sndCover now falls back to sndWatchThis OR sndFire.
sndDrat and sndBugger now fall back to each other.
diff --git a/project_files/HedgewarsMobile/Hedgewars.xcodeproj/project.pbxproj b/project_files/HedgewarsMobile/Hedgewars.xcodeproj/project.pbxproj
--- a/project_files/HedgewarsMobile/Hedgewars.xcodeproj/project.pbxproj
+++ b/project_files/HedgewarsMobile/Hedgewars.xcodeproj/project.pbxproj
@@ -1830,7 +1830,7 @@
);
runOnlyForDeploymentPostprocessing = 0;
shellPath = /bin/sh;
- shellScript = "# Build libfpc.a\n# 9 July 2006 (Jonas Maebe)\n# * original version\n# 15 September 2006 (Erling Johansen)\n# * simplified\n# 26 April 2007 (Jonas Maebe)\n# * added support for ppc64/x86_64 (future proofing)\n# 4 August 2007 (Jonas Maebe)\n# * call ranlib after ar so the toc of the library is up-to-date\n# 3 January 2009 (Jonas Maebe)\n# * support for ARM\n# 24 October 2009 (Jonas Maebe)\n# * don't hardcode version 2.3.1 anymore under certain circumstances\n# * use the FPC_RTL_UNITS_BASE setting\n# 13 December 2009 (Jonas Maebe)\n# * use new FPC_COMPILER_BINARY_DIR setting to make it easier to change the used FPC version\n\nrm -f \"$TARGET_TEMP_DIR\"/*.a\nnarch=\n\n#temparchs=`echo $ARCHS|sed -e 's/arm[^\\w]*/arm\\\n#/'|sort -u`\ntemparchs=`echo $ARCHS|sort -u`\necho $temparchs\nfor arch in $temparchs\ndo\n\ttargetos=darwin;\n\tcase $arch in\n arm64) fpc_arch=rossa64; fpc_rtl=aarch64 ;;\n armv7) fpc_arch=rossarm; fpc_rtl=arm ;;\n x86_64) fpc_arch=x64; fpc_rtl=x86_64; targetos=iphonesim ;;\n# ppc) fpc_arch=ppc; fpc_rtl=powerpc ;;\n#\t\ti386) fpc_arch=386; fpc_rtl=i386; targetos=iphonesim ;;\n#\t\tppc64) fpc_arch=ppc64; fpc_rtl=powerpc64 ;;\n#\t\tx86_64) fpc_arch=x64; fpc_rtl=x86_64 ;;\n#\t\tarm*) fpc_arch=arm; fpc_rtl=arm ;;\n\t\t*) continue\n\tesac\n\tif test -e \"${FPC_COMPILER_BINARY_DIR}\"/ppc${fpc_arch}\n\tthen\n\t\tupath=\"$FPC_RTL_UNITS_BASE\"/`\"${FPC_COMPILER_BINARY_DIR}\"/ppc${fpc_arch} -iV`/units/${fpc_rtl}-${targetos}\n\t\tar -q \"$TARGET_TEMP_DIR\"/libfpc${narch}.a `ls \"$upath\"/*/*.o | grep -v 'darwin/fv/'`\n\t\tranlib \"$TARGET_TEMP_DIR\"/libfpc${narch}.a\n\t\tnarch=${narch}x\n\telse\n\t\techo error: can\\'t build libfpc.a for $arch \\(${FPC_COMPILER_BINARY_DIR}/ppc${fpc_arch} not found, derived from FPC_COMPILER_BINARY_DIR project setting\\)\n\tfi\ndone\n \nif test ${#narch} -gt 1\nthen\n\tlipo -create \"$TARGET_TEMP_DIR\"/libfpc*.a -output \"$TARGET_BUILD_DIR\"/libfpc.a\n\trm -f \"$TARGET_TEMP_DIR\"/*.a\nelse\n\tmv \"$TARGET_TEMP_DIR\"/libfpc.a \"$TARGET_BUILD_DIR\"\nfi\n";
+ shellScript = "# Build libfpc.a\n# 9 July 2006 (Jonas Maebe)\n# * original version\n# 15 September 2006 (Erling Johansen)\n# * simplified\n# 26 April 2007 (Jonas Maebe)\n# * added support for ppc64/x86_64 (future proofing)\n# 4 August 2007 (Jonas Maebe)\n# * call ranlib after ar so the toc of the library is