpha;
+   png_uint_16 frequency;
+} png_sPLT_entry;
+typedef png_sPLT_entry FAR * png_sPLT_entryp;
+typedef PNG_CONST png_sPLT_entry FAR * png_const_sPLT_entryp;
+typedef png_sPLT_entry FAR * FAR * png_sPLT_entrypp;
+
+/*  When the depth of the sPLT palette is 8 bits, the color and alpha samples
+ *  occupy the LSB of their respective members, and the MSB of each member
+ *  is zero-filled.  The frequency member always occupies the full 16 bits.
+ */
+
+typedef struct png_sPLT_struct
+{
+   png_charp name;           /* palette name */
+   png_byte depth;           /* depth of palette samples */
+   png_sPLT_entryp entries;  /* palette entries */
+   png_int_32 nentries;      /* number of palette entries */
+} png_sPLT_t;
+typedef png_sPLT_t FAR * png_sPLT_tp;
+typedef PNG_CONST png_sPLT_t FAR * png_const_sPLT_tp;
+typedef png_sPLT_t FAR * FAR * png_sPLT_tpp;
+
+#ifdef PNG_TEXT_SUPPORTED
+/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file,
+ * and whether that contents is compressed or not.  The "key" field
+ * points to a regular zero-terminated C string.  The "text" fields can be a
+ * regular C string, an empty string, or a NULL pointer.
+ * However, the structure returned by png_get_text() will always contain
+ * the "text" field as a regular zero-terminated C string (possibly
+ * empty), never a NULL pointer, so it can be safely used in printf() and
+ * other string-handling functions.  Note that the "itxt_length", "lang", and
+ * "lang_key" members of the structure only exist when the library is built
+ * with iTXt chunk support.  Prior to libpng-1.4.0 the library was built by
+ * default without iTXt support. Also note that when iTXt *is* supported,
+ * the "lang" and "lang_key" fields contain NULL pointers when the
+ * "compression" field contains * PNG_TEXT_COMPRESSION_NONE or
+ * PNG_TEXT_COMPRESSION_zTXt. Note that the "compression value" is not the
+ * same as what appears in the PNG tEXt/zTXt/iTXt chunk's "compression flag"
+ * which is always 0 or 1, or its "compression method" which is always 0.
+ */
+typedef struct png_text_struct
+{
+   int  compression;       /* compression value:
+                             -1: tEXt, none
+                              0: zTXt, deflate
+                              1: iTXt, none
+                              2: iTXt, deflate  */
+   png_charp key;          /* keyword, 1-79 character description of "text" */
+   png_charp text;         /* comment, may be an empty string (ie "")
+                              or a NULL pointer */
+   png_size_t text_length; /* length of the text string */
+   png_size_t itxt_length; /* length of the itxt string */
+   png_charp lang;         /* language code, 0-79 characters
+                              or a NULL pointer */
+   png_charp lang_key;     /* keyword translated UTF-8 string, 0 or more
+                              chars or a NULL pointer */
+} png_text;
+typedef png_text FAR * png_textp;
+typedef PNG_CONST png_text FAR * png_const_textp;
+typedef png_text FAR * FAR * png_textpp;
+#endif
+
+/* Supported compression types for text in PNG files (tEXt, and zTXt).
+ * The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */
+#define PNG_TEXT_COMPRESSION_NONE_WR -3
+#define PNG_TEXT_COMPRESSION_zTXt_WR -2
+#define PNG_TEXT_COMPRESSION_NONE    -1
+#define PNG_TEXT_COMPRESSION_zTXt     0
+#define PNG_ITXT_COMPRESSION_NONE     1
+#define PNG_ITXT_COMPRESSION_zTXt     2
+#define PNG_TEXT_COMPRESSION_LAST     3  /* Not a valid value */
+
+/* png_time is a way to hold the time in an machine independent way.
+ * Two conversions are provided, both from time_t and struct tm.  There
+ * is no portable way to convert to either of these structures, as far
+ * as I know.  If you know of a portable way, send it to me.  As a side
+ * note - PNG has always been Year 2000 compliant!
+ */
+typedef struct png_time_struct
+{
+   png_uint_16 year; /* full year, as in, 1995 */
+   png_byte month;   /* month of year, 1 - 12 */
+   png_byte day;     /* day of month, 1 - 31 */
+   png_byte hour;    /* hour of day, 0 - 23 */
+   png_byte minute;  /* minute of hour, 0 - 59 */
+   png_byte second;  /* second of minute, 0 - 60 (for leap seconds) */
+} png_time;
+typedef png_time FAR * png_timep;
+typedef PNG_CONST png_time FAR * png_const_timep;
+typedef png_time FAR * FAR * png_timepp;
+
+#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) || \
+    defined(PNG_HANDLE_AS_UNKNOWN_SUPPORTED)
+/* png_unknown_chunk is a structure to hold queued chunks for which there is
+ * no specific support.  The idea is that we can use this to queue
+ * up private chunks for output even though the library doesn't actually
+ * know about their semantics.
+ */
+typedef struct png_unknown_chunk_t
+{
+    png_byte name[5];
+    png_byte *data;
+    png_size_t size;
+
+    /* libpng-using applications should NOT directly modify this byte. */
+    png_byte location; /* mode of operation at read time */
+}
+
+
+png_unknown_chunk;
+typedef png_unknown_chunk FAR * png_unknown_chunkp;
+typedef PNG_CONST png_unknown_chunk FAR * png_const_unknown_chunkp;
+typedef png_unknown_chunk FAR * FAR * png_unknown_chunkpp;
+#endif
+
+/* Values for the unknown chunk location byte */
+
+#define PNG_HAVE_IHDR  0x01
+#define PNG_HAVE_PLTE  0x02
+#define PNG_AFTER_IDAT 0x08
+
+/* The complete definition of png_info has, as of libpng-1.5.0,
+ * been moved into a separate header file that is not accessible to
+ * applications.  Read libpng-manual.txt or libpng.3 for more info.
+ */
+typedef struct png_info_def png_info;
+typedef png_info FAR * png_infop;
+typedef PNG_CONST png_info FAR * png_const_infop;
+typedef png_info FAR * FAR * png_infopp;
+
+/* Maximum positive integer used in PNG is (2^31)-1 */
+#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL)
+#define PNG_UINT_32_MAX ((png_uint_32)(-1))
+#define PNG_SIZE_MAX ((png_size_t)(-1))
+
+/* These are constants for fixed point values encoded in the
+ * PNG specification manner (x100000)
+ */
+#define PNG_FP_1    100000
+#define PNG_FP_HALF  50000
+#define PNG_FP_MAX  ((png_fixed_point)0x7fffffffL)
+#define PNG_FP_MIN  (-PNG_FP_MAX)
+
+/* These describe the color_type field in png_info. */
+/* color type masks */
+#define PNG_COLOR_MASK_PALETTE    1
+#define PNG_COLOR_MASK_COLOR      2
+#define PNG_COLOR_MASK_ALPHA      4
+
+/* color types.  Note that not all combinations are legal */
+#define PNG_COLOR_TYPE_GRAY 0
+#define PNG_COLOR_TYPE_PALETTE  (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE)
+#define PNG_COLOR_TYPE_RGB        (PNG_COLOR_MASK_COLOR)
+#define PNG_COLOR_TYPE_RGB_ALPHA  (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA)
+#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA)
+/* aliases */
+#define PNG_COLOR_TYPE_RGBA  PNG_COLOR_TYPE_RGB_ALPHA
+#define PNG_COLOR_TYPE_GA  PNG_COLOR_TYPE_GRAY_ALPHA
+
+/* This is for compression type. PNG 1.0-1.2 only define the single type. */
+#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */
+#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE
+
+/* This is for filter type. PNG 1.0-1.2 only define the single type. */
+#define PNG_FILTER_TYPE_BASE      0 /* Single row per-byte filtering */
+#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */
+#define PNG_FILTER_TYPE_DEFAULT   PNG_FILTER_TYPE_BASE
+
+/* These are for the interlacing type.  These values should NOT be changed. */
+#define PNG_INTERLACE_NONE        0 /* Non-interlaced image */
+#define PNG_INTERLACE_ADAM7       1 /* Adam7 interlacing */
+#define PNG_INTERLACE_LAST        2 /* Not a valid value */
+
+/* These are for the oFFs chunk.  These values should NOT be changed. */
+#define PNG_OFFSET_PIXEL          0 /* Offset in pixels */
+#define PNG_OFFSET_MICROMETER     1 /* Offset in micrometers (1/10^6 meter) */
+#define PNG_OFFSET_LAST           2 /* Not a valid value */
+
+/* These are for the pCAL chunk.  These values should NOT be changed. */
+#define PNG_EQUATION_LINEAR       0 /* Linear transformation */
+#define PNG_EQUATION_BASE_E       1 /* Exponential base e transform */
+#define PNG_EQUATION_ARBITRARY    2 /* Arbitrary base exponential transform */
+#define PNG_EQUATION_HYPERBOLIC   3 /* Hyperbolic sine transformation */
+#define PNG_EQUATION_LAST         4 /* Not a valid value */
+
+/* These are for the sCAL chunk.  These values should NOT be changed. */
+#define PNG_SCALE_UNKNOWN         0 /* unknown unit (image scale) */
+#define PNG_SCALE_METER           1 /* meters per pixel */
+#define PNG_SCALE_RADIAN          2 /* radians per pixel */
+#define PNG_SCALE_LAST            3 /* Not a valid value */
+
+/* These are for the pHYs chunk.  These values should NOT be changed. */
+#define PNG_RESOLUTION_UNKNOWN    0 /* pixels/unknown unit (aspect ratio) */
+#define PNG_RESOLUTION_METER      1 /* pixels/meter */
+#define PNG_RESOLUTION_LAST       2 /* Not a valid value */
+
+/* These are for the sRGB chunk.  These values should NOT be changed. */
+#define PNG_sRGB_INTENT_PERCEPTUAL 0
+#define PNG_sRGB_INTENT_RELATIVE   1
+#define PNG_sRGB_INTENT_SATURATION 2
+#define PNG_sRGB_INTENT_ABSOLUTE   3
+#define PNG_sRGB_INTENT_LAST       4 /* Not a valid value */
+
+/* This is for text chunks */
+#define PNG_KEYWORD_MAX_LENGTH     79
+
+/* Maximum number of entries in PLTE/sPLT/tRNS arrays */
+#define PNG_MAX_PALETTE_LENGTH    256
+
+/* These determine if an ancillary chunk's data has been successfully read
+ * from the PNG header, or if the application has filled in the corresponding
+ * data in the info_struct to be written into the output file.  The values
+ * of the PNG_INFO_<chunk> defines should NOT be changed.
+ */
+#define PNG_INFO_gAMA 0x0001
+#define PNG_INFO_sBIT 0x0002
+#define PNG_INFO_cHRM 0x0004
+#define PNG_INFO_PLTE 0x0008
+#define PNG_INFO_tRNS 0x0010
+#define PNG_INFO_bKGD 0x0020
+#define PNG_INFO_hIST 0x0040
+#define PNG_INFO_pHYs 0x0080
+#define PNG_INFO_oFFs 0x0100
+#define PNG_INFO_tIME 0x0200
+#define PNG_INFO_pCAL 0x0400
+#define PNG_INFO_sRGB 0x0800   /* GR-P, 0.96a */
+#define PNG_INFO_iCCP 0x1000   /* ESR, 1.0.6 */
+#define PNG_INFO_sPLT 0x2000   /* ESR, 1.0.6 */
+#define PNG_INFO_sCAL 0x4000   /* ESR, 1.0.6 */
+#define PNG_INFO_IDAT 0x8000   /* ESR, 1.0.6 */
+
+/* This is used for the transformation routines, as some of them
+ * change these values for the row.  It also should enable using
+ * the routines for other purposes.
+ */
+typedef struct png_row_info_struct
+{
+   png_uint_32 width;    /* width of row */
+   png_size_t rowbytes;  /* number of bytes in row */
+   png_byte color_type;  /* color type of row */
+   png_byte bit_depth;   /* bit depth of row */
+   png_byte channels;    /* number of channels (1, 2, 3, or 4) */
+   png_byte pixel_depth; /* bits per pixel (depth * channels) */
+} png_row_info;
+
+typedef png_row_info FAR * png_row_infop;
+typedef png_row_info FAR * FAR * png_row_infopp;
+
+/* The complete definition of png_struct has, as of libpng-1.5.0,
+ * been moved into a separate header file that is not accessible to
+ * applications.  Read libpng-manual.txt or libpng.3 for more info.
+ */
+typedef struct png_struct_def png_struct;
+typedef PNG_CONST png_struct FAR * png_const_structp;
+typedef png_struct FAR * png_structp;
+
+/* These are the function types for the I/O functions and for the functions
+ * that allow the user to override the default I/O functions with his or her
+ * own.  The png_error_ptr type should match that of user-supplied warning
+ * and error functions, while the png_rw_ptr type should match that of the
+ * user read/write data functions.  Note that the 'write' function must not
+ * modify the buffer it is passed. The 'read' function, on the other hand, is
+ * expected to return the read data in the buffer.
+ */
+typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp));
+typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, png_size_t));
+typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp));
+typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32,
+    int));
+typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32,
+    int));
+
+#ifdef PNG_PROGRESSIVE_READ_SUPPORTED
+typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop));
+typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop));
+
+/* The following callback receives png_uint_32 row_number, int pass for the
+ * png_bytep data of the row.  When transforming an interlaced image the
+ * row number is the row number within the sub-image of the interlace pass, so
+ * the value will increase to the height of the sub-image (not the full image)
+ * then reset to 0 for the next pass.
+ *
+ * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to
+ * find the output pixel (x,y) given an interlaced sub-image pixel
+ * (row,col,pass).  (See below for these macros.)
+ */
+typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep,
+    png_uint_32, int));
+#endif
+
+#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \
+    defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED)
+typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop,
+    png_bytep));
+#endif
+
+#ifdef PNG_USER_CHUNKS_SUPPORTED
+typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp,
+    png_unknown_chunkp));
+#endif
+#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED
+typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp));
+#endif
+
+#ifdef PNG_SETJMP_SUPPORTED
+/* This must match the function definition in <setjmp.h>, and the application
+ * must include this before png.h to obtain the definition of jmp_buf.  The
+ * function is required to be PNG_NORETURN, but this is not checked.  If the
+ * function does return the application will crash via an abort() or similar
+ * system level call.
+ *
+ * If you get a warning here while building the library you may need to make
+ * changes to ensure that pnglibconf.h records the calling convention used by
+ * your compiler.  This may be very difficult - try using a different compiler
+ * to build the library!
+ */
+PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), PNGARG((jmp_buf, int)), typedef);
+#endif
+
+/* Transform masks for the high-level interface */
+#define PNG_TRANSFORM_IDENTITY       0x0000    /* read and write */
+#define PNG_TRANSFORM_STRIP_16       0x0001    /* read only */
+#define PNG_TRANSFORM_STRIP_ALPHA    0x0002    /* read only */
+#define PNG_TRANSFORM_PACKING        0x0004    /* read and write */
+#define PNG_TRANSFORM_PACKSWAP       0x0008    /* read and write */
+#define PNG_TRANSFORM_EXPAND         0x0010    /* read only */
+#define PNG_TRANSFORM_INVERT_MONO    0x0020    /* read and write */
+#define PNG_TRANSFORM_SHIFT          0x0040    /* read and write */
+#define PNG_TRANSFORM_BGR            0x0080    /* read and write */
+#define PNG_TRANSFORM_SWAP_ALPHA     0x0100    /* read and write */
+#define PNG_TRANSFORM_SWAP_ENDIAN    0x0200    /* read and write */
+#define PNG_TRANSFORM_INVERT_ALPHA   0x0400    /* read and write */
+#define PNG_TRANSFORM_STRIP_FILLER   0x0800    /* write only */
+/* Added to libpng-1.2.34 */
+#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER
+#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */
+/* Added to libpng-1.4.0 */
+#define PNG_TRANSFORM_GRAY_TO_RGB   0x2000      /* read only */
+/* Added to libpng-1.5.4 */
+#define PNG_TRANSFORM_EXPAND_16     0x4000      /* read only */
+#define PNG_TRANSFORM_SCALE_16      0x8000      /* read only */
+
+/* Flags for MNG supported features */
+#define PNG_FLAG_MNG_EMPTY_PLTE     0x01
+#define PNG_FLAG_MNG_FILTER_64      0x04
+#define PNG_ALL_MNG_FEATURES        0x05
+
+/* NOTE: prior to 1.5 these functions had no 'API' style declaration,
+ * this allowed the zlib default functions to be used on Windows
+ * platforms.  In 1.5 the zlib default malloc (which just calls malloc and
+ * ignores the first argument) should be completely compatible with the
+ * following.
+ */
+typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp,
+    png_alloc_size_t));
+typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp));
+
+typedef png_struct FAR * FAR * png_structpp;
+
+/* Section 3: exported functions
+ * Here are the function definitions most commonly used.  This is not
+ * the place to find out how to use libpng.  See libpng-manual.txt for the
+ * full explanation, see example.c for the summary.  This just provides
+ * a simple one line description of the use of each function.
+ *
+ * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in
+ * pngconf.h and in the *.dfn files in the scripts directory.
+ *
+ *   PNG_EXPORT(ordinal, type, name, (args));
+ *
+ *       ordinal:    ordinal that is used while building
+ *                   *.def files. The ordinal value is only
+ *                   relevant when preprocessing png.h with
+ *                   the *.dfn files for building symbol table
+ *                   entries, and are removed by pngconf.h.
+ *       type:       return type of the function
+ *       name:       function name
+ *       args:       function arguments, with types
+ *
+ * When we wish to append attributes to a function prototype we use
+ * the PNG_EXPORTA() macro instead.
+ *
+ *   PNG_EXPORTA(ordinal, type, name, (args), attributes);
+ *
+ *       ordinal, type, name, and args: same as in PNG_EXPORT().
+ *       attributes: function attributes
+ */
+
+/* Returns the version number of the library */
+PNG_EXPORT(1, png_uint_32, png_access_version_number, (void));
+
+/* Tell lib we have already handled the first <num_bytes> magic bytes.
+ * Handling more than 8 bytes from the beginning of the file is an error.
+ */
+PNG_EXPORT(2, void, png_set_sig_bytes, (png_structp png_ptr, int num_bytes));
+
+/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a
+ * PNG file.  Returns zero if the supplied bytes match the 8-byte PNG
+ * signature, and non-zero otherwise.  Having num_to_check == 0 or
+ * start > 7 will always fail (ie return non-zero).
+ */
+PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, png_size_t start,
+    png_size_t num_to_check));
+
+/* Simple signature checking function.  This is the same as calling
+ * png_check_sig(sig, n) := !png_sig_cmp(sig, 0, n).
+ */
+#define png_check_sig(sig, n) !png_sig_cmp((sig), 0, (n))
+
+/* Allocate and initialize png_ptr struct for reading, and any other memory. */
+PNG_EXPORTA(4, png_structp, png_create_read_struct,
+    (png_const_charp user_png_ver, png_voidp error_ptr,
+    png_error_ptr error_fn, png_error_ptr warn_fn),
+    PNG_ALLOCATED);
+
+/* Allocate and initialize png_ptr struct for writing, and any other memory */
+PNG_EXPORTA(5, png_structp, png_create_write_struct,
+    (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn,
+    png_error_ptr warn_fn),
+    PNG_ALLOCATED);
+
+PNG_EXPORT(6, png_size_t, png_get_compression_buffer_size,
+    (png_const_structp png_ptr));
+
+PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structp png_ptr,
+    png_size_t size));
+
+/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp
+ * match up.
+ */
+#ifdef PNG_SETJMP_SUPPORTED
+/* This function returns the jmp_buf built in to *png_ptr.  It must be
+ * supplied with an appropriate 'longjmp' function to use on that jmp_buf
+ * unless the default error function is overridden in which case NULL is
+ * acceptable.  The size of the jmp_buf is checked against the actual size
+ * allocated by the library - the call will return NULL on a mismatch
+ * indicating an ABI mismatch.
+ */
+PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structp png_ptr,
+    png_longjmp_ptr longjmp_fn, size_t jmp_buf_size));
+#  define png_jmpbuf(png_ptr) \
+      (*png_set_longjmp_fn((png_ptr), longjmp, sizeof (jmp_buf)))
+#else
+#  define png_jmpbuf(png_ptr) \
+      (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP)
+#endif
+/* This function should be used by libpng applications in place of
+ * longjmp(png_ptr->jmpbuf, val).  If longjmp_fn() has been set, it
+ * will use it; otherwise it will call PNG_ABORT().  This function was
+ * added in libpng-1.5.0.
+ */
+PNG_EXPORTA(9, void, png_longjmp, (png_structp png_ptr, int val),
+    PNG_NORETURN);
+
+#ifdef PNG_READ_SUPPORTED
+/* Reset the compression stream */
+PNG_EXPORT(10, int, png_reset_zstream, (png_structp png_ptr));
+#endif
+
+/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */
+#ifdef PNG_USER_MEM_SUPPORTED
+PNG_EXPORTA(11, png_structp, png_create_read_struct_2,
+    (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn,
+    png_error_ptr warn_fn,
+    png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn),
+    PNG_ALLOCATED);
+PNG_EXPORTA(12, png_structp, png_create_write_struct_2,
+    (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn,
+    png_error_ptr warn_fn,
+    png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn),
+    PNG_ALLOCATED);
+#endif
+
+/* Write the PNG file signature. */
+PNG_EXPORT(13, void, png_write_sig, (png_structp png_ptr));
+
+/* Write a PNG chunk - size, type, (optional) data, CRC. */
+PNG_EXPORT(14, void, png_write_chunk, (png_structp png_ptr, png_const_bytep
+    chunk_name, png_const_bytep data, png_size_t length));
+
+/* Write the start of a PNG chunk - length and chunk name. */
+PNG_EXPORT(15, void, png_write_chunk_start, (png_structp png_ptr,
+    png_const_bytep chunk_name, png_uint_32 length));
+
+/* Write the data of a PNG chunk started with png_write_chunk_start(). */
+PNG_EXPORT(16, void, png_write_chunk_data, (png_structp png_ptr,
+    png_const_bytep data, png_size_t length));
+
+/* Finish a chunk started with png_write_chunk_start() (includes CRC). */
+PNG_EXPORT(17, void, png_write_chunk_end, (png_structp png_ptr));
+
+/* Allocate and initialize the info structure */
+PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_structp png_ptr),
+    PNG_ALLOCATED);
+
+PNG_EXPORT(19, void, png_info_init_3, (png_infopp info_ptr,
+    png_size_t png_info_struct_size));
+
+/* Writes all the PNG information before the image. */
+PNG_EXPORT(20, void, png_write_info_before_PLTE,
+    (png_structp png_ptr, png_infop info_ptr));
+PNG_EXPORT(21, void, png_write_info,
+    (png_structp png_ptr, png_infop info_ptr));
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read the information before the actual image data. */
+PNG_EXPORT(22, void, png_read_info,
+    (png_structp png_ptr, png_infop info_ptr));
+#endif
+
+#ifdef PNG_TIME_RFC1123_SUPPORTED
+PNG_EXPORT(23, png_const_charp, png_convert_to_rfc1123,
+    (png_structp png_ptr,
+    png_const_timep ptime));
+#endif
+
+#ifdef PNG_CONVERT_tIME_SUPPORTED
+/* Convert from a struct tm to png_time */
+PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime,
+    PNG_CONST struct tm FAR * ttime));
+
+/* Convert from time_t to png_time.  Uses gmtime() */
+PNG_EXPORT(25, void, png_convert_from_time_t,
+    (png_timep ptime, time_t ttime));
+#endif /* PNG_CONVERT_tIME_SUPPORTED */
+
+#ifdef PNG_READ_EXPAND_SUPPORTED
+/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */
+PNG_EXPORT(26, void, png_set_expand, (png_structp png_ptr));
+PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structp png_ptr));
+PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structp png_ptr));
+PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_EXPAND_16_SUPPORTED
+/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion
+ * of a tRNS chunk if present.
+ */
+PNG_EXPORT(221, void, png_set_expand_16, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED)
+/* Use blue, green, red order for pixels. */
+PNG_EXPORT(30, void, png_set_bgr, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED
+/* Expand the grayscale to 24-bit RGB if necessary. */
+PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED
+/* Reduce RGB to grayscale. */
+#define PNG_ERROR_ACTION_NONE  1
+#define PNG_ERROR_ACTION_WARN  2
+#define PNG_ERROR_ACTION_ERROR 3
+#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/
+
+PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structp png_ptr,
+    int error_action, double red, double green))
+PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structp png_ptr,
+    int error_action, png_fixed_point red, png_fixed_point green))
+
+PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structp
+    png_ptr));
+#endif
+
+#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED
+PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth,
+    png_colorp palette));
+#endif
+
+#ifdef PNG_READ_ALPHA_MODE_SUPPORTED
+/* How the alpha channel is interpreted - this affects how the color channels of
+ * a PNG file are returned when an alpha channel, or tRNS chunk in a palette
+ * file, is present.
+ *
+ * This has no effect on the way pixels are written into a PNG output
+ * datastream. The color samples in a PNG datastream are never premultiplied
+ * with the alpha samples.
+ *
+ * The default is to return data according to the PNG specification: the alpha
+ * channel is a linear measure of the contribution of the pixel to the
+ * corresponding composited pixel.  The gamma encoded color channels must be
+ * scaled according to the contribution and to do this it is necessary to undo
+ * the encoding, scale the color values, perform the composition and reencode
+ * the values.  This is the 'PNG' mode.
+ *
+ * The alternative is to 'associate' the alpha with the color information by
+ * storing color channel values that have been scaled by the alpha.  The
+ * advantage is that the color channels can be resampled (the image can be
+ * scaled) in this form.  The disadvantage is that normal practice is to store
+ * linear, not (gamma) encoded, values and this requires 16-bit channels for
+ * still images rather than the 8-bit channels that are just about sufficient if
+ * gamma encoding is used.  In addition all non-transparent pixel values,
+ * including completely opaque ones, must be gamma encoded to produce the final
+ * image.  This is the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' mode (the
+ * latter being the two common names for associated alpha color channels.)
+ *
+ * Since it is not necessary to perform arithmetic on opaque color values so
+ * long as they are not to be resampled and are in the final color space it is
+ * possible to optimize the handling of alpha by storing the opaque pixels in
+ * the PNG format (adjusted for the output color space) while storing partially
+ * opaque pixels in the standard, linear, format.  The accuracy required for
+ * standard alpha composition is relatively low, because the pixels are
+ * isolated, therefore typically the accuracy loss in storing 8-bit linear
+ * values is acceptable.  (This is not true if the alpha channel is used to
+ * simulate transparency over large areas - use 16 bits or the PNG mode in
+ * this case!)  This is the 'OPTIMIZED' mode.  For this mode a pixel is
+ * treated as opaque only if the alpha value is equal to the maximum value.
+ *
+ * The final choice is to gamma encode the alpha channel as well.  This is
+ * broken because, in practice, no implementation that uses this choice
+ * correctly undoes the encoding before handling alpha composition.  Use this
+ * choice only if other serious errors in the software or hardware you use
+ * mandate it; the typical serious error is for dark halos to appear around
+ * opaque areas of the composited PNG image because of arithmetic overflow.
+ *
+ * The API function png_set_alpha_mode specifies which of these choices to use
+ * with an enumerated 'mode' value and the gamma of the required output:
+ */
+#define PNG_ALPHA_PNG           0 /* according to the PNG standard */
+#define PNG_ALPHA_STANDARD      1 /* according to Porter/Duff */
+#define PNG_ALPHA_ASSOCIATED    1 /* as above; this is the normal practice */
+#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */
+#define PNG_ALPHA_OPTIMIZED     2 /* 'PNG' for opaque pixels, else 'STANDARD' */
+#define PNG_ALPHA_BROKEN        3 /* the alpha channel is gamma encoded */
+
+PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structp png_ptr, int mode,
+    double output_gamma))
+PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structp png_ptr,
+    int mode, png_fixed_point output_gamma))
+#endif
+
+#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED)
+/* The output_gamma value is a screen gamma in libpng terminology: it expresses
+ * how to decode the output values, not how they are encoded.  The values used
+ * correspond to the normal numbers used to describe the overall gamma of a
+ * computer display system; for example 2.2 for an sRGB conformant system.  The
+ * values are scaled by 100000 in the _fixed version of the API (so 220000 for
+ * sRGB.)
+ *
+ * The inverse of the value is always used to provide a default for the PNG file
+ * encoding if it has no gAMA chunk and if png_set_gamma() has not been called
+ * to override the PNG gamma information.
+ *
+ * When the ALPHA_OPTIMIZED mode is selected the output gamma is used to encode
+ * opaque pixels however pixels with lower alpha values are not encoded,
+ * regardless of the output gamma setting.
+ *
+ * When the standard Porter Duff handling is requested with mode 1 the output
+ * encoding is set to be linear and the output_gamma value is only relevant
+ * as a default for input data that has no gamma information.  The linear output
+ * encoding will be overridden if png_set_gamma() is called - the results may be
+ * highly unexpected!
+ *
+ * The following numbers are derived from the sRGB standard and the research
+ * behind it.  sRGB is defined to be approximated by a PNG gAMA chunk value of
+ * 0.45455 (1/2.2) for PNG.  The value implicitly includes any viewing
+ * correction required to take account of any differences in the color
+ * environment of the original scene and the intended display environment; the
+ * value expresses how to *decode* the image for display, not how the original
+ * data was *encoded*.
+ *
+ * sRGB provides a peg for the PNG standard by defining a viewing environment.
+ * sRGB itself, and earlier TV standards, actually use a more complex transform
+ * (a linear portion then a gamma 2.4 power law) than PNG can express.  (PNG is
+ * limited to simple power laws.)  By saying that an image for direct display on
+ * an sRGB conformant system should be stored with a gAMA chunk value of 45455
+ * (11.3.3.2 and 11.3.3.5 of the ISO PNG specification) the PNG specification
+ * makes it possible to derive values for other display systems and
+ * environments.
+ *
+ * The Mac value is deduced from the sRGB based on an assumption that the actual
+ * extra viewing correction used in early Mac display systems was implemented as
+ * a power 1.45 lookup table.
+ *
+ * Any system where a programmable lookup table is used or where the behavior of
+ * the final display device characteristics can be changed requires system
+ * specific code to obtain the current characteristic.  However this can be
+ * difficult and most PNG gamma correction only requires an approximate value.
+ *
+ * By default, if png_set_alpha_mode() is not called, libpng assumes that all
+ * values are unencoded, linear, values and that the output device also has a
+ * linear characteristic.  This is only very rarely correct - it is invariably
+ * better to call png_set_alpha_mode() with PNG_DEFAULT_sRGB than rely on the
+ * default if you don't know what the right answer is!
+ *
+ * The special value PNG_GAMMA_MAC_18 indicates an older Mac system (pre Mac OS
+ * 10.6) which used a correction table to implement a somewhat lower gamma on an
+ * otherwise sRGB system.
+ *
+ * Both these values are reserved (not simple gamma values) in order to allow
+ * more precise correction internally in the future.
+ *
+ * NOTE: the following values can be passed to either the fixed or floating
+ * point APIs, but the floating point API will also accept floating point
+ * values.
+ */
+#define PNG_DEFAULT_sRGB -1       /* sRGB gamma and color space */
+#define PNG_GAMMA_MAC_18 -2       /* Old Mac '1.8' gamma and color space */
+#define PNG_GAMMA_sRGB   220000   /* Television standards--matches sRGB gamma */
+#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */
+#endif
+
+/* The following are examples of calls to png_set_alpha_mode to achieve the
+ * required overall gamma correction and, where necessary, alpha
+ * premultiplication.
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB);
+ *    This is the default libpng handling of the alpha channel - it is not
+ *    pre-multiplied into the color components.  In addition the call states
+ *    that the output is for a sRGB system and causes all PNG files without gAMA
+ *    chunks to be assumed to be encoded using sRGB.
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC);
+ *    In this case the output is assumed to be something like an sRGB conformant
+ *    display preceeded by a power-law lookup table of power 1.45.  This is how
+ *    early Mac systems behaved.
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR);
+ *    This is the classic Jim Blinn approach and will work in academic
+ *    environments where everything is done by the book.  It has the shortcoming
+ *    of assuming that input PNG data with no gamma information is linear - this
+ *    is unlikely to be correct unless the PNG files where generated locally.
+ *    Most of the time the output precision will be so low as to show
+ *    significant banding in dark areas of the image.
+ *
+ * png_set_expand_16(pp);
+ * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB);
+ *    This is a somewhat more realistic Jim Blinn inspired approach.  PNG files
+ *    are assumed to have the sRGB encoding if not marked with a gamma value and
+ *    the output is always 16 bits per component.  This permits accurate scaling
+ *    and processing of the data.  If you know that your input PNG files were
+ *    generated locally you might need to replace PNG_DEFAULT_sRGB with the
+ *    correct value for your system.
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB);
+ *    If you just need to composite the PNG image onto an existing background
+ *    and if you control the code that does this you can use the optimization
+ *    setting.  In this case you just copy completely opaque pixels to the
+ *    output.  For pixels that are not completely transparent (you just skip
+ *    those) you do the composition math using png_composite or png_composite_16
+ *    below then encode the resultant 8-bit or 16-bit values to match the output
+ *    encoding.
+ *
+ * Other cases
+ *    If neither the PNG nor the standard linear encoding work for you because
+ *    of the software or hardware you use then you have a big problem.  The PNG
+ *    case will probably result in halos around the image.  The linear encoding
+ *    will probably result in a washed out, too bright, image (it's actually too
+ *    contrasty.)  Try the ALPHA_OPTIMIZED mode above - this will probably
+ *    substantially reduce the halos.  Alternatively try:
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB);
+ *    This option will also reduce the halos, but there will be slight dark
+ *    halos round the opaque parts of the image where the background is light.
+ *    In the OPTIMIZED mode the halos will be light halos where the background
+ *    is dark.  Take your pick - the halos are unavoidable unless you can get
+ *    your hardware/software fixed!  (The OPTIMIZED approach is slightly
+ *    faster.)
+ *
+ * When the default gamma of PNG files doesn't match the output gamma.
+ *    If you have PNG files with no gamma information png_set_alpha_mode allows
+ *    you to provide a default gamma, but it also sets the ouput gamma to the
+ *    matching value.  If you know your PNG files have a gamma that doesn't
+ *    match the output you can take advantage of the fact that
+ *    png_set_alpha_mode always sets the output gamma but only sets the PNG
+ *    default if it is not already set:
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB);
+ * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC);
+ *    The first call sets both the default and the output gamma values, the
+ *    second call overrides the output gamma without changing the default.  This
+ *    is easier than achieving the same effect with png_set_gamma.  You must use
+ *    PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will
+ *    fire if more than one call to png_set_alpha_mode and png_set_background is
+ *    made in the same read operation, however multiple calls with PNG_ALPHA_PNG
+ *    are ignored.
+ */
+
+#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED
+PNG_EXPORT(36, void, png_set_strip_alpha, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \
+    defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED)
+PNG_EXPORT(37, void, png_set_swap_alpha, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \
+    defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED)
+PNG_EXPORT(38, void, png_set_invert_alpha, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED)
+/* Add a filler byte to 8-bit Gray or 24-bit RGB images. */
+PNG_EXPORT(39, void, png_set_filler, (png_structp png_ptr, png_uint_32 filler,
+    int flags));
+/* The values of the PNG_FILLER_ defines should NOT be changed */
+#  define PNG_FILLER_BEFORE 0
+#  define PNG_FILLER_AFTER 1
+/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */
+PNG_EXPORT(40, void, png_set_add_alpha,
+    (png_structp png_ptr, png_uint_32 filler,
+    int flags));
+#endif /* PNG_READ_FILLER_SUPPORTED || PNG_WRITE_FILLER_SUPPORTED */
+
+#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED)
+/* Swap bytes in 16-bit depth files. */
+PNG_EXPORT(41, void, png_set_swap, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED)
+/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */
+PNG_EXPORT(42, void, png_set_packing, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \
+    defined(PNG_WRITE_PACKSWAP_SUPPORTED)
+/* Swap packing order of pixels in bytes. */
+PNG_EXPORT(43, void, png_set_packswap, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED)
+/* Converts files to legal bit depths. */
+PNG_EXPORT(44, void, png_set_shift, (png_structp png_ptr, png_const_color_8p
+    true_bits));
+#endif
+
+#if defined(PNG_READ_INTERLACING_SUPPORTED) || \
+    defined(PNG_WRITE_INTERLACING_SUPPORTED)
+/* Have the code handle the interlacing.  Returns the number of passes.
+ * MUST be called before png_read_update_info or png_start_read_image,
+ * otherwise it will not have the desired effect.  Note that it is still
+ * necessary to call png_read_row or png_read_rows png_get_image_height
+ * times for each pass.
+*/
+PNG_EXPORT(45, int, png_set_interlace_handling, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED)
+/* Invert monochrome files */
+PNG_EXPORT(46, void, png_set_invert_mono, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_BACKGROUND_SUPPORTED
+/* Handle alpha and tRNS by replacing with a background color.  Prior to
+ * libpng-1.5.4 this API must not be called before the PNG file header has been
+ * read.  Doing so will result in unexpected behavior and possible warnings or
+ * errors if the PNG file contains a bKGD chunk.
+ */
+PNG_FP_EXPORT(47, void, png_set_background, (png_structp png_ptr,
+    png_const_color_16p background_color, int background_gamma_code,
+    int need_expand, double background_gamma))
+PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structp png_ptr,
+    png_const_color_16p background_color, int background_gamma_code,
+    int need_expand, png_fixed_point background_gamma))
+#endif
+#ifdef PNG_READ_BACKGROUND_SUPPORTED
+#  define PNG_BACKGROUND_GAMMA_UNKNOWN 0
+#  define PNG_BACKGROUND_GAMMA_SCREEN  1
+#  define PNG_BACKGROUND_GAMMA_FILE    2
+#  define PNG_BACKGROUND_GAMMA_UNIQUE  3
+#endif
+
+#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED
+/* Scale a 16-bit depth file down to 8-bit, accurately. */
+PNG_EXPORT(229, void, png_set_scale_16, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED
+#define PNG_READ_16_TO_8 SUPPORTED /* Name prior to 1.5.4 */
+/* Strip the second byte of information from a 16-bit depth file. */
+PNG_EXPORT(48, void, png_set_strip_16, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_QUANTIZE_SUPPORTED
+/* Turn on quantizing, and reduce the palette to the number of colors
+ * available.
+ */
+PNG_EXPORT(49, void, png_set_quantize,
+    (png_structp png_ptr, png_colorp palette,
+    int num_palette, int maximum_colors, png_const_uint_16p histogram,
+    int full_quantize));
+#endif
+
+#ifdef PNG_READ_GAMMA_SUPPORTED
+/* The threshold on gamma processing is configurable but hard-wired into the
+ * library.  The following is the floating point variant.
+ */
+#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001)
+
+/* Handle gamma correction. Screen_gamma=(display_exponent).
+ * NOTE: this API simply sets the screen and file gamma values. It will
+ * therefore override the value for gamma in a PNG file if it is called after
+ * the file header has been read - use with care  - call before reading the PNG
+ * file for best results!
+ *
+ * These routines accept the same gamma values as png_set_alpha_mode (described
+ * above).  The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either
+ * API (floating point or fixed.)  Notice, however, that the 'file_gamma' value
+ * is the inverse of a 'screen gamma' value.
+ */
+PNG_FP_EXPORT(50, void, png_set_gamma,
+    (png_structp png_ptr, double screen_gamma,
+    double override_file_gamma))
+PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structp png_ptr,
+    png_fixed_point screen_gamma, png_fixed_point override_file_gamma))
+#endif
+
+#ifdef PNG_WRITE_FLUSH_SUPPORTED
+/* Set how many lines between output flushes - 0 for no flushing */
+PNG_EXPORT(51, void, png_set_flush, (png_structp png_ptr, int nrows));
+/* Flush the current PNG output buffer */
+PNG_EXPORT(52, void, png_write_flush, (png_structp png_ptr));
+#endif
+
+/* Optional update palette with requested transformations */
+PNG_EXPORT(53, void, png_start_read_image, (png_structp png_ptr));
+
+/* Optional call to update the users info structure */
+PNG_EXPORT(54, void, png_read_update_info,
+    (png_structp png_ptr, png_infop info_ptr));
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read one or more rows of image data. */
+PNG_EXPORT(55, void, png_read_rows, (png_structp png_ptr, png_bytepp row,
+    png_bytepp display_row, png_uint_32 num_rows));
+#endif
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read a row of data. */
+PNG_EXPORT(56, void, png_read_row, (png_structp png_ptr, png_bytep row,
+    png_bytep display_row));
+#endif
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read the whole image into memory at once. */
+PNG_EXPORT(57, void, png_read_image, (png_structp png_ptr, png_bytepp image));
+#endif
+
+/* Write a row of image data */
+PNG_EXPORT(58, void, png_write_row,
+    (png_structp png_ptr, png_const_bytep row));
+
+/* Write a few rows of image data: (*row) is not written; however, the type
+ * is declared as writeable to maintain compatibility with previous versions
+ * of libpng and to allow the 'display_row' array from read_rows to be passed
+ * unchanged to write_rows.
+ */
+PNG_EXPORT(59, void, png_write_rows, (png_structp png_ptr, png_bytepp row,
+    png_uint_32 num_rows));
+
+/* Write the image data */
+PNG_EXPORT(60, void, png_write_image,
+    (png_structp png_ptr, png_bytepp image));
+
+/* Write the end of the PNG file. */
+PNG_EXPORT(61, void, png_write_end,
+    (png_structp png_ptr, png_infop info_ptr));
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read the end of the PNG file. */
+PNG_EXPORT(62, void, png_read_end, (png_structp png_ptr, png_infop info_ptr));
+#endif
+
+/* Free any memory associated with the png_info_struct */
+PNG_EXPORT(63, void, png_destroy_info_struct, (png_structp png_ptr,
+    png_infopp info_ptr_ptr));
+
+/* Free any memory associated with the png_struct and the png_info_structs */
+PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr,
+    png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr));
+
+/* Free any memory associated with the png_struct and the png_info_structs */
+PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr,
+    png_infopp info_ptr_ptr));
+
+/* Set the libpng method of handling chunk CRC errors */
+PNG_EXPORT(66, void, png_set_crc_action,
+    (png_structp png_ptr, int crit_action, int ancil_action));
+
+/* Values for png_set_crc_action() say how to handle CRC errors in
+ * ancillary and critical chunks, and whether to use the data contained
+ * therein.  Note that it is impossible to "discard" data in a critical
+ * chunk.  For versions prior to 0.90, the action was always error/quit,
+ * whereas in version 0.90 and later, the action for CRC errors in ancillary
+ * chunks is warn/discard.  These values should NOT be changed.
+ *
+ *      value                       action:critical     action:ancillary
+ */
+#define PNG_CRC_DEFAULT       0  /* error/quit          warn/discard data */
+#define PNG_CRC_ERROR_QUIT    1  /* error/quit          error/quit        */
+#define PNG_CRC_WARN_DISCARD  2  /* (INVALID)           warn/discard data */
+#define PNG_CRC_WARN_USE      3  /* warn/use data       warn/use data     */
+#define PNG_CRC_QUIET_USE     4  /* quiet/use data      quiet/use data    */
+#define PNG_CRC_NO_CHANGE     5  /* use current value   use current value */
+
+/* These functions give the user control over the scan-line filtering in
+ * libpng and the compression methods used by zlib.  These functions are
+ * mainly useful for testing, as the defaults should work with most users.
+ * Those users who are tight on memory or want faster performance at the
+ * expense of compression can modify them.  See the compression library
+ * header file (zlib.h) for an explination of the compression functions.
+ */
+
+/* Set the filtering method(s) used by libpng.  Currently, the only valid
+ * value for "method" is 0.
+ */
+PNG_EXPORT(67, void, png_set_filter,
+    (png_structp png_ptr, int method, int filters));
+
+/* Flags for png_set_filter() to say which filters to use.  The flags
+ * are chosen so that they don't conflict with real filter types
+ * below, in case they are supplied instead of the #defined constants.
+ * These values should NOT be changed.
+ */
+#define PNG_NO_FILTERS     0x00
+#define PNG_FILTER_NONE    0x08
+#define PNG_FILTER_SUB     0x10
+#define PNG_FILTER_UP      0x20
+#define PNG_FILTER_AVG     0x40
+#define PNG_FILTER_PAETH   0x80
+#define PNG_ALL_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP | \
+                         PNG_FILTER_AVG | PNG_FILTER_PAETH)
+
+/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now.
+ * These defines should NOT be changed.
+ */
+#define PNG_FILTER_VALUE_NONE  0
+#define PNG_FILTER_VALUE_SUB   1
+#define PNG_FILTER_VALUE_UP    2
+#define PNG_FILTER_VALUE_AVG   3
+#define PNG_FILTER_VALUE_PAETH 4
+#define PNG_FILTER_VALUE_LAST  5
+
+#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* EXPERIMENTAL */
+/* The "heuristic_method" is given by one of the PNG_FILTER_HEURISTIC_
+ * defines, either the default (minimum-sum-of-absolute-differences), or
+ * the experimental method (weighted-minimum-sum-of-absolute-differences).
+ *
+ * Weights are factors >= 1.0, indicating how important it is to keep the
+ * filter type consistent between rows.  Larger numbers mean the current
+ * filter is that many times as likely to be the same as the "num_weights"
+ * previous filters.  This is cumulative for each previous row with a weight.
+ * There needs to be "num_weights" values in "filter_weights", or it can be
+ * NULL if the weights aren't being specified.  Weights have no influence on
+ * the selection of the first row filter.  Well chosen weights can (in theory)
+ * improve the compression for a given image.
+ *
+ * Costs are factors >= 1.0 indicating the relative decoding costs of a
+ * filter type.  Higher costs indicate more decoding expense, and are
+ * therefore less likely to be selected over a filter with lower computational
+ * costs.  There needs to be a value in "filter_costs" for each valid filter
+ * type (given by PNG_FILTER_VALUE_LAST), or it can be NULL if you aren't
+ * setting the costs.  Costs try to improve the speed of decompression without
+ * unduly increasing the compressed image size.
+ *
+ * A negative weight or cost indicates the default value is to be used, and
+ * values in the range [0.0, 1.0) indicate the value is to remain unchanged.
+ * The default values for both weights and costs are currently 1.0, but may
+ * change if good general weighting/cost heuristics can be found.  If both
+ * the weights and costs are set to 1.0, this degenerates the WEIGHTED method
+ * to the UNWEIGHTED method, but with added encoding time/computation.
+ */
+PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structp png_ptr,
+    int heuristic_method, int num_weights, png_const_doublep filter_weights,
+    png_const_doublep filter_costs))
+PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed,
+    (png_structp png_ptr,
+    int heuristic_method, int num_weights, png_const_fixed_point_p
+    filter_weights, png_const_fixed_point_p filter_costs))
+#endif /*  PNG_WRITE_WEIGHTED_FILTER_SUPPORTED */
+
+/* Heuristic used for row filter selection.  These defines should NOT be
+ * changed.
+ */
+#define PNG_FILTER_HEURISTIC_DEFAULT    0  /* Currently "UNWEIGHTED" */
+#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1  /* Used by libpng < 0.95 */
+#define PNG_FILTER_HEURISTIC_WEIGHTED   2  /* Experimental feature */
+#define PNG_FILTER_HEURISTIC_LAST       3  /* Not a valid value */
+
+#ifdef PNG_WRITE_SUPPORTED
+/* Set the library compression level.  Currently, valid values range from
+ * 0 - 9, corresponding directly to the zlib compression levels 0 - 9
+ * (0 - no compression, 9 - "maximal" compression).  Note that tests have
+ * shown that zlib compression levels 3-6 usually perform as well as level 9
+ * for PNG images, and do considerably fewer caclulations.  In the future,
+ * these values may not correspond directly to the zlib compression levels.
+ */
+PNG_EXPORT(69, void, png_set_compression_level,
+    (png_structp png_ptr, int level));
+
+PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structp png_ptr,
+    int mem_level));
+
+PNG_EXPORT(71, void, png_set_compression_strategy, (png_structp png_ptr,
+    int strategy));
+
+/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a
+ * smaller value of window_bits if it can do so safely.
+ */
+PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structp png_ptr,
+    int window_bits));
+
+PNG_EXPORT(73, void, png_set_compression_method, (png_structp png_ptr,
+    int method));
+#endif
+
+#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED
+/* Also set zlib parameters for compressing non-IDAT chunks */
+PNG_EXPORT(222, void, png_set_text_compression_level,
+    (png_structp png_ptr, int level));
+
+PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structp png_ptr,
+    int mem_level));
+
+PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structp png_ptr,
+    int strategy));
+
+/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a
+ * smaller value of window_bits if it can do so safely.
+ */
+PNG_EXPORT(225, void, png_set_text_compression_window_bits, (png_structp
+    png_ptr, int window_bits));
+
+PNG_EXPORT(226, void, png_set_text_compression_method, (png_structp png_ptr,
+    int method));
+#endif /* PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED */
+
+/* These next functions are called for input/output, memory, and error
+ * handling.  They are in the file pngrio.c, pngwio.c, and pngerror.c,
+ * and call standard C I/O routines such as fread(), fwrite(), and
+ * fprintf().  These functions can be made to use other I/O routines
+ * at run time for those applications that need to handle I/O in a
+ * different manner by calling png_set_???_fn().  See libpng-manual.txt for
+ * more information.
+ */
+
+#ifdef PNG_STDIO_SUPPORTED
+/* Initialize the input/output for the PNG file to the default functions. */
+PNG_EXPORT(74, void, png_init_io, (png_structp png_ptr, png_FILE_p fp));
+#endif
+
+/* Replace the (error and abort), and warning functions with user
+ * supplied functions.  If no messages are to be printed you must still
+ * write and use replacement functions. The replacement error_fn should
+ * still do a longjmp to the last setjmp location if you are using this
+ * method of error handling.  If error_fn or warning_fn is NULL, the
+ * default function will be used.
+ */
+
+PNG_EXPORT(75, void, png_set_error_fn,
+    (png_structp png_ptr, png_voidp error_ptr,
+    png_error_ptr error_fn, png_error_ptr warning_fn));
+
+/* Return the user pointer associated with the error functions */
+PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structp png_ptr));
+
+/* Replace the default data output functions with a user supplied one(s).
+ * If buffered output is not used, then output_flush_fn can be set to NULL.
+ * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time
+ * output_flush_fn will be ignored (and thus can be NULL).
+ * It is probably a mistake to use NULL for output_flush_fn if
+ * write_data_fn is not also NULL unless you have built libpng with
+ * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's
+ * default flush function, which uses the standard *FILE structure, will
+ * be used.
+ */
+PNG_EXPORT(77, void, png_set_write_fn, (png_structp png_ptr, png_voidp io_ptr,
+    png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn));
+
+/* Replace the default data input function with a user supplied one. */
+PNG_EXPORT(78, void, png_set_read_fn, (png_structp png_ptr, png_voidp io_ptr,
+    png_rw_ptr read_data_fn));
+
+/* Return the user pointer associated with the I/O functions */
+PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_structp png_ptr));
+
+PNG_EXPORT(80, void, png_set_read_status_fn, (png_structp png_ptr,
+    png_read_status_ptr read_row_fn));
+
+PNG_EXPORT(81, void, png_set_write_status_fn, (png_structp png_ptr,
+    png_write_status_ptr write_row_fn));
+
+#ifdef PNG_USER_MEM_SUPPORTED
+/* Replace the default memory allocation functions with user supplied one(s). */
+PNG_EXPORT(82, void, png_set_mem_fn, (png_structp png_ptr, png_voidp mem_ptr,
+    png_malloc_ptr malloc_fn, png_free_ptr free_fn));
+/* Return the user pointer associated with the memory functions */
+PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED
+PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structp png_ptr,
+    png_user_transform_ptr read_user_transform_fn));
+#endif
+
+#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED
+PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structp png_ptr,
+    png_user_transform_ptr write_user_transform_fn));
+#endif
+
+#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED
+PNG_EXPORT(86, void, png_set_user_transform_info, (png_structp png_ptr,
+    png_voidp user_transform_ptr, int user_transform_depth,
+    int user_transform_channels));
+/* Return the user pointer associated with the user transform functions */
+PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr,
+    (png_const_structp png_ptr));
+#endif
+
+#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED
+/* Return information about the row currently being processed.  Note that these
+ * APIs do not fail but will return unexpected results if called outside a user
+ * transform callback.  Also note that when transforming an interlaced image the
+ * row number is the row number within the sub-image of the interlace pass, so
+ * the value will increase to the height of the sub-image (not the full image)
+ * then reset to 0 for the next pass.
+ *
+ * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to
+ * find the output pixel (x,y) given an interlaced sub-image pixel
+ * (row,col,pass).  (See below for these macros.)
+ */
+PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structp));
+PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structp));
+#endif
+
+#ifdef PNG_USER_CHUNKS_SUPPORTED
+PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structp png_ptr,
+    png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn));
+PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structp png_ptr));
+#endif
+
+#ifdef PNG_PROGRESSIVE_READ_SUPPORTED
+/* Sets the function callbacks for the push reader, and a pointer to a
+ * user-defined structure available to the callback functions.
+ */
+PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structp png_ptr,
+    png_voidp progressive_ptr, png_progressive_info_ptr info_fn,
+    png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn));
+
+/* Returns the user pointer associated with the push read functions */
+PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, (png_const_structp png_ptr));
+
+/* Function to be called when data becomes available */
+PNG_EXPORT(92, void, png_process_data,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_bytep buffer, png_size_t buffer_size));
+
+/* A function which may be called *only* within png_process_data to stop the
+ * processing of any more data.  The function returns the number of bytes
+ * remaining, excluding any that libpng has cached internally.  A subsequent
+ * call to png_process_data must supply these bytes again.  If the argument
+ * 'save' is set to true the routine will first save all the pending data and
+ * will always return 0.
+ */
+PNG_EXPORT(219, png_size_t, png_process_data_pause, (png_structp, int save));
+
+/* A function which may be called *only* outside (after) a call to
+ * png_process_data.  It returns the number of bytes of data to skip in the
+ * input.  Normally it will return 0, but if it returns a non-zero value the
+ * application must skip than number of bytes of input data and pass the
+ * following data to the next call to png_process_data.
+ */
+PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structp));
+
+#ifdef PNG_READ_INTERLACING_SUPPORTED
+/* Function that combines rows.  'new_row' is a flag that should come from
+ * the callback and be non-NULL if anything needs to be done; the library
+ * stores its own version of the new data internally and ignores the passed
+ * in value.
+ */
+PNG_EXPORT(93, void, png_progressive_combine_row, (png_structp png_ptr,
+    png_bytep old_row, png_const_bytep new_row));
+#endif /* PNG_READ_INTERLACING_SUPPORTED */
+#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */
+
+PNG_EXPORTA(94, png_voidp, png_malloc,
+    (png_structp png_ptr, png_alloc_size_t size),
+    PNG_ALLOCATED);
+/* Added at libpng version 1.4.0 */
+PNG_EXPORTA(95, png_voidp, png_calloc,
+    (png_structp png_ptr, png_alloc_size_t size),
+    PNG_ALLOCATED);
+
+/* Added at libpng version 1.2.4 */
+PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_structp png_ptr,
+    png_alloc_size_t size), PNG_ALLOCATED);
+
+/* Frees a pointer allocated by png_malloc() */
+PNG_EXPORT(97, void, png_free, (png_structp png_ptr, png_voidp ptr));
+
+/* Free data that was allocated internally */
+PNG_EXPORT(98, void, png_free_data,
+    (png_structp png_ptr, png_infop info_ptr, png_uint_32 free_me, int num));
+
+/* Reassign responsibility for freeing existing data, whether allocated
+ * by libpng or by the application */
+PNG_EXPORT(99, void, png_data_freer,
+    (png_structp png_ptr, png_infop info_ptr, int freer, png_uint_32 mask));
+
+/* Assignments for png_data_freer */
+#define PNG_DESTROY_WILL_FREE_DATA 1
+#define PNG_SET_WILL_FREE_DATA 1
+#define PNG_USER_WILL_FREE_DATA 2
+/* Flags for png_ptr->free_me and info_ptr->free_me */
+#define PNG_FREE_HIST 0x0008
+#define PNG_FREE_ICCP 0x0010
+#define PNG_FREE_SPLT 0x0020
+#define PNG_FREE_ROWS 0x0040
+#define PNG_FREE_PCAL 0x0080
+#define PNG_FREE_SCAL 0x0100
+#define PNG_FREE_UNKN 0x0200
+#define PNG_FREE_LIST 0x0400
+#define PNG_FREE_PLTE 0x1000
+#define PNG_FREE_TRNS 0x2000
+#define PNG_FREE_TEXT 0x4000
+#define PNG_FREE_ALL  0x7fff
+#define PNG_FREE_MUL  0x4220 /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */
+
+#ifdef PNG_USER_MEM_SUPPORTED
+PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_structp png_ptr,
+    png_alloc_size_t size), PNG_ALLOCATED);
+PNG_EXPORT(101, void, png_free_default, (png_structp png_ptr, png_voidp ptr));
+#endif
+
+#ifdef PNG_ERROR_TEXT_SUPPORTED
+/* Fatal error in PNG image of libpng - can't continue */
+PNG_EXPORTA(102, void, png_error,
+    (png_structp png_ptr, png_const_charp error_message),
+    PNG_NORETURN);
+
+/* The same, but the chunk name is prepended to the error string. */
+PNG_EXPORTA(103, void, png_chunk_error, (png_structp png_ptr,
+    png_const_charp error_message), PNG_NORETURN);
+
+#else
+/* Fatal error in PNG image of libpng - can't continue */
+PNG_EXPORTA(104, void, png_err, (png_structp png_ptr), PNG_NORETURN);
+#endif
+
+#ifdef PNG_WARNINGS_SUPPORTED
+/* Non-fatal error in libpng.  Can continue, but may have a problem. */
+PNG_EXPORT(105, void, png_warning, (png_structp png_ptr,
+    png_const_charp warning_message));
+
+/* Non-fatal error in libpng, chunk name is prepended to message. */
+PNG_EXPORT(106, void, png_chunk_warning, (png_structp png_ptr,
+    png_const_charp warning_message));
+#endif
+
+#ifdef PNG_BENIGN_ERRORS_SUPPORTED
+/* Benign error in libpng.  Can continue, but may have a problem.
+ * User can choose whether to handle as a fatal error or as a warning. */
+#  undef png_benign_error
+PNG_EXPORT(107, void, png_benign_error, (png_structp png_ptr,
+    png_const_charp warning_message));
+
+/* Same, chunk name is prepended to message. */
+#  undef png_chunk_benign_error
+PNG_EXPORT(108, void, png_chunk_benign_error, (png_structp png_ptr,
+    png_const_charp warning_message));
+
+PNG_EXPORT(109, void, png_set_benign_errors,
+    (png_structp png_ptr, int allowed));
+#else
+#  ifdef PNG_ALLOW_BENIGN_ERRORS
+#    define png_benign_error png_warning
+#    define png_chunk_benign_error png_chunk_warning
+#  else
+#    define png_benign_error png_error
+#    define png_chunk_benign_error png_chunk_error
+#  endif
+#endif
+
+/* The png_set_<chunk> functions are for storing values in the png_info_struct.
+ * Similarly, the png_get_<chunk> calls are used to read values from the
+ * png_info_struct, either storing the parameters in the passed variables, or
+ * setting pointers into the png_info_struct where the data is stored.  The
+ * png_get_<chunk> functions return a non-zero value if the data was available
+ * in info_ptr, or return zero and do not change any of the parameters if the
+ * data was not available.
+ *
+ * These functions should be used instead of directly accessing png_info
+ * to avoid problems with future changes in the size and internal layout of
+ * png_info_struct.
+ */
+/* Returns "flag" if chunk data is valid in info_ptr. */
+PNG_EXPORT(110, png_uint_32, png_get_valid,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_uint_32 flag));
+
+/* Returns number of bytes needed to hold a transformed row. */
+PNG_EXPORT(111, png_size_t, png_get_rowbytes, (png_const_structp png_ptr,
+    png_const_infop info_ptr));
+
+#ifdef PNG_INFO_IMAGE_SUPPORTED
+/* Returns row_pointers, which is an array of pointers to scanlines that was
+ * returned from png_read_png().
+ */
+PNG_EXPORT(112, png_bytepp, png_get_rows,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+/* Set row_pointers, which is an array of pointers to scanlines for use
+ * by png_write_png().
+ */
+PNG_EXPORT(113, void, png_set_rows, (png_structp png_ptr,
+    png_infop info_ptr, png_bytepp row_pointers));
+#endif
+
+/* Returns number of color channels in image. */
+PNG_EXPORT(114, png_byte, png_get_channels,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+
+#ifdef PNG_EASY_ACCESS_SUPPORTED
+/* Returns image width in pixels. */
+PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structp png_ptr,
+    png_const_infop info_ptr));
+
+/* Returns image height in pixels. */
+PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structp png_ptr,
+    png_const_infop info_ptr));
+
+/* Returns image bit_depth. */
+PNG_EXPORT(117, png_byte, png_get_bit_depth,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+
+/* Returns image color_type. */
+PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structp png_ptr,
+    png_const_infop info_ptr));
+
+/* Returns image filter_type. */
+PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structp png_ptr,
+    png_const_infop info_ptr));
+
+/* Returns image interlace_type. */
+PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structp png_ptr,
+    png_const_infop info_ptr));
+
+/* Returns image compression_type. */
+PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structp png_ptr,
+    png_const_infop info_ptr));
+
+/* Returns image resolution in pixels per meter, from pHYs chunk data. */
+PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+
+/* Returns pixel aspect ratio, computed from pHYs chunk data.  */
+PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio,
+    (png_const_structp png_ptr, png_const_infop info_ptr))
+PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed,
+    (png_const_structp png_ptr, png_const_infop info_ptr))
+
+/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */
+PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(128, png_int_32, png_get_x_offset_microns,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(129, png_int_32, png_get_y_offset_microns,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+
+#endif /* PNG_EASY_ACCESS_SUPPORTED */
+
+/* Returns pointer to signature string read from PNG header */
+PNG_EXPORT(130, png_const_bytep, png_get_signature,
+    (png_const_structp png_ptr, png_infop info_ptr));
+
+#ifdef PNG_bKGD_SUPPORTED
+PNG_EXPORT(131, png_uint_32, png_get_bKGD,
+    (png_const_structp png_ptr, png_infop info_ptr,
+    png_color_16p *background));
+#endif
+
+#ifdef PNG_bKGD_SUPPORTED
+PNG_EXPORT(132, void, png_set_bKGD, (png_structp png_ptr, png_infop info_ptr,
+    png_const_color_16p background));
+#endif
+
+#ifdef PNG_cHRM_SUPPORTED
+PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structp png_ptr,
+   png_const_infop info_ptr, double *white_x, double *white_y, double *red_x,
+    double *red_y, double *green_x, double *green_y, double *blue_x,
+    double *blue_y))
+PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_structp png_ptr,
+    png_const_infop info_ptr, double *red_X, double *red_Y, double *red_Z,
+    double *green_X, double *green_Y, double *green_Z, double *blue_X,
+    double *blue_Y, double *blue_Z))
+#ifdef PNG_FIXED_POINT_SUPPORTED /* Otherwise not implemented */
+PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed,
+    (png_const_structp png_ptr,
+    png_const_infop info_ptr, png_fixed_point *int_white_x,
+    png_fixed_point *int_white_y, png_fixed_point *int_red_x,
+    png_fixed_point *int_red_y, png_fixed_point *int_green_x,
+    png_fixed_point *int_green_y, png_fixed_point *int_blue_x,
+    png_fixed_point *int_blue_y))
+#endif
+PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed,
+    (png_structp png_ptr, png_const_infop info_ptr,
+    png_fixed_point *int_red_X, png_fixed_point *int_red_Y,
+    png_fixed_point *int_red_Z, png_fixed_point *int_green_X,
+    png_fixed_point *int_green_Y, png_fixed_point *int_green_Z,
+    png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y,
+    png_fixed_point *int_blue_Z))
+#endif
+
+#ifdef PNG_cHRM_SUPPORTED
+PNG_FP_EXPORT(135, void, png_set_cHRM,
+    (png_structp png_ptr, png_infop info_ptr,
+    double white_x, double white_y, double red_x, double red_y, double green_x,
+    double green_y, double blue_x, double blue_y))
+PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_structp png_ptr,
+    png_infop info_ptr, double red_X, double red_Y, double red_Z,
+    double green_X, double green_Y, double green_Z, double blue_X,
+    double blue_Y, double blue_Z))
+PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_structp png_ptr,
+    png_infop info_ptr, png_fixed_point int_white_x,
+    png_fixed_point int_white_y, png_fixed_point int_red_x,
+    png_fixed_point int_red_y, png_fixed_point int_green_x,
+    png_fixed_point int_green_y, png_fixed_point int_blue_x,
+    png_fixed_point int_blue_y))
+PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_structp png_ptr,
+    png_infop info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y,
+    png_fixed_point int_red_Z, png_fixed_point int_green_X,
+    png_fixed_point int_green_Y, png_fixed_point int_green_Z,
+    png_fixed_point int_blue_X, png_fixed_point int_blue_Y,
+    png_fixed_point int_blue_Z))
+#endif
+
+#ifdef PNG_gAMA_SUPPORTED
+PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    double *file_gamma))
+PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_fixed_point *int_file_gamma))
+#endif
+
+#ifdef PNG_gAMA_SUPPORTED
+PNG_FP_EXPORT(139, void, png_set_gAMA, (png_structp png_ptr,
+    png_infop info_ptr, double file_gamma))
+PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_structp png_ptr,
+    png_infop info_ptr, png_fixed_point int_file_gamma))
+#endif
+
+#ifdef PNG_hIST_SUPPORTED
+PNG_EXPORT(141, png_uint_32, png_get_hIST,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_uint_16p *hist));
+#endif
+
+#ifdef PNG_hIST_SUPPORTED
+PNG_EXPORT(142, void, png_set_hIST, (png_structp png_ptr,
+    png_infop info_ptr, png_const_uint_16p hist));
+#endif
+
+PNG_EXPORT(143, png_uint_32, png_get_IHDR,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_uint_32 *width, png_uint_32 *height, int *bit_depth, int *color_type,
+    int *interlace_method, int *compression_method, int *filter_method));
+
+PNG_EXPORT(144, void, png_set_IHDR,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_uint_32 width, png_uint_32 height, int bit_depth, int color_type,
+    int interlace_method, int compression_method, int filter_method));
+
+#ifdef PNG_oFFs_SUPPORTED
+PNG_EXPORT(145, png_uint_32, png_get_oFFs,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_int_32 *offset_x, png_int_32 *offset_y, int *unit_type));
+#endif
+
+#ifdef PNG_oFFs_SUPPORTED
+PNG_EXPORT(146, void, png_set_oFFs,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_int_32 offset_x, png_int_32 offset_y, int unit_type));
+#endif
+
+#ifdef PNG_pCAL_SUPPORTED
+PNG_EXPORT(147, png_uint_32, png_get_pCAL,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_charp *purpose, png_int_32 *X0, png_int_32 *X1, int *type,
+    int *nparams,
+    png_charp *units, png_charpp *params));
+#endif
+
+#ifdef PNG_pCAL_SUPPORTED
+PNG_EXPORT(148, void, png_set_pCAL, (png_structp png_ptr,
+    png_infop info_ptr,
+    png_const_charp purpose, png_int_32 X0, png_int_32 X1, int type,
+    int nparams, png_const_charp units, png_charpp params));
+#endif
+
+#ifdef PNG_pHYs_SUPPORTED
+PNG_EXPORT(149, png_uint_32, png_get_pHYs,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_uint_32 *res_x, png_uint_32 *res_y, int *unit_type));
+#endif
+
+#ifdef PNG_pHYs_SUPPORTED
+PNG_EXPORT(150, void, png_set_pHYs,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_uint_32 res_x, png_uint_32 res_y, int unit_type));
+#endif
+
+PNG_EXPORT(151, png_uint_32, png_get_PLTE,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_colorp *palette, int *num_palette));
+
+PNG_EXPORT(152, void, png_set_PLTE,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_const_colorp palette, int num_palette));
+
+#ifdef PNG_sBIT_SUPPORTED
+PNG_EXPORT(153, png_uint_32, png_get_sBIT,
+    (png_const_structp png_ptr, png_infop info_ptr,
+    png_color_8p *sig_bit));
+#endif
+
+#ifdef PNG_sBIT_SUPPORTED
+PNG_EXPORT(154, void, png_set_sBIT,
+    (png_structp png_ptr, png_infop info_ptr, png_const_color_8p sig_bit));
+#endif
+
+#ifdef PNG_sRGB_SUPPORTED
+PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structp png_ptr,
+    png_const_infop info_ptr, int *file_srgb_intent));
+#endif
+
+#ifdef PNG_sRGB_SUPPORTED
+PNG_EXPORT(156, void, png_set_sRGB,
+    (png_structp png_ptr, png_infop info_ptr, int srgb_intent));
+PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_structp png_ptr,
+    png_infop info_ptr, int srgb_intent));
+#endif
+
+#ifdef PNG_iCCP_SUPPORTED
+PNG_EXPORT(158, png_uint_32, png_get_iCCP,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_charpp name, int *compression_type, png_bytepp profile,
+    png_uint_32 *proflen));
+#endif
+
+#ifdef PNG_iCCP_SUPPORTED
+PNG_EXPORT(159, void, png_set_iCCP,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_const_charp name, int compression_type, png_const_bytep profile,
+    png_uint_32 proflen));
+#endif
+
+#ifdef PNG_sPLT_SUPPORTED
+PNG_EXPORT(160, png_uint_32, png_get_sPLT,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_sPLT_tpp entries));
+#endif
+
+#ifdef PNG_sPLT_SUPPORTED
+PNG_EXPORT(161, void, png_set_sPLT,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_const_sPLT_tp entries, int nentries));
+#endif
+
+#ifdef PNG_TEXT_SUPPORTED
+/* png_get_text also returns the number of text chunks in *num_text */
+PNG_EXPORT(162, png_uint_32, png_get_text,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    png_textp *text_ptr, int *num_text));
+#endif
+
+/* Note while png_set_text() will accept a structure whose text,
+ * language, and  translated keywords are NULL pointers, the structure
+ * returned by png_get_text will always contain regular
+ * zero-terminated C strings.  They might be empty strings but
+ * they will never be NULL pointers.
+ */
+
+#ifdef PNG_TEXT_SUPPORTED
+PNG_EXPORT(163, void, png_set_text,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_const_textp text_ptr, int num_text));
+#endif
+
+#ifdef PNG_tIME_SUPPORTED
+PNG_EXPORT(164, png_uint_32, png_get_tIME,
+    (png_const_structp png_ptr, png_infop info_ptr, png_timep *mod_time));
+#endif
+
+#ifdef PNG_tIME_SUPPORTED
+PNG_EXPORT(165, void, png_set_tIME,
+    (png_structp png_ptr, png_infop info_ptr, png_const_timep mod_time));
+#endif
+
+#ifdef PNG_tRNS_SUPPORTED
+PNG_EXPORT(166, png_uint_32, png_get_tRNS,
+    (png_const_structp png_ptr, png_infop info_ptr,
+    png_bytep *trans_alpha, int *num_trans, png_color_16p *trans_color));
+#endif
+
+#ifdef PNG_tRNS_SUPPORTED
+PNG_EXPORT(167, void, png_set_tRNS,
+    (png_structp png_ptr, png_infop info_ptr,
+    png_const_bytep trans_alpha, int num_trans,
+    png_const_color_16p trans_color));
+#endif
+
+#ifdef PNG_sCAL_SUPPORTED
+PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    int *unit, double *width, double *height))
+#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
+/* NOTE: this API is currently implemented using floating point arithmetic,
+ * consequently it can only be used on systems with floating point support.
+ * In any case the range of values supported by png_fixed_point is small and it
+ * is highly recommended that png_get_sCAL_s be used instead.
+ */
+PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed,
+    (png_structp png_ptr, png_const_infop info_ptr, int *unit,
+    png_fixed_point *width,
+    png_fixed_point *height))
+#endif
+PNG_EXPORT(169, png_uint_32, png_get_sCAL_s,
+    (png_const_structp png_ptr, png_const_infop info_ptr,
+    int *unit, png_charpp swidth, png_charpp sheight));
+
+PNG_FP_EXPORT(170, void, png_set_sCAL,
+    (png_structp png_ptr, png_infop info_ptr,
+    int unit, double width, double height))
+PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_structp png_ptr,
+   png_infop info_ptr, int unit, png_fixed_point width,
+   png_fixed_point height))
+PNG_EXPORT(171, void, png_set_sCAL_s,
+    (png_structp png_ptr, png_infop info_ptr,
+    int unit, png_const_charp swidth, png_const_charp sheight));
+#endif /* PNG_sCAL_SUPPORTED */
+
+#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED
+/* Provide a list of chunks and how they are to be handled, if the built-in
+   handling or default unknown chunk handling is not desired.  Any chunks not
+   listed will be handled in the default manner.  The IHDR and IEND chunks
+   must not be listed.  Because this turns off the default handling for chunks
+   that would otherwise be recognized the behavior of libpng transformations may
+   well become incorrect!
+      keep = 0: PNG_HANDLE_CHUNK_AS_DEFAULT: follow default behavior
+           = 1: PNG_HANDLE_CHUNK_NEVER:      do not keep
+           = 2: PNG_HANDLE_CHUNK_IF_SAFE:    keep only if safe-to-copy
+           = 3: PNG_HANDLE_CHUNK_ALWAYS:     keep even if unsafe-to-copy
+*/
+PNG_EXPORT(172, void, png_set_keep_unknown_chunks,
+    (png_structp png_ptr, int keep,
+    png_const_bytep chunk_list, int num_chunks));
+
+/* The handling code is returned; the result is therefore true (non-zero) if
+ * special handling is required, false for the default handling.
+ */
+PNG_EXPORT(173, int, png_handle_as_unknown, (png_structp png_ptr,
+    png_const_bytep chunk_name));
+#endif
+#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED
+PNG_EXPORT(174, void, png_set_unknown_chunks, (png_structp png_ptr,
+    png_infop info_ptr, png_const_unknown_chunkp unknowns,
+    int num_unknowns));
+PNG_EXPORT(175, void, png_set_unknown_chunk_location,
+    (png_structp png_ptr, png_infop info_ptr, int chunk, int location));
+PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structp png_ptr,
+    png_const_infop info_ptr, png_unknown_chunkpp entries));
+#endif
+
+/* Png_free_data() will turn off the "valid" flag for anything it frees.
+ * If you need to turn it off for a chunk that your application has freed,
+ * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK);
+ */
+PNG_EXPORT(177, void, png_set_invalid,
+    (png_structp png_ptr, png_infop info_ptr, int mask));
+
+#ifdef PNG_INFO_IMAGE_SUPPORTED
+/* The "params" pointer is currently not used and is for future expansion. */
+PNG_EXPORT(178, void, png_read_png, (png_structp png_ptr, png_infop info_ptr,
+    int transforms, png_voidp params));
+PNG_EXPORT(179, void, png_write_png, (png_structp png_ptr, png_infop info_ptr,
+    int transforms, png_voidp params));
+#endif
+
+PNG_EXPORT(180, png_const_charp, png_get_copyright,
+    (png_const_structp png_ptr));
+PNG_EXPORT(181, png_const_charp, png_get_header_ver,
+    (png_const_structp png_ptr));
+PNG_EXPORT(182, png_const_charp, png_get_header_version,
+    (png_const_structp png_ptr));
+PNG_EXPORT(183, png_const_charp, png_get_libpng_ver,
+    (png_const_structp png_ptr));
+
+#ifdef PNG_MNG_FEATURES_SUPPORTED
+PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structp png_ptr,
+    png_uint_32 mng_features_permitted));
+#endif
+
+/* For use in png_set_keep_unknown, added to version 1.2.6 */
+#define PNG_HANDLE_CHUNK_AS_DEFAULT   0
+#define PNG_HANDLE_CHUNK_NEVER        1
+#define PNG_HANDLE_CHUNK_IF_SAFE      2
+#define PNG_HANDLE_CHUNK_ALWAYS       3
+
+/* Strip the prepended error numbers ("#nnn ") from error and warning
+ * messages before passing them to the error or warning handler.
+ */
+#ifdef PNG_ERROR_NUMBERS_SUPPORTED
+PNG_EXPORT(185, void, png_set_strip_error_numbers,
+    (png_structp png_ptr,
+    png_uint_32 strip_mode));
+#endif
+
+/* Added in libpng-1.2.6 */
+#ifdef PNG_SET_USER_LIMITS_SUPPORTED
+PNG_EXPORT(186, void, png_set_user_limits, (png_structp png_ptr,
+    png_uint_32 user_width_max, png_uint_32 user_height_max));
+PNG_EXPORT(187, png_uint_32, png_get_user_width_max,
+    (png_const_structp png_ptr));
+PNG_EXPORT(188, png_uint_32, png_get_user_height_max,
+    (png_const_structp png_ptr));
+/* Added in libpng-1.4.0 */
+PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structp png_ptr,
+    png_uint_32 user_chunk_cache_max));
+PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max,
+    (png_const_structp png_ptr));
+/* Added in libpng-1.4.1 */
+PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structp png_ptr,
+    png_alloc_size_t user_chunk_cache_max));
+PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max,
+    (png_const_structp png_ptr));
+#endif
+
+#if defined(PNG_INCH_CONVERSIONS_SUPPORTED)
+PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+
+PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+
+PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch,
+    (png_const_structp png_ptr, png_const_infop info_ptr));
+
+PNG_FP_EXPORT(196, float, png_get_x_offset_inches,
+    (png_const_structp png_ptr, png_const_infop info_ptr))
+#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */
+PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed,
+    (png_structp png_ptr, png_const_infop info_ptr))
+#endif
+
+PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structp png_ptr,
+    png_const_infop info_ptr))
+#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */
+PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed,
+    (png_structp png_ptr, png_const_infop info_ptr))
+#endif
+
+#  ifdef PNG_pHYs_SUPPORTED
+PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structp png_ptr,
+    png_const_infop info_ptr, png_uint_32 *res_x, png_uint_32 *res_y,
+    int *unit_type));
+#  endif /* PNG_pHYs_SUPPORTED */
+#endif  /* PNG_INCH_CONVERSIONS_SUPPORTED */
+
+/* Added in libpng-1.4.0 */
+#ifdef PNG_IO_STATE_SUPPORTED
+PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_structp png_ptr));
+
+PNG_EXPORTA(200, png_const_bytep, png_get_io_chunk_name,
+    (png_structp png_ptr), PNG_DEPRECATED);
+PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type,
+    (png_const_structp png_ptr));
+
+/* The flags returned by png_get_io_state() are the following: */
+#  define PNG_IO_NONE        0x0000   /* no I/O at this moment */
+#  define PNG_IO_READING     0x0001   /* currently reading */
+#  define PNG_IO_WRITING     0x0002   /* currently writing */
+#  define PNG_IO_SIGNATURE   0x0010   /* currently at the file signature */
+#  define PNG_IO_CHUNK_HDR   0x0020   /* currently at the chunk header */
+#  define PNG_IO_CHUNK_DATA  0x0040   /* currently at the chunk data */
+#  define PNG_IO_CHUNK_CRC   0x0080   /* currently at the chunk crc */
+#  define PNG_IO_MASK_OP     0x000f   /* current operation: reading/writing */
+#  define PNG_IO_MASK_LOC    0x00f0   /* current location: sig/hdr/data/crc */
+#endif /* ?PNG_IO_STATE_SUPPORTED */
+
+/* Interlace support.  The following macros are always defined so that if
+ * libpng interlace handling is turned off the macros may be used to handle
+ * interlaced images within the application.
+ */
+#define PNG_INTERLACE_ADAM7_PASSES 7
+
+/* Two macros to return the first row and first column of the original,
+ * full, image which appears in a given pass.  'pass' is in the range 0
+ * to 6 and the result is in the range 0 to 7.
+ */
+#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7)
+#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7)
+
+/* A macro to return the offset between pixels in the output row for a pair of
+ * pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that
+ * follows.  Note that ROW_OFFSET is the offset from one row to the next whereas
+ * COL_OFFSET is from one column to the next, within a row.
+ */
+#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8)
+#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1))
+
+/* Two macros to help evaluate the number of rows or columns in each
+ * pass.  This is expressed as a shift - effectively log2 of the number or
+ * rows or columns in each 8x8 tile of the original image.
+ */
+#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3)
+#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3)
+
+/* Hence two macros to determine the number of rows or columns in a given
+ * pass of an image given its height or width.  In fact these macros may
+ * return non-zero even though the sub-image is empty, because the other
+ * dimension may be empty for a small image.
+ */
+#define PNG_PASS_ROWS(height, pass) (((height)+(((1<<PNG_PASS_ROW_SHIFT(pass))\
+   -1)-PNG_PASS_START_ROW(pass)))>>PNG_PASS_ROW_SHIFT(pass))
+#define PNG_PASS_COLS(width, pass) (((width)+(((1<<PNG_PASS_COL_SHIFT(pass))\
+   -1)-PNG_PASS_START_COL(pass)))>>PNG_PASS_COL_SHIFT(pass))
+
+/* For the reader row callbacks (both progressive and sequential) it is
+ * necessary to find the row in the output image given a row in an interlaced
+ * image, so two more macros:
+ */
+#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \
+   (((yIn)<<PNG_PASS_ROW_SHIFT(pass))+PNG_PASS_START_ROW(pass))
+#define PNG_COL_FROM_PASS_COL(xIn, pass) \
+   (((xIn)<<PNG_PASS_COL_SHIFT(pass))+PNG_PASS_START_COL(pass))
+
+/* Two macros which return a boolean (0 or 1) saying whether the given row
+ * or column is in a particular pass.  These use a common utility macro that
+ * returns a mask for a given pass - the offset 'off' selects the row or
+ * column version.  The mask has the appropriate bit set for each column in
+ * the tile.
+ */
+#define PNG_PASS_MASK(pass,off) ( \
+   ((0x110145AF>>(((7-(off))-(pass))<<2)) & 0xF) | \
+   ((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0))
+
+#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \
+   ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1)
+#define PNG_COL_IN_INTERLACE_PASS(x, pass) \
+   ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1)
+
+#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED
+/* With these routines we avoid an integer divide, which will be slower on
+ * most machines.  However, it does take more operations than the corresponding
+ * divide method, so it may be slower on a few RISC systems.  There are two
+ * shifts (by 8 or 16 bits) and an addition, versus a single integer divide.
+ *
+ * Note that the rounding factors are NOT supposed to be the same!  128 and
+ * 32768 are correct for the NODIV code; 127 and 32767 are correct for the
+ * standard method.
+ *
+ * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ]
+ */
+
+ /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */
+
+#  define png_composite(composite, fg, alpha, bg)         \
+     { png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \
+           * (png_uint_16)(alpha)                         \
+           + (png_uint_16)(bg)*(png_uint_16)(255          \
+           - (png_uint_16)(alpha)) + 128);                \
+       (composite) = (png_byte)((temp + (temp >> 8)) >> 8); }
+
+#  define png_composite_16(composite, fg, alpha, bg)       \
+     { png_uint_32 temp = (png_uint_32)((png_uint_32)(fg)  \
+           * (png_uint_32)(alpha)                          \
+           + (png_uint_32)(bg)*(65535                      \
+           - (png_uint_32)(alpha)) + 32768);               \
+       (composite) = (png_uint_16)((temp + (temp >> 16)) >> 16); }
+
+#else  /* Standard method using integer division */
+
+#  define png_composite(composite, fg, alpha, bg)                          \
+     (composite) = (png_byte)(((png_uint_16)(fg) * (png_uint_16)(alpha) +  \
+     (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) +       \
+     127) / 255)
+
+#  define png_composite_16(composite, fg, alpha, bg)                         \
+     (composite) = (png_uint_16)(((png_uint_32)(fg) * (png_uint_32)(alpha) + \
+     (png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) +         \
+     32767) / 65535)
+#endif /* PNG_READ_COMPOSITE_NODIV_SUPPORTED */
+
+#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED
+PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf));
+PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf));
+PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf));
+#endif
+
+PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_structp png_ptr,
+    png_const_bytep buf));
+/* No png_get_int_16 -- may be added if there's a real need for it. */
+
+/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */
+#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED
+PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i));
+#endif
+#ifdef PNG_SAVE_INT_32_SUPPORTED
+PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i));
+#endif
+
+/* Place a 16-bit number into a buffer in PNG byte order.
+ * The parameter is declared unsigned int, not png_uint_16,
+ * just to avoid potential problems on pre-ANSI C compilers.
+ */
+#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED
+PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i));
+/* No png_save_int_16 -- may be added if there's a real need for it. */
+#endif
+
+#ifdef PNG_USE_READ_MACROS
+/* Inline macros to do direct reads of bytes from the input buffer.
+ * The png_get_int_32() routine assumes we are using two's complement
+ * format for negative values, which is almost certainly true.
+ */
+#  define png_get_uint_32(buf) \
+     (((png_uint_32)(*(buf)) << 24) + \
+      ((png_uint_32)(*((buf) + 1)) << 16) + \
+      ((png_uint_32)(*((buf) + 2)) << 8) + \
+      ((png_uint_32)(*((buf) + 3))))
+
+   /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the
+    * function) incorrectly returned a value of type png_uint_32.
+    */
+#  define png_get_uint_16(buf) \
+     ((png_uint_16) \
+      (((unsigned int)(*(buf)) << 8) + \
+       ((unsigned int)(*((buf) + 1)))))
+
+#  define png_get_int_32(buf) \
+     ((png_int_32)((*(buf) & 0x80) \
+      ? -((png_int_32)((png_get_uint_32(buf) ^ 0xffffffffL) + 1)) \
+      : (png_int_32)png_get_uint_32(buf)))
+#endif
+
+#if defined(PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED) || \
+    defined(PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED)
+PNG_EXPORT(234, void, png_set_check_for_invalid_index, (png_structp png_ptr,
+    int allowed));
+#endif
+
+/* Maintainer: Put new public prototypes here ^, in libpng.3, and project
+ * defs
+ */
+
+/* The last ordinal number (this is the *last* one already used; the next
+ * one to use is one more than this.)  Maintainer, remember to add an entry to
+ * scripts/symbols.def as well.
+ */
+#ifdef PNG_EXPORT_LAST_ORDINAL
+  PNG_EXPORT_LAST_ORDINAL(234);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PNG_VERSION_INFO_ONLY */
+/* Do not put anything past this line */
+#endif /* PNG_H */
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/misc/winutils/include/pngconf.h	Wed Oct 24 13:21:18 2012 +0100
@@ -0,0 +1,598 @@
+
+/* pngconf.h - machine configurable file for libpng
+ *
+ * libpng version 1.5.13 - September 27, 2012
+ *
+ * Copyright (c) 1998-2012 Glenn Randers-Pehrson
+ * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
+ * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
+ *
+ * This code is released under the libpng license.
+ * For conditions of distribution and use, see the disclaimer
+ * and license in png.h
+ *
+ */
+
+/* Any machine specific code is near the front of this file, so if you
+ * are configuring libpng for a machine, you may want to read the section
+ * starting here down to where it starts to typedef png_color, png_text,
+ * and png_info.
+ */
+
+#ifndef PNGCONF_H
+#define PNGCONF_H
+
+#ifndef PNG_BUILDING_SYMBOL_TABLE
+/* PNG_NO_LIMITS_H may be used to turn off the use of the standard C
+ * definition file for  machine specific limits, this may impact the
+ * correctness of the definitions below (see uses of INT_MAX).
+ */
+#  ifndef PNG_NO_LIMITS_H
+#    include <limits.h>
+#  endif
+
+/* For the memory copy APIs (i.e. the standard definitions of these),
+ * because this file defines png_memcpy and so on the base APIs must
+ * be defined here.
+ */
+#  ifdef BSD
+#    include <strings.h>
+#  else
+#    include <string.h>
+#  endif
+
+/* For png_FILE_p - this provides the standard definition of a
+ * FILE
+ */
+#  ifdef PNG_STDIO_SUPPORTED
+#    include <stdio.h>
+#  endif
+#endif
+
+/* This controls optimization of the reading of 16 and 32 bit values
+ * from PNG files.  It can be set on a per-app-file basis - it
+ * just changes whether a macro is used when the function is called.
+ * The library builder sets the default; if read functions are not
+ * built into the library the macro implementation is forced on.
+ */
+#ifndef PNG_READ_INT_FUNCTIONS_SUPPORTED
+#  define PNG_USE_READ_MACROS
+#endif
+#if !defined(PNG_NO_USE_READ_MACROS) && !defined(PNG_USE_READ_MACROS)
+#  if PNG_DEFAULT_READ_MACROS
+#    define PNG_USE_READ_MACROS
+#  endif
+#endif
+
+/* COMPILER SPECIFIC OPTIONS.
+ *
+ * These options are provided so that a variety of difficult compilers
+ * can be used.  Some are fixed at build time (e.g. PNG_API_RULE
+ * below) but still have compiler specific implementations, others
+ * may be changed on a per-file basis when compiling against libpng.
+ */
+
+/* The PNGARG macro protects us against machines that don't have function
+ * prototypes (ie K&R style headers).  If your compiler does not handle
+ * function prototypes, define this macro and use the included ansi2knr.
+ * I've always been able to use _NO_PROTO as the indicator, but you may
+ * need to drag the empty declaration out in front of here, or change the
+ * ifdef to suit your own needs.
+ */
+#ifndef PNGARG
+
+#  ifdef OF /* zlib prototype munger */
+#    define PNGARG(arglist) OF(arglist)
+#  else
+
+#    ifdef _NO_PROTO
+#      define PNGARG(arglist) ()
+#    else
+#      define PNGARG(arglist) arglist
+#    endif /* _NO_PROTO */
+
+#  endif /* OF */
+
+#endif /* PNGARG */
+
+/* Function calling conventions.
+ * =============================
+ * Normally it is not necessary to specify to the compiler how to call
+ * a function - it just does it - however on x86 systems derived from
+ * Microsoft and Borland C compilers ('IBM PC', 'DOS', 'Windows' systems
+ * and some others) there are multiple ways to call a function and the
+ * default can be changed on the compiler command line.  For this reason
+ * libpng specifies the calling convention of every exported function and
+ * every function called via a user supplied function pointer.  This is
+ * done in this file by defining the following macros:
+ *
+ * PNGAPI    Calling convention for exported functions.
+ * PNGCBAPI  Calling convention for user provided (callback) functions.
+ * PNGCAPI   Calling convention used by the ANSI-C library (required
+ *           for longjmp callbacks and sometimes used internally to
+ *           specify the calling convention for zlib).
+ *
+ * These macros should never be overridden.  If it is necessary to
+ * change calling convention in a private build this can be done
+ * by setting PNG_API_RULE (which defaults to 0) to one of the values
+ * below to select the correct 'API' variants.
+ *
+ * PNG_API_RULE=0 Use PNGCAPI - the 'C' calling convention - throughout.
+ *                This is correct in every known environment.
+ * PNG_API_RULE=1 Use the operating system convention for PNGAPI and
+ *                the 'C' calling convention (from PNGCAPI) for
+ *                callbacks (PNGCBAPI).  This is no longer required
+ *                in any known environment - if it has to be used
+ *                please post an explanation of the problem to the
+ *                libpng mailing list.
+ *
+ * These cases only differ if the operating system does not use the C
+ * calling convention, at present this just means the above cases
+ * (x86 DOS/Windows sytems) and, even then, this does not apply to
+ * Cygwin running on those systems.
+ *
+ * Note that the value must be defined in pnglibconf.h so that what
+ * the application uses to call the library matches the conventions
+ * set when building the library.
+ */
+
+/* Symbol export
+ * =============
+ * When building a shared library it is almost always necessary to tell
+ * the compiler which symbols to export.  The png.h macro 'PNG_EXPORT'
+ * is used to mark the symbols.  On some systems these symbols can be
+ * extracted at link time and need no special processing by the compiler,
+ * on other systems the symbols are flagged by the compiler and just
+ * the declaration requires a special tag applied (unfortunately) in a
+ * compiler dependent way.  Some systems can do either.
+ *
+ * A small number of older systems also require a symbol from a DLL to
+ * be flagged to the program that calls it.  This is a problem because
+ * we do not know in the header file included by application code that
+ * the symbol will come from a shared library, as opposed to a statically
+ * linked one.  For this reason the application must tell us by setting
+ * the magic flag PNG_USE_DLL to turn on the special processing before
+ * it includes png.h.
+ *
+ * Four additional macros are used to make this happen:
+ *
+ * PNG_IMPEXP The magic (if any) to cause a symbol to be exported from
+ *            the build or imported if PNG_USE_DLL is set - compiler
+ *            and system specific.
+ *
+ * PNG_EXPORT_TYPE(type) A macro that pre or appends PNG_IMPEXP to
+ *                       'type', compiler specific.
+ *
+ * PNG_DLL_EXPORT Set to the magic to use during a libpng build to
+ *                make a symbol exported from the DLL.  Not used in the
+ *                public header files; see pngpriv.h for how it is used
+ *                in the libpng build.
+ *
+ * PNG_DLL_IMPORT Set to the magic to force the libpng symbols to come
+ *                from a DLL - used to define PNG_IMPEXP when
+ *                PNG_USE_DLL is set.
+ */
+
+/* System specific discovery.
+ * ==========================
+ * This code is used at build time to find PNG_IMPEXP, the API settings
+ * and PNG_EXPORT_TYPE(), it may also set a macro to indicate the DLL
+ * import processing is possible.  On Windows/x86 systems it also sets
+ * compiler-specific macros to the values required to change the calling
+ * conventions of the various functions.
+ */
+#if ( defined(_Windows) || defined(_WINDOWS) || defined(WIN32) ||\
+      defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) ) &&\
+    ( defined(_X86_) || defined(_X64_) || defined(_M_IX86) ||\
+      defined(_M_X64) || defined(_M_IA64) )
+  /* Windows system (DOS doesn't support DLLs) running on x86/x64.  Includes
+   * builds under Cygwin or MinGW.  Also includes Watcom builds but these need
+   * special treatment because they are not compatible with GCC or Visual C
+   * because of different calling conventions.
+   */
+#  if PNG_API_RULE == 2
+    /* If this line results in an error, either because __watcall is not
+     * understood or because of a redefine just below you cannot use *this*
+     * build of the library with the compiler you are using.  *This* build was
+     * build using Watcom and applications must also be built using Watcom!
+     */
+#    define PNGCAPI __watcall
+#  endif
+
+#  if defined(__GNUC__) || (defined (_MSC_VER) && (_MSC_VER >= 800))
+#    define PNGCAPI __cdecl
+#    if PNG_API_RULE == 1
+#      define PNGAPI __stdcall
+#    endif
+#  else
+    /* An older compiler, or one not detected (erroneously) above,
+     * if necessary override on the command line to get the correct
+     * variants for the compiler.
+     */
+#    ifndef PNGCAPI
+#      define PNGCAPI _cdecl
+#    endif
+#    if PNG_API_RULE == 1 && !defined(PNGAPI)
+#      define PNGAPI _stdcall
+#    endif
+#  endif /* compiler/api */
+  /* NOTE: PNGCBAPI always defaults to PNGCAPI. */
+
+#  if defined(PNGAPI) && !defined(PNG_USER_PRIVATEBUILD)
+   ERROR: PNG_USER_PRIVATEBUILD must be defined if PNGAPI is changed
+#  endif
+
+#  if (defined(_MSC_VER) && _MSC_VER < 800) ||\
+      (defined(__BORLANDC__) && __BORLANDC__ < 0x500)
+    /* older Borland and MSC
+     * compilers used '__export' and required this to be after
+     * the type.
+     */
+#    ifndef PNG_EXPORT_TYPE
+#      define PNG_EXPORT_TYPE(type) type PNG_IMPEXP
+#    endif
+#    define PNG_DLL_EXPORT __export
+#  else /* newer compiler */
+#    define PNG_DLL_EXPORT __declspec(dllexport)
+#    ifndef PNG_DLL_IMPORT
+#      define PNG_DLL_IMPORT __declspec(dllimport)
+#    endif
+#  endif /* compiler */
+
+#else /* !Windows/x86 */
+#  if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__)
+#    define PNGAPI _System
+#  else /* !Windows/x86 && !OS/2 */
+    /* Use the defaults, or define PNG*API on the command line (but
+     * this will have to be done for every compile!)
+     */
+#  endif /* other system, !OS/2 */
+#endif /* !Windows/x86 */
+
+/* Now do all the defaulting . */
+#ifndef PNGCAPI
+#  define PNGCAPI
+#endif
+#ifndef PNGCBAPI
+#  define PNGCBAPI PNGCAPI
+#endif
+#ifndef PNGAPI
+#  define PNGAPI PNGCAPI
+#endif
+
+/* PNG_IMPEXP may be set on the compilation system command line or (if not set)
+ * then in an internal header file when building the library, otherwise (when
+ * using the library) it is set here.
+ */
+#ifndef PNG_IMPEXP
+#  if defined(PNG_USE_DLL) && defined(PNG_DLL_IMPORT)
+     /* This forces use of a DLL, disallowing static linking */
+#    define PNG_IMPEXP PNG_DLL_IMPORT
+#  endif
+
+#  ifndef PNG_IMPEXP
+#    define PNG_IMPEXP
+#  endif
+#endif
+
+/* In 1.5.2 the definition of PNG_FUNCTION has been changed to always treat
+ * 'attributes' as a storage class - the attributes go at the start of the
+ * function definition, and attributes are always appended regardless of the
+ * compiler.  This considerably simplifies these macros but may cause problems
+ * if any compilers both need function attributes and fail to handle them as
+ * a storage class (this is unlikely.)
+ */
+#ifndef PNG_FUNCTION
+#  define PNG_FUNCTION(type, name, args, attributes) attributes type name args
+#endif
+
+#ifndef PNG_EXPORT_TYPE
+#  define PNG_EXPORT_TYPE(type) PNG_IMPEXP type
+#endif
+
+   /* The ordinal value is only relevant when preprocessing png.h for symbol
+    * table entries, so we discard it here.  See the .dfn files in the
+    * scripts directory.
+    */
+#ifndef PNG_EXPORTA
+
+#  define PNG_EXPORTA(ordinal, type, name, args, attributes)\
+      PNG_FUNCTION(PNG_EXPORT_TYPE(type),(PNGAPI name),PNGARG(args), \
+        extern attributes)
+#endif
+
+/* ANSI-C (C90) does not permit a macro to be invoked with an empty argument,
+ * so make something non-empty to satisfy the requirement:
+ */
+#define PNG_EMPTY /*empty list*/
+
+#define PNG_EXPORT(ordinal, type, name, args)\
+   PNG_EXPORTA(ordinal, type, name, args, PNG_EMPTY)
+
+/* Use PNG_REMOVED to comment out a removed interface. */
+#ifndef PNG_REMOVED
+#  define PNG_REMOVED(ordinal, type, name, args, attributes)
+#endif
+
+#ifndef PNG_CALLBACK
+#  define PNG_CALLBACK(type, name, args) type (PNGCBAPI name) PNGARG(args)
+#endif
+
+/* Support for compiler specific function attributes.  These are used
+ * so that where compiler support is available incorrect use of API
+ * functions in png.h will generate compiler warnings.
+ *
+ * Added at libpng-1.2.41.
+ */
+
+#ifndef PNG_NO_PEDANTIC_WARNINGS
+#  ifndef PNG_PEDANTIC_WARNINGS_SUPPORTED
+#    define PNG_PEDANTIC_WARNINGS_SUPPORTED
+#  endif
+#endif
+
+#ifdef PNG_PEDANTIC_WARNINGS_SUPPORTED
+  /* Support for compiler specific function attributes.  These are used
+   * so that where compiler support is available incorrect use of API
+   * functions in png.h will generate compiler warnings.  Added at libpng
+   * version 1.2.41.
+   */
+#  if defined(__GNUC__)
+#    ifndef PNG_USE_RESULT
+#      define PNG_USE_RESULT __attribute__((__warn_unused_result__))
+#    endif
+#    ifndef PNG_NORETURN
+#      define PNG_NORETURN   __attribute__((__noreturn__))
+#    endif
+#    if __GNUC__ >= 3
+#      ifndef PNG_ALLOCATED
+#        define PNG_ALLOCATED  __attribute__((__malloc__))
+#      endif
+#      ifndef PNG_DEPRECATED
+#        define PNG_DEPRECATED __attribute__((__deprecated__))
+#      endif
+#      ifndef PNG_PRIVATE
+#        if 0 /* Doesn't work so we use deprecated instead*/
+#          define PNG_PRIVATE \
+            __attribute__((warning("This function is not exported by libpng.")))
+#        else
+#          define PNG_PRIVATE \
+            __attribute__((__deprecated__))
+#        endif
+#      endif
+#    endif /*  __GNUC__ >= 3 */
+#  endif /* __GNUC__ */
+
+#  if defined(_MSC_VER)  && (_MSC_VER >= 1300)
+#    ifndef PNG_USE_RESULT
+#      define PNG_USE_RESULT /* not supported */
+#    endif
+#    ifndef PNG_NORETURN
+#      define PNG_NORETURN __declspec(noreturn)
+#    endif
+#    ifndef PNG_ALLOCATED
+#      if (_MSC_VER >= 1400)
+#        define PNG_ALLOCATED __declspec(restrict)
+#      endif
+#    endif
+#    ifndef PNG_DEPRECATED
+#      define PNG_DEPRECATED __declspec(deprecated)
+#    endif
+#    ifndef PNG_PRIVATE
+#      define PNG_PRIVATE __declspec(deprecated)
+#    endif
+#  endif /* _MSC_VER */
+#endif /* PNG_PEDANTIC_WARNINGS */
+
+#ifndef PNG_DEPRECATED
+#  define PNG_DEPRECATED  /* Use of this function is deprecated */
+#endif
+#ifndef PNG_USE_RESULT
+#  define PNG_USE_RESULT  /* The result of this function must be checked */
+#endif
+#ifndef PNG_NORETURN
+#  define PNG_NORETURN    /* This function does not return */
+#endif
+#ifndef PNG_ALLOCATED
+#  define PNG_ALLOCATED   /* The result of the function is new memory */
+#endif
+#ifndef PNG_PRIVATE
+#  define PNG_PRIVATE     /* This is a private libpng function */
+#endif
+#ifndef PNG_FP_EXPORT     /* A floating point API. */
+#  ifdef PNG_FLOATING_POINT_SUPPORTED
+#     define PNG_FP_EXPORT(ordinal, type, name, args)\
+         PNG_EXPORT(ordinal, type, name, args);
+#  else                   /* No floating point APIs */
+#     define PNG_FP_EXPORT(ordinal, type, name, args)
+#  endif
+#endif
+#ifndef PNG_FIXED_EXPORT  /* A fixed point API. */
+#  ifdef PNG_FIXED_POINT_SUPPORTED
+#     define PNG_FIXED_EXPORT(ordinal, type, name, args)\
+         PNG_EXPORT(ordinal, type, name, args);
+#  else                   /* No fixed point APIs */
+#     define PNG_FIXED_EXPORT(ordinal, type, name, args)
+#  endif
+#endif
+
+/* The following uses const char * instead of char * for error
+ * and warning message functions, so some compilers won't complain.
+ * If you do not want to use const, define PNG_NO_CONST here.
+ *
+ * This should not change how the APIs are called, so it can be done
+ * on a per-file basis in the application.
+ */
+#ifndef PNG_CONST
+#  ifndef PNG_NO_CONST
+#    define PNG_CONST const
+#  else
+#    define PNG_CONST
+#  endif
+#endif
+
+/* Some typedefs to get us started.  These should be safe on most of the
+ * common platforms.  The typedefs should be at least as large as the
+ * numbers suggest (a png_uint_32 must be at least 32 bits long), but they
+ * don't have to be exactly that size.  Some compilers dislike passing
+ * unsigned shorts as function parameters, so you may be better off using
+ * unsigned int for png_uint_16.
+ */
+
+#if defined(INT_MAX) && (INT_MAX > 0x7ffffffeL)
+typedef unsigned int png_uint_32;
+typedef int png_int_32;
+#else
+typedef unsigned long png_uint_32;
+typedef long png_int_32;
+#endif
+typedef unsigned short png_uint_16;
+typedef short png_int_16;
+typedef unsigned char png_byte;
+
+#ifdef PNG_NO_SIZE_T
+typedef unsigned int png_size_t;
+#else
+typedef size_t png_size_t;
+#endif
+#define png_sizeof(x) (sizeof (x))
+
+/* The following is needed for medium model support.  It cannot be in the
+ * pngpriv.h header.  Needs modification for other compilers besides
+ * MSC.  Model independent support declares all arrays and pointers to be
+ * large using the far keyword.  The zlib version used must also support
+ * model independent data.  As of version zlib 1.0.4, the necessary changes
+ * have been made in zlib.  The USE_FAR_KEYWORD define triggers other
+ * changes that are needed. (Tim Wegner)
+ */
+
+/* Separate compiler dependencies (problem here is that zlib.h always
+ * defines FAR. (SJT)
+ */
+#ifdef __BORLANDC__
+#  if defined(__LARGE__) || defined(__HUGE__) || defined(__COMPACT__)
+#    define LDATA 1
+#  else
+#    define LDATA 0
+#  endif
+  /* GRR:  why is Cygwin in here?  Cygwin is not Borland C... */
+#  if !defined(__WIN32__) && !defined(__FLAT__) && !defined(__CYGWIN__)
+#    define PNG_MAX_MALLOC_64K /* only used in build */
+#    if (LDATA != 1)
+#      ifndef FAR
+#        define FAR __far
+#      endif
+#      define USE_FAR_KEYWORD
+#    endif   /* LDATA != 1 */
+         /* Possibly useful for moving data out of default segment.
+          * Uncomment it if you want. Could also define FARDATA as
+          * const if your compiler supports it. (SJT)
+#        define FARDATA FAR
+          */
+#  endif  /* __WIN32__, __FLAT__, __CYGWIN__ */
+#endif   /* __BORLANDC__ */
+
+
+/* Suggest testing for specific compiler first before testing for
+ * FAR.  The Watcom compiler defines both __MEDIUM__ and M_I86MM,
+ * making reliance oncertain keywords suspect. (SJT)
+ */
+
+/* MSC Medium model */
+#ifdef FAR
+#  ifdef M_I86MM
+#    define USE_FAR_KEYWORD
+#    define FARDATA FAR
+#    include <dos.h>
+#  endif
+#endif
+
+/* SJT: default case */
+#ifndef FAR
+#  define FAR
+#endif
+
+/* At this point FAR is always defined */
+#ifndef FARDATA
+#  define FARDATA
+#endif
+
+/* Typedef for floating-point numbers that are converted
+ * to fixed-point with a multiple of 100,000, e.g., gamma
+ */
+typedef png_int_32 png_fixed_point;
+
+/* Add typedefs for pointers */
+typedef void                      FAR * png_voidp;
+typedef PNG_CONST void            FAR * png_const_voidp;
+typedef png_byte                  FAR * png_bytep;
+typedef PNG_CONST png_byte        FAR * png_const_bytep;
+typedef png_uint_32               FAR * png_uint_32p;
+typedef PNG_CONST png_uint_32     FAR * png_const_uint_32p;
+typedef png_int_32                FAR * png_int_32p;
+typedef PNG_CONST png_int_32      FAR * png_const_int_32p;
+typedef png_uint_16               FAR * png_uint_16p;
+typedef PNG_CONST png_uint_16     FAR * png_const_uint_16p;
+typedef png_int_16                FAR * png_int_16p;
+typedef PNG_CONST png_int_16      FAR * png_const_int_16p;
+typedef char                      FAR * png_charp;
+typedef PNG_CONST char            FAR * png_const_charp;
+typedef png_fixed_point           FAR * png_fixed_point_p;
+typedef PNG_CONST png_fixed_point FAR * png_const_fixed_point_p;
+typedef png_size_t                FAR * png_size_tp;
+typedef PNG_CONST png_size_t      FAR * png_const_size_tp;
+
+#ifdef PNG_STDIO_SUPPORTED
+typedef FILE            * png_FILE_p;
+#endif
+
+#ifdef PNG_FLOATING_POINT_SUPPORTED
+typedef double           FAR * png_doublep;
+typedef PNG_CONST double FAR * png_const_doublep;
+#endif
+
+/* Pointers to pointers; i.e. arrays */
+typedef png_byte        FAR * FAR * png_bytepp;
+typedef png_uint_32     FAR * FAR * png_uint_32pp;
+typedef png_int_32      FAR * FAR * png_int_32pp;
+typedef png_uint_16     FAR * FAR * png_uint_16pp;
+typedef png_int_16      FAR * FAR * png_int_16pp;
+typedef PNG_CONST char  FAR * FAR * png_const_charpp;
+typedef char            FAR * FAR * png_charpp;
+typedef png_fixed_point FAR * FAR * png_fixed_point_pp;
+#ifdef PNG_FLOATING_POINT_SUPPORTED
+typedef double          FAR * FAR * png_doublepp;
+#endif
+
+/* Pointers to pointers to pointers; i.e., pointer to array */
+typedef char            FAR * FAR * FAR * png_charppp;
+
+/* png_alloc_size_t is guaranteed to be no smaller than png_size_t,
+ * and no smaller than png_uint_32.  Casts from png_size_t or png_uint_32
+ * to png_alloc_size_t are not necessary; in fact, it is recommended
+ * not to use them at all so that the compiler can complain when something
+ * turns out to be problematic.
+ * Casts in the other direction (from png_alloc_size_t to png_size_t or
+ * png_uint_32) should be explicitly applied; however, we do not expect
+ * to encounter practical situations that require such conversions.
+ */
+#if defined(__TURBOC__) && !defined(__FLAT__)
+   typedef unsigned long png_alloc_size_t;
+#else
+#  if defined(_MSC_VER) && defined(MAXSEG_64K)
+     typedef unsigned long    png_alloc_size_t;
+#  else
+     /* This is an attempt to detect an old Windows system where (int) is
+      * actually 16 bits, in that case png_malloc must have an argument with a
+      * bigger size to accomodate the requirements of the library.
+      */
+#    if (defined(_Windows) || defined(_WINDOWS) || defined(_WINDOWS_)) && \
+        (!defined(INT_MAX) || INT_MAX <= 0x7ffffffeL)
+       typedef DWORD         png_alloc_size_t;
+#    else
+       typedef png_size_t    png_alloc_size_t;
+#    endif
+#  endif
+#endif
+
+#endif /* PNGCONF_H */
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/misc/winutils/include/zconf.h	Wed Oct 24 13:21:18 2012 +0100
@@ -0,0 +1,428 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+
+/* all linked symbols */
+#  define _dist_code            z__dist_code
+#  define _length_code          z__length_code
+#  define _tr_align             z__tr_align
+#  define _tr_flush_block       z__tr_flush_block
+#  define _tr_init              z__tr_init
+#  define _tr_stored_block      z__tr_stored_block
+#  define _tr_tally             z__tr_tally
+#  define adler32               z_adler32
+#  define adler32_combine       z_adler32_combine
+#  define adler32_combine64     z_adler32_combine64
+#  define compress              z_compress
+#  define compress2             z_compress2
+#  define compressBound         z_compressBound
+#  define crc32                 z_crc32
+#  define crc32_combine         z_crc32_combine
+#  define crc32_combine64       z_crc32_combine64
+#  define deflate               z_deflate
+#  define deflateBound          z_deflateBound
+#  define deflateCopy           z_deflateCopy
+#  define deflateEnd            z_deflateEnd
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateInit_          z_deflateInit_
+#  define deflateParams         z_deflateParams
+#  define deflatePrime          z_deflatePrime
+#  define deflateReset          z_deflateReset
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateSetHeader      z_deflateSetHeader
+#  define deflateTune           z_deflateTune
+#  define deflate_copyright     z_deflate_copyright
+#  define get_crc_table         z_get_crc_table
+#  define gz_error              z_gz_error
+#  define gz_intmax             z_gz_intmax
+#  define gz_strwinerror        z_gz_strwinerror
+#  define gzbuffer              z_gzbuffer
+#  define gzclearerr            z_gzclearerr
+#  define gzclose               z_gzclose
+#  define gzclose_r             z_gzclose_r
+#  define gzclose_w             z_gzclose_w
+#  define gzdirect              z_gzdirect
+#  define gzdopen               z_gzdopen
+#  define gzeof                 z_gzeof
+#  define gzerror               z_gzerror
+#  define gzflush               z_gzflush
+#  define gzgetc                z_gzgetc
+#  define gzgets                z_gzgets
+#  define gzoffset              z_gzoffset
+#  define gzoffset64            z_gzoffset64
+#  define gzopen                z_gzopen
+#  define gzopen64              z_gzopen64
+#  define gzprintf              z_gzprintf
+#  define gzputc                z_gzputc
+#  define gzputs                z_gzputs
+#  define gzread                z_gzread
+#  define gzrewind              z_gzrewind
+#  define gzseek                z_gzseek
+#  define gzseek64              z_gzseek64
+#  define gzsetparams           z_gzsetparams
+#  define gztell                z_gztell
+#  define gztell64              z_gztell64
+#  define gzungetc              z_gzungetc
+#  define gzwrite               z_gzwrite
+#  define inflate               z_inflate
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCopy           z_inflateCopy
+#  define inflateEnd            z_inflateEnd
+#  define inflateGetHeader      z_inflateGetHeader
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
+#  define inflatePrime          z_inflatePrime
+#  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateUndermine      z_inflateUndermine
+#  define inflate_copyright     z_inflate_copyright
+#  define inflate_fast          z_inflate_fast
+#  define inflate_table         z_inflate_table
+#  define uncompress            z_uncompress
+#  define zError                z_zError
+#  define zcalloc               z_zcalloc
+#  define zcfree                z_zcfree
+#  define zlibCompileFlags      z_zlibCompileFlags
+#  define zlibVersion           z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+#  define Byte                  z_Byte
+#  define Bytef                 z_Bytef
+#  define alloc_func            z_alloc_func
+#  define charf                 z_charf
+#  define free_func             z_free_func
+#  define gzFile                z_gzFile
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
+#  define in_func               z_in_func
+#  define intf                  z_intf
+#  define out_func              z_out_func
+#  define uInt                  z_uInt
+#  define uIntf                 z_uIntf
+#  define uLong                 z_uLong
+#  define uLongf                z_uLongf
+#  define voidp                 z_voidp
+#  define voidpc                z_voidpc
+#  define voidpf                z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+#  define gz_header_s           z_gz_header_s
+#  define internal_state        z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+#  define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef STDC
+#  include <sys/types.h>    /* for off_t */
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#  include <unistd.h>       /* for SEEK_* and off_t */
+#  ifdef VMS
+#    include <unixio.h>     /* for off_t */
+#  endif
+#  ifndef z_off_t
+#    define z_off_t off_t
+#  endif
+#endif
+
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define z_off64_t off64_t
+#else
+#  define z_off64_t z_off_t
+#endif
+
+#if defined(__OS400__)
+#  define NO_vsnprintf
+#endif
+
+#if defined(__MVS__)
+#  define NO_vsnprintf
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+  #pragma map(deflateInit_,"DEIN")
+  #pragma map(deflateInit2_,"DEIN2")
+  #pragma map(deflateEnd,"DEEND")
+  #pragma map(deflateBound,"DEBND")
+  #pragma map(inflateInit_,"ININ")
+  #pragma map(inflateInit2_,"ININ2")
+  #pragma map(inflateEnd,"INEND")
+  #pragma map(inflateSync,"INSY")
+  #pragma map(inflateSetDictionary,"INSEDI")
+  #pragma map(compressBound,"CMBND")
+  #pragma map(inflate_table,"INTABL")
+  #pragma map(inflate_fast,"INFA")
+  #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/misc/winutils/include/zlib.h	Wed Oct 24 13:21:18 2012 +0100
@@ -0,0 +1,1613 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.2.5, April 19th, 2010
+
+  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
+  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.5"
+#define ZLIB_VERNUM 0x1250
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 5
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+    The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed data.
+  This version of the library supports only one compression method (deflation)
+  but other algorithms will be added later and will have the same stream
+  interface.
+
+    Compression can be done in a single step if the buffers are large enough,
+  or can be done by repeated calls of the compression function.  In the latter
+  case, the application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+    The compressed data format used by default by the in-memory functions is
+  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+  around a deflate stream, which is itself documented in RFC 1951.
+
+    The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio using the functions that start
+  with "gz".  The gzip format is different from the zlib format.  gzip is a
+  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+    This library can optionally read and write gzip streams in memory as well.
+
+    The zlib format was designed to be compact and fast for use in memory
+  and on communications channels.  The gzip format was designed for single-
+  file compression on file systems, has a larger header than zlib to maintain
+  directory information, and uses a different, slower check method than zlib.
+
+    The library does not install any signal handler.  The decoder checks
+  the consistency of the compressed data, so the library should never crash
+  even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    Bytef    *next_in;  /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    char     *msg;      /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: binary or text */
+    uLong   adler;      /* adler32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+     gzip header information passed to and from zlib routines.  See RFC 1952
+  for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+    int     text;       /* true if compressed data believed to be text */
+    uLong   time;       /* modification time */
+    int     xflags;     /* extra flags (not used when writing a gzip file) */
+    int     os;         /* operating system */
+    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
+    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
+    uInt    extra_max;  /* space at extra (only when reading header) */
+    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
+    uInt    name_max;   /* space at name (only when reading header) */
+    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
+    uInt    comm_max;   /* space at comment (only when reading header) */
+    int     hcrc;       /* true if there was or will be a header crc */
+    int     done;       /* true when done reading gzip header (not used
+                           when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+     The application must update next_in and avail_in when avail_in has dropped
+   to zero.  It must update next_out and avail_out when avail_out has dropped
+   to zero.  The application must initialize zalloc, zfree and opaque before
+   calling the init function.  All other fields are set by the compression
+   library and must not be updated by the application.
+
+     The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree.  This can be useful for custom
+   memory management.  The compression library attaches no meaning to the
+   opaque value.
+
+     zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
+     On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this if
+   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
+   returned by zalloc for objects of exactly 65536 bytes *must* have their
+   offset normalized to zero.  The default allocation function provided by this
+   library ensures this (see zutil.c).  To reduce memory requirements and avoid
+   any allocation of 64K objects, at the expense of compression ratio, compile
+   the library with -DMAX_WBITS=14 (see zconf.h).
+
+     The fields total_in and total_out can be used for statistics or progress
+   reports.  After compression, total_in holds the total size of the
+   uncompressed data and may be saved for use in the decompressor (particularly
+   if the decompressor wants to decompress everything in a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+#define Z_BLOCK         5
+#define Z_TREES         6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_RLE                 3
+#define Z_FIXED               4
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_TEXT     1
+#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field (though see inflate()) */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+                        /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is not
+   compatible with the zlib.h header file used by the application.  This check
+   is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+     Initializes the internal stream state for compression.  The fields
+   zalloc, zfree and opaque must be initialized before by the caller.  If
+   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+   allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at all
+   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
+   requests a default compromise between speed and compression (currently
+   equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if level is not a valid compression level, or
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
+   if there is no error message.  deflateInit does not perform any compression:
+   this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows.  deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).  Some
+    output may be provided even if flush is not set.
+
+    Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating avail_in or avail_out accordingly; avail_out should
+  never be zero before the call.  The application can consume the compressed
+  output when it wants, for example when the output buffer is full (avail_out
+  == 0), or after each call of deflate().  If deflate returns Z_OK and with
+  zero avail_out, it must be called again after making room in the output
+  buffer because there might be more output pending.
+
+    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+  decide how much data to accumulate before producing output, in order to
+  maximize compression.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far.  (In
+  particular avail_in is zero after the call if enough output space has been
+  provided before the call.) Flushing may degrade compression for some
+  compression algorithms and so it should be used only when necessary.  This
+  completes the current deflate block and follows it with an empty stored block
+  that is three bits plus filler bits to the next byte, followed by four bytes
+  (00 00 ff ff).
+
+    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+  output buffer, but the output is not aligned to a byte boundary.  All of the
+  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+  This completes the current deflate block and follows it with an empty fixed
+  codes block that is 10 bits long.  This assures that enough bytes are output
+  in order for the decompressor to finish the block before the empty fixed code
+  block.
+
+    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+  seven bits of the current block are held to be written as the next byte after
+  the next deflate block is completed.  In this case, the decompressor may not
+  be provided enough bits at this point in order to complete decompression of
+  the data provided so far to the compressor.  It may need to wait for the next
+  block to be emitted.  This is for advanced applications that need to control
+  the emission of deflate blocks.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
+  compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+  avail_out is greater than six to avoid repeated flush markers due to
+  avail_out == 0 on return.
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there was
+  enough output space; if deflate returns with Z_OK, this function must be
+  called again with Z_FINISH and more output space (updated avail_out) but no
+  more input data, until it returns with Z_STREAM_END or an error.  After
+  deflate has returned Z_STREAM_END, the only possible operations on the stream
+  are deflateReset or deflateEnd.
+
+    Z_FINISH can be used immediately after deflateInit if all the compression
+  is to be done in a single step.  In this case, avail_out must be at least the
+  value returned by deflateBound (see below).  If deflate does not return
+  Z_STREAM_END, then it must be called again as described above.
+
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
+    deflate() may update strm->data_type if it can make a good guess about
+  the input data type (Z_BINARY or Z_TEXT).  In doubt, the data is considered
+  binary.  This field is only for information purposes and does not affect the
+  compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not
+  fatal, and deflate() can be called again with more input and more output
+  space to continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded).  In the error case, msg
+   may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+     Initializes the internal stream state for decompression.  The fields
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller.  If next_in is not Z_NULL and avail_in is large enough (the
+   exact value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+   use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit() does not process any header information -- that is deferred
+   until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+  The detailed semantics are as follows.  inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing will
+    resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there is
+    no more input data or no more space in the output buffer (see below about
+    the flush parameter).
+
+    Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating the next_* and avail_* values accordingly.  The
+  application can consume the uncompressed output when it wants, for example
+  when the output buffer is full (avail_out == 0), or after each call of
+  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
+  called again after making room in the output buffer because there might be
+  more output pending.
+
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer.  Z_BLOCK requests that inflate()
+  stop if and when it gets to the next deflate block boundary.  When decoding
+  the zlib or gzip format, this will cause inflate() to return immediately
+  after the header and before the first block.  When doing a raw inflate,
+  inflate() will go ahead and process the first block, and will return when it
+  gets to the end of that block, or when it runs out of data.
+
+    The Z_BLOCK option assists in appending to or combining deflate streams.
+  Also to assist in this, on return inflate() will set strm->data_type to the
+  number of unused bits in the last byte taken from strm->next_in, plus 64 if
+  inflate() is currently decoding the last block in the deflate stream, plus
+  128 if inflate() returned immediately after decoding an end-of-block code or
+  decoding the complete header up to just before the first byte of the deflate
+  stream.  The end-of-block will not be indicated until all of the uncompressed
+  data from that block has been written to strm->next_out.  The number of
+  unused bits may in general be greater than seven, except when bit 7 of
+  data_type is set, in which case the number of unused bits will be less than
+  eight.  data_type is set as noted here every time inflate() returns for all
+  flush options, and so can be used to determine the amount of currently
+  consumed input in bits.
+
+    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+  end of each deflate block header is reached, before any actual data in that
+  block is decoded.  This allows the caller to determine the length of the
+  deflate block header for later use in random access within a deflate block.
+  256 is added to the value of strm->data_type when inflate() returns
+  immediately after reaching the end of the deflate block header.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error.  However if all decompression is to be performed in a single step (a
+  single call of inflate), the parameter flush should be set to Z_FINISH.  In
+  this case all pending input is processed and all pending output is flushed;
+  avail_out must be large enough to hold all the uncompressed data.  (The size
+  of the uncompressed data may have been saved by the compressor for this
+  purpose.) The next operation on this stream must be inflateEnd to deallocate
+  the decompression state.  The use of Z_FINISH is never required, but can be
+  used to inform inflate that a faster approach may be used for the single
+  inflate() call.
+
+     In this implementation, inflate() always flushes as much output as
+  possible to the output buffer, and always uses the faster approach on the
+  first call.  So the only effect of the flush parameter in this implementation
+  is on the return value of inflate(), as noted below, or when it returns early
+  because Z_BLOCK or Z_TREES is used.
+
+     If a preset dictionary is needed after this call (see inflateSetDictionary
+  below), inflate sets strm->adler to the adler32 checksum of the dictionary
+  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+  strm->adler to the adler32 checksum of all output produced so far (that is,
+  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+  below.  At the end of the stream, inflate() checks that its computed adler32
+  checksum is equal to that saved by the compressor and returns Z_STREAM_END
+  only if the checksum is correct.
+
+    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically, if requested when
+  initializing with inflateInit2().  Any information contained in the gzip
+  header is not retained, so applications that need that information should
+  instead use raw inflate, see inflateInit2() below, or inflateBack() and
+  perform their own processing of the gzip header and trailer.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect check
+  value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
+  Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+  output buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
+  inflate() can be called again with more input and more output space to
+  continue decompressing.  If Z_DATA_ERROR is returned, the application may
+  then call inflateSync() to look for a good compression block if a partial
+  recovery of the data is desired.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent.  In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
+
+     This is another version of deflateInit with more compression options.  The
+   fields next_in, zalloc, zfree and opaque must be initialized before by the
+   caller.
+
+     The method parameter is the compression method.  It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library.  Larger values of this parameter result in better
+   compression at the expense of memory usage.  The default value is 15 if
+   deflateInit is used instead.
+
+     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
+   determines the window size.  deflate() will then generate raw deflate data
+   with no zlib header or trailer, and will not compute an adler32 check value.
+
+     windowBits can also be greater than 15 for optional gzip encoding.  Add
+   16 to windowBits to write a simple gzip header and trailer around the
+   compressed data instead of a zlib wrapper.  The gzip header will have no
+   file name, no extra data, no comment, no modification time (set to zero), no
+   header crc, and the operating system will be set to 255 (unknown).  If a
+   gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state.  memLevel=1 uses minimum memory but is
+   slow and reduces compression ratio; memLevel=9 uses maximum memory for
+   optimal speed.  The default value is 8.  See zconf.h for total memory usage
+   as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm.  Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match), or Z_RLE to limit match distances to one (run-length
+   encoding).  Filtered data consists mostly of small values with a somewhat
+   random distribution.  In this case, the compression algorithm is tuned to
+   compress them better.  The effect of Z_FILTERED is to force more Huffman
+   coding and less string matching; it is somewhat intermediate between
+   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
+   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
+   strategy parameter only affects the compression ratio but not the
+   correctness of the compressed output even if it is not set appropriately.
+   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+   decoder for special applications.
+
+     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
+   set to null if there is no error message.  deflateInit2 does not perform any
+   compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output.  This function must be called
+   immediately after deflateInit, deflateInit2 or deflateReset, before any call
+   of deflate.  The compressor and decompressor must use exactly the same
+   dictionary (see inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary.  Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size
+   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
+   useful should be put at the end of the dictionary, not at the front.  In
+   addition, the current implementation of deflate will use at most the window
+   size minus 262 bytes of the provided dictionary.
+
+     Upon return of this function, strm->adler is set to the adler32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor.  (The adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.) If a raw deflate was requested, then the
+   adler32 value is not computed and strm->adler is not set.
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if the compression method is bsort).  deflateSetDictionary does not
+   perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter.  The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and can
+   consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to deflateEnd followed by deflateInit,
+   but does not free and reallocate all the internal compression state.  The
+   stream will keep the same compression level and any other attributes that
+   may have been set by deflateInit2.
+
+     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+                                      int level,
+                                      int strategy));
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different strategy.
+   If the compression level is changed, the input available so far is
+   compressed with the old level (and may be flushed); the new level will take
+   effect only at the next call of deflate().
+
+     Before the call of deflateParams, the stream state must be set as for
+   a call of deflate(), since the currently available input may have to be
+   compressed and flushed.  In particular, strm->avail_out must be non-zero.
+
+     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
+   strm->avail_out was zero.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+                                    int good_length,
+                                    int max_lazy,
+                                    int nice_length,
+                                    int max_chain));
+/*
+     Fine tune deflate's internal compression parameters.  This should only be
+   used by someone who understands the algorithm used by zlib's deflate for
+   searching for the best matching string, and even then only by the most
+   fanatic optimizer trying to squeeze out the last compressed bit for their
+   specific input data.  Read the deflate.c source code for the meaning of the
+   max_lazy, good_length, nice_length, and max_chain parameters.
+
+     deflateTune() can be called after deflateInit() or deflateInit2(), and
+   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+                                       uLong sourceLen));
+/*
+     deflateBound() returns an upper bound on the compressed size after
+   deflation of sourceLen bytes.  It must be called after deflateInit() or
+   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
+   to allocate an output buffer for deflation in a single pass, and so would be
+   called before deflate().
+*/
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     deflatePrime() inserts bits in the deflate output stream.  The intent
+   is that this function is used to start off the deflate output with the bits
+   leftover from a previous deflate stream when appending to it.  As such, this
+   function can only be used for raw deflate, and must be used before the first
+   deflate() call after a deflateInit2() or deflateReset().  bits must be less
+   than or equal to 16, and that many of the least significant bits of value
+   will be inserted in the output.
+
+     deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     deflateSetHeader() provides gzip header information for when a gzip
+   stream is requested by deflateInit2().  deflateSetHeader() may be called
+   after deflateInit2() or deflateReset() and before the first call of
+   deflate().  The text, time, os, extra field, name, and comment information
+   in the provided gz_header structure are written to the gzip header (xflag is
+   ignored -- the extra flags are set according to the compression level).  The
+   caller must assure that, if not Z_NULL, name and comment are terminated with
+   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+   available there.  If hcrc is true, a gzip header crc is included.  Note that
+   the current versions of the command-line version of gzip (up through version
+   1.3.x) do not support header crc's, and will report that it is a "multi-part
+   gzip file" and give up.
+
+     If deflateSetHeader is not used, the default gzip header has text false,
+   the time set to zero, and os set to 255, with no extra, name, or comment
+   fields.  The gzip header is returned to the default state by deflateReset().
+
+     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
+
+     This is another version of inflateInit with an extra parameter.  The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library.  The default value is 15 if inflateInit is used
+   instead.  windowBits must be greater than or equal to the windowBits value
+   provided to deflateInit2() while compressing, or it must be equal to 15 if
+   deflateInit2() was not used.  If a compressed stream with a larger window
+   size is given as input, inflate() will return with the error code
+   Z_DATA_ERROR instead of trying to allocate a larger window.
+
+     windowBits can also be zero to request that inflate use the window size in
+   the zlib header of the compressed stream.
+
+     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
+   determines the window size.  inflate() will then process raw deflate data,
+   not looking for a zlib or gzip header, not generating a check value, and not
+   looking for any check values for comparison at the end of the stream.  This
+   is for use with other formats that use the deflate compressed data format
+   such as zip.  Those formats provide their own check values.  If a custom
+   format is developed using the raw deflate format for compressed data, it is
+   recommended that a check value such as an adler32 or a crc32 be applied to
+   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
+   most applications, the zlib format should be used as is.  Note that comments
+   above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+     windowBits can also be greater than 15 for optional gzip decoding.  Add
+   32 to windowBits to enable zlib and gzip decoding with automatic header
+   detection, or add 16 to decode only the gzip format (the zlib format will
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
+   crc32 instead of an adler32.
+
+     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit2 does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit2() does not process any header information -- that is
+   deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence.  This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
+   can be determined from the adler32 value returned by that call of inflate.
+   The compressor and decompressor must use exactly the same dictionary (see
+   deflateSetDictionary).  For raw inflate, this function can be called
+   immediately after inflateInit2() or inflateReset() and before any call of
+   inflate() to set the dictionary.  The application must insure that the
+   dictionary that was used for compression is provided.
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect adler32 value).  inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+     Skips invalid compressed data until a full flush point (see above the
+   description of deflate with Z_FULL_FLUSH) can be found, or until all
+   available input is skipped.  No output is provided.
+
+     inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+   if no more input was provided, Z_DATA_ERROR if no flush point has been
+   found, or Z_STREAM_ERROR if the stream structure was inconsistent.  In the
+   success case, the application may save the current current value of total_in
+   which indicates where valid compressed data was found.  In the error case,
+   the application may repeatedly call inflateSync, providing more input each
+   time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when randomly accessing a large stream.  The
+   first pass through the stream can periodically record the inflate state,
+   allowing restarting inflate at those points when randomly accessing the
+   stream.
+
+     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.  The
+   stream will keep attributes that may have been set by inflateInit2.
+
+     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+                                      int windowBits));
+/*
+     This function is the same as inflateReset, but it also permits changing
+   the wrap and window size requests.  The windowBits parameter is interpreted
+   the same as it is for inflateInit2.
+
+     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+   the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     This function inserts bits in the inflate input stream.  The intent is
+   that this function is used to start inflating at a bit position in the
+   middle of a byte.  The provided bits will be used before any bytes are used
+   from next_in.  This function should only be used with raw inflate, and
+   should be used before the first inflate() call after inflateInit2() or
+   inflateReset().  bits must be less than or equal to 16, and that many of the
+   least significant bits of value will be inserted in the input.
+
+     If bits is negative, then the input stream bit buffer is emptied.  Then
+   inflatePrime() can be called again to put bits in the buffer.  This is used
+   to clear out bits leftover after feeding inflate a block description prior
+   to feeding inflate codes.
+
+     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+     This function returns two values, one in the lower 16 bits of the return
+   value, and the other in the remaining upper bits, obtained by shifting the
+   return value down 16 bits.  If the upper value is -1 and the lower value is
+   zero, then inflate() is currently decoding information outside of a block.
+   If the upper value is -1 and the lower value is non-zero, then inflate is in
+   the middle of a stored block, with the lower value equaling the number of
+   bytes from the input remaining to copy.  If the upper value is not -1, then
+   it is the number of bits back from the current bit position in the input of
+   the code (literal or length/distance pair) currently being processed.  In
+   that case the lower value is the number of bytes already emitted for that
+   code.
+
+     A code is being processed if inflate is waiting for more input to complete
+   decoding of the code, or if it has completed decoding but is waiting for
+   more output space to write the literal or match data.
+
+     inflateMark() is used to mark locations in the input data for random
+   access, which may be at bit positions, and to note those cases where the
+   output of a code may span boundaries of random access blocks.  The current
+   location in the input stream can be determined from avail_in and data_type
+   as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+     inflateMark returns the value noted above or -1 << 16 if the provided
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     inflateGetHeader() requests that gzip header information be stored in the
+   provided gz_header structure.  inflateGetHeader() may be called after
+   inflateInit2() or inflateReset(), and before the first call of inflate().
+   As inflate() processes the gzip stream, head->done is zero until the header
+   is completed, at which time head->done is set to one.  If a zlib stream is
+   being decoded, then head->done is set to -1 to indicate that there will be
+   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
+   used to force inflate() to return immediately after header processing is
+   complete and before any actual data is decompressed.
+
+     The text, time, xflags, and os fields are filled in with the gzip header
+   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
+   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+   contains the maximum number of bytes to write to extra.  Once done is true,
+   extra_len contains the actual extra field length, and extra contains the
+   extra field, or that field truncated if extra_max is less than extra_len.
+   If name is not Z_NULL, then up to name_max characters are written there,
+   terminated with a zero unless the length is greater than name_max.  If
+   comment is not Z_NULL, then up to comm_max characters are written there,
+   terminated with a zero unless the length is greater than comm_max.  When any
+   of extra, name, or comment are not Z_NULL and the respective field is not
+   present in the header, then that field is set to Z_NULL to signal its
+   absence.  This allows the use of deflateSetHeader() with the returned
+   structure to duplicate the header.  However if those fields are set to
+   allocated memory, then the application will need to save those pointers
+   elsewhere so that they can be eventually freed.
+
+     If inflateGetHeader is not used, then the header information is simply
+   discarded.  The header is always checked for validity, including the header
+   CRC if present.  inflateReset() will reset the process to discard the header
+   information.  The application would need to call inflateGetHeader() again to
+   retrieve the header from the next gzip stream.
+
+     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+                                        unsigned char FAR *window));
+
+     Initialize the internal stream state for decompression using inflateBack()
+   calls.  The fields zalloc, zfree and opaque in strm must be initialized
+   before the call.  If zalloc and zfree are Z_NULL, then the default library-
+   derived memory allocation routines are used.  windowBits is the base two
+   logarithm of the window size, in the range 8..15.  window is a caller
+   supplied buffer of that size.  Except for special applications where it is
+   assured that deflate was used with small window sizes, windowBits must be 15
+   and a 32K byte window must be supplied to be able to decompress general
+   deflate streams.
+
+     See inflateBack() for the usage of these routines.
+
+     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+   the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
+   allocated, or Z_VERSION_ERROR if the version of the library does not match
+   the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+/*
+     inflateBack() does a raw inflate with a single call using a call-back
+   interface for input and output.  This is more efficient than inflate() for
+   file i/o applications in that it avoids copying between the output and the
+   sliding window by simply making the window itself the output buffer.  This
+   function trusts the application to not change the output buffer passed by
+   the output function, at least until inflateBack() returns.
+
+     inflateBackInit() must be called first to allocate the internal state
+   and to initialize the state with the user-provided window buffer.
+   inflateBack() may then be used multiple times to inflate a complete, raw
+   deflate stream with each call.  inflateBackEnd() is then called to free the
+   allocated state.
+
+     A raw deflate stream is one with no zlib or gzip header or trailer.
+   This routine would normally be used in a utility that reads zip or gzip
+   files and writes out uncompressed files.  The utility would decode the
+   header and process the trailer on its own, hence this routine expects only
+   the raw deflate stream to decompress.  This is different from the normal
+   behavior of inflate(), which expects either a zlib or gzip header and
+   trailer around the deflate stream.
+
+     inflateBack() uses two subroutines supplied by the caller that are then
+   called by inflateBack() for input and output.  inflateBack() calls those
+   routines until it reads a complete deflate stream and writes out all of the
+   uncompressed data, or until it encounters an error.  The function's
+   parameters and return types are defined above in the in_func and out_func
+   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
+   number of bytes of provided input, and a pointer to that input in buf.  If
+   there is no input available, in() must return zero--buf is ignored in that
+   case--and inflateBack() will return a buffer error.  inflateBack() will call
+   out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].  out()
+   should return zero on success, or non-zero on failure.  If out() returns
+   non-zero, inflateBack() will return with an error.  Neither in() nor out()
+   are permitted to change the contents of the window provided to
+   inflateBackInit(), which is also the buffer that out() uses to write from.
+   The length written by out() will be at most the window size.  Any non-zero
+   amount of input may be provided by in().
+
+     For convenience, inflateBack() can be provided input on the first call by
+   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
+   in() will be called.  Therefore strm->next_in must be initialized before
+   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
+   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
+   must also be initialized, and then if strm->avail_in is not zero, input will
+   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
+
+     The in_desc and out_desc parameters of inflateBack() is passed as the
+   first parameter of in() and out() respectively when they are called.  These
+   descriptors can be optionally used to pass any information that the caller-
+   supplied in() and out() functions need to do their job.
+
+     On return, inflateBack() will set strm->next_in and strm->avail_in to
+   pass back any unused input that was provided by the last in() call.  The
+   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+   in the deflate stream (in which case strm->msg is set to indicate the nature
+   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+   In the case of Z_BUF_ERROR, an input or output error can be distinguished
+   using strm->next_in which will be Z_NULL only if in() returned an error.  If
+   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+   non-zero.  (in() will always be called before out(), so strm->next_in is
+   assured to be defined if out() returns non-zero.) Note that inflateBack()
+   cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+     All memory allocated by inflateBackInit() is freed.
+
+     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+   state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+     1.0: size of uInt
+     3.2: size of uLong
+     5.4: size of voidpf (pointer)
+     7.6: size of z_off_t
+
+    Compiler, assembler, and debug options:
+     8: DEBUG
+     9: ASMV or ASMINF -- use ASM code
+     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+     11: 0 (reserved)
+
+    One-time table building (smaller code, but not thread-safe if true):
+     12: BUILDFIXED -- build static block decoding tables when needed
+     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+     14,15: 0 (reserved)
+
+    Library content (indicates missing functionality):
+     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+                          deflate code when not needed)
+     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+                    and decode gzip streams (to avoid linking crc code)
+     18-19: 0 (reserved)
+
+    Operation variations (changes in library functionality):
+     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+     21: FASTEST -- deflate algorithm with only one, lowest compression level
+     22,23: 0 (reserved)
+
+    The sprintf variant used by gzprintf (zero is best):
+     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+    Remainder:
+     27-31: 0 (reserved)
+ */
+
+
+                        /* utility functions */
+
+/*
+     The following utility functions are implemented on top of the basic
+   stream-oriented functions.  To simplify the interface, some default options
+   are assumed (compression level and memory usage, standard memory allocation
+   functions).  The source code of these utility functions can be modified if
+   you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
+/*
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed buffer.
+
+     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
+/*
+     Compresses the source buffer into the destination buffer.  The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer.  Upon entry, destLen is the total size of the
+   destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+     compressBound() returns an upper bound on the compressed size after
+   compress() or compress2() on sourceLen bytes.  It would be used before a
+   compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
+/*
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be large enough to hold the entire
+   uncompressed data.  (The size of the uncompressed data must have been saved
+   previously by the compressor and transmitted to the decompressor by some
+   mechanism outside the scope of this compression library.) Upon exit, destLen
+   is the actual size of the uncompressed buffer.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
+*/
+
+
+                        /* gzip file access functions */
+
+/*
+     This library supports reading and writing files in gzip (.gz) format with
+   an interface similar to that of stdio, using the functions that start with
+   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
+   wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef voidp gzFile;       /* opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+     Opens a gzip (.gz) file for reading or writing.  The mode parameter is as
+   in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+   a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+   compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+   for fixed code compression as in "wb9F".  (See the description of
+   deflateInit2 for more information about the strategy parameter.) Also "a"
+   can be used instead of "w" to request that the gzip stream that will be
+   written be appended to the file.  "+" will result in an error, since reading
+   and writing to the same gzip file is not supported.
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.
+
+     gzopen returns NULL if the file could not be opened, if there was
+   insufficient memory to allocate the gzFile state, or if an invalid mode was
+   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+   errno can be checked to determine if the reason gzopen failed was that the
+   file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+     gzdopen associates a gzFile with the file descriptor fd.  File descriptors
+   are obtained from calls like open, dup, creat, pipe or fileno (if the file
+   has been previously opened with fopen).  The mode parameter is as in gzopen.
+
+     The next call of gzclose on the returned gzFile will also close the file
+   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+   mode);.  The duplicated descriptor should be saved to avoid a leak, since
+   gzdopen does not close fd if it fails.
+
+     gzdopen returns NULL if there was insufficient memory to allocate the
+   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
+   used until the next gz* read, write, seek, or close operation, so gzdopen
+   will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+     Set the internal buffer size used by this library's functions.  The
+   default buffer size is 8192 bytes.  This function must be called after
+   gzopen() or gzdopen(), and before any other calls that read or write the
+   file.  The buffer memory allocation is always deferred to the first read or
+   write.  Two buffers are allocated, either both of the specified size when
+   writing, or one of the specified size and the other twice that size when
+   reading.  A larger buffer size of, for example, 64K or 128K bytes will
+   noticeably increase the speed of decompression (reading).
+
+     The new buffer size also affects the maximum length for gzprintf().
+
+     gzbuffer() returns 0 on success, or -1 on failure, such as being called
+   too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level or strategy.  See the description
+   of deflateInit2 for the meaning of these parameters.
+
+     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+   opened for writing.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+     Reads the given number of uncompressed bytes from the compressed file.  If
+   the input file was not in gzip format, gzread copies the given number of
+   bytes into the buffer.
+
+     After reaching the end of a gzip stream in the input, gzread will continue
+   to read, looking for another gzip stream, or failing that, reading the rest
+   of the input file directly without decompression.  The entire input file
+   will be read if gzread is called until it returns less than the requested
+   len.
+
+     gzread returns the number of uncompressed bytes actually read, less than
+   len for end of file, or -1 for error.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+                                voidpc buf, unsigned len));
+/*
+     Writes the given number of uncompressed bytes into the compressed file.
+   gzwrite returns the number of uncompressed bytes written or 0 in case of
+   error.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
+/*
+     Converts, formats, and writes the arguments to the compressed file under
+   control of the format string, as in fprintf.  gzprintf returns the number of
+   uncompressed bytes actually written, or 0 in case of error.  The number of
+   uncompressed bytes written is limited to 8191, or one less than the buffer
+   size given to gzbuffer().  The caller should assure that this limit is not
+   exceeded.  If it is exceeded, then gzprintf() will return an error (0) with
+   nothing written.  In this case, there may also be a buffer overflow with
+   unpredictable consequences, which is possible only if zlib was compiled with
+   the insecure functions sprintf() or vsprintf() because the secure snprintf()
+   or vsnprintf() functions were not available.  This can be determined using
+   zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+     Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+
+     gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+     Reads bytes from the compressed file until len-1 characters are read, or a
+   newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  If any characters are read or if len == 1, the
+   string is terminated with a null character.  If no characters are read due
+   to an end-of-file or len < 1, then the buffer is left untouched.
+
+     gzgets returns buf which is a null-terminated string, or it returns NULL
+   for end-of-file or in case of error.  If there was an error, the contents at
+   buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+     Writes c, converted to an unsigned char, into the compressed file.  gzputc
+   returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+     Reads one byte from the compressed file.  gzgetc returns this byte or -1
+   in case of end of file or error.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+     Push one character back onto the stream to be read as the first character
+   on the next read.  At least one character of push-back is allowed.
+   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
+   fail if c is -1, and may fail if a character has been pushed but not read
+   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
+   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
+   The pushed character will be discarded if the stream is repositioned with
+   gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+     Flushes all pending output into the compressed file.  The parameter flush
+   is as in the deflate() function.  The return value is the zlib error number
+   (see function gzerror below).  gzflush is only permitted when writing.
+
+     If the flush parameter is Z_FINISH, the remaining data is written and the
+   gzip stream is completed in the output.  If gzwrite() is called again, a new
+   gzip stream will be started in the output.  gzread() is able to read such
+   concatented gzip streams.
+
+     gzflush should be called only when strictly necessary because it will
+   degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+                                   z_off_t offset, int whence));
+
+     Sets the starting position for the next gzread or gzwrite on the given
+   compressed file.  The offset represents a number of bytes in the
+   uncompressed data stream.  The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow.  If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+     gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewinds the given file. This function is supported only for reading.
+
+     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+
+     Returns the starting position for the next gzread or gzwrite on the given
+   compressed file.  This position represents a number of bytes in the
+   uncompressed data stream, and is zero when starting, even if appending or
+   reading a gzip stream from the middle of a file using gzdopen().
+
+     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+     Returns the current offset in the file being read or written.  This offset
+   includes the count of bytes that precede the gzip stream, for example when
+   appending or when using gzdopen() for reading.  When reading, the offset
+   does not include as yet unused buffered input.  This information can be used
+   for a progress indicator.  On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+     Returns true (1) if the end-of-file indicator has been set while reading,
+   false (0) otherwise.  Note that the end-of-file indicator is set only if the
+   read tried to go past the end of the input, but came up short.  Therefore,
+   just like feof(), gzeof() may return false even if there is no more data to
+   read, in the event that the last read request was for the exact number of
+   bytes remaining in the input file.  This will happen if the input file size
+   is an exact multiple of the buffer size.
+
+     If gzeof() returns true, then the read functions will return no more data,
+   unless the end-of-file indicator is reset by gzclearerr() and the input file
+   has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+     Returns true (1) if file is being copied directly while reading, or false
+   (0) if file is a gzip stream being decompressed.  This state can change from
+   false to true while reading the input file if the end of a gzip stream is
+   reached, but is followed by data that is not another gzip stream.
+
+     If the input file is empty, gzdirect() will return true, since the input
+   does not contain a gzip stream.
+
+     If gzdirect() is used immediately after gzopen() or gzdopen() it will
+   cause buffers to be allocated to allow reading the file to determine if it
+   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
+   gzdirect().
+*/
+
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+/*
+     Flushes all pending output if necessary, closes the compressed file and
+   deallocates the (de)compression state.  Note that once file is closed, you
+   cannot call gzerror with file, since its structures have been deallocated.
+   gzclose must not be called more than once on the same file, just as free
+   must not be called more than once on the same allocation.
+
+     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+   file operation error, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+     Same as gzclose(), but gzclose_r() is only for use when reading, and
+   gzclose_w() is only for use when writing or appending.  The advantage to
+   using these instead of gzclose() is that they avoid linking in zlib
+   compression or decompression code that is not used when only reading or only
+   writing respectively.  If gzclose() is used, then both compression and
+   decompression code will be included the application when linking to a static
+   zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+     Returns the error message for the last error which occurred on the given
+   compressed file.  errnum is set to zlib error number.  If an error occurred
+   in the file system and not in the compression library, errnum is set to
+   Z_ERRNO and the application may consult errno to get the exact error code.
+
+     The application must not modify the returned string.  Future calls to
+   this function may invalidate the previously returned string.  If file is
+   closed, then the string previously returned by gzerror will no longer be
+   available.
+
+     gzerror() should be used to distinguish errors from end-of-file for those
+   functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+     Clears the error and end-of-file flags for file.  This is analogous to the
+   clearerr() function in stdio.  This is useful for continuing to read a gzip
+   file that is being written concurrently.
+*/
+
+
+                        /* checksum functions */
+
+/*
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the compression
+   library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum.  If buf is Z_NULL, this function returns the
+   required initial value for the checksum.
+
+     An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster.
+
+   Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+                                          z_off_t len2));
+
+     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
+   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+*/
+
+ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+/*
+     Update a running CRC-32 with the bytes buf[0..len-1] and return the
+   updated CRC-32.  If buf is Z_NULL, this function returns the required
+   initial value for the for the crc.  Pre- and post-conditioning (one's
+   complement) is performed within this function so it shouldn't be done by the
+   application.
+
+   Usage example:
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+     Combine two CRC-32 check values into one.  For two sequences of bytes,
+   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
+   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+   len2.
+*/
+
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
+#define deflateInit(strm, level) \
+        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit(strm) \
+        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+#define inflateBackInit(strm, windowBits, window) \
+        inflateBackInit_((strm), (windowBits), (window), \
+                                            ZLIB_VERSION, sizeof(z_stream))
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+#  define gzopen gzopen64
+#  define gzseek gzseek64
+#  define gztell gztell64
+#  define gzoffset gzoffset64
+#  define adler32_combine adler32_combine64
+#  define crc32_combine crc32_combine64
+#  ifdef _LARGEFILE64_SOURCE
+     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#  endif
+#else
+   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+/* hack for buggy compilers */
+#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
+    struct internal_state {int dummy;};
+#endif
+
+/* undocumented functions */
+ZEXTERN const char   * ZEXPORT zError           OF((int));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
+ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
--- a/tools/build_windows.bat	Wed Oct 24 10:23:37 2012 +0100
+++ b/tools/build_windows.bat	Wed Oct 24 13:21:18 2012 +0100
@@ -10,7 +10,7 @@
 
 echo Fetching all DLLs...
 for %%G in (QtCore4 QtGui4 QtNetwork4 libgcc_s_dw2-1 mingwm10) do (
-    xcopy /d/y %QTDIR%\%%G.dll bin\
+    xcopy /d/y/l %QTDIR%\%%G.dll bin\
 )
 
 if not exist %CD%\misc\winutils\bin\ mkdir %CD%\misc\winutils\bin\
@@ -20,6 +20,9 @@
 if not exist %CD%\misc\winutils\bin\SDL_mixer.dll cscript %CD%\tools\w32DownloadUnzip.vbs http://www.libsdl.org/projects/SDL_mixer/release/SDL_mixer-1.2.12-win32.zip %CD%\misc\winutils\bin
 if not exist %CD%\misc\winutils\bin\SDL_ttf.dll cscript %CD%\tools\w32DownloadUnzip.vbs  http://www.libsdl.org/projects/SDL_ttf/release/SDL_ttf-2.0.11-win32.zip %CD%\misc\winutils\bin
 
+::this is needed because fpc png unit hardcodes libpng-1.2.12
+if not exist %CD%\misc\winutils\bin\libpng13.dll copy /y %CD%\misc\winutils\bin\libpng15-15.dll %CD%\misc\winutils\bin\libpng13.dll
+
 xcopy /d/y %CD%\misc\winutils\bin\*.dll bin
 xcopy /d/y %CD%\misc\winutils\bin\*.txt bin
 
@@ -28,7 +31,7 @@
 
 echo Running cmake...
 set ERRORLEVEL=
-cmake -G "MinGW Makefiles" -DCMAKE_INCLUDE_PATH="%CD%\misc\winutils\include" -DCMAKE_LIBRARY_PATH="%CD%\misc\winutils\lib" .
+cmake -G "MinGW Makefiles" -DCMAKE_INCLUDE_PATH="%CD%\misc\winutils\include" -DCMAKE_LIBRARY_PATH="%CD%\misc\winutils\lib" -DPNG_LIBRARY="%CD%\misc\winutils\bin\libpng13.dll" .
 
 if %ERRORLEVEL% NEQ 0 goto exitpoint
 
@@ -43,7 +46,7 @@
 if %ERRORLEVEL% NEQ 0 goto exitpoint
 
 echo Creating commodity shortcut...
-COPY /y %CD%\misc\winutils\Hedgewars.lnk C:%HOMEPATH%\Desktop\Hedgewars.lnk
+copy /y %CD%\misc\winutils\Hedgewars.lnk C:%HOMEPATH%\Desktop\Hedgewars.lnk
 
 echo ALL DONE, Hedgewars has been successfully compiled and installed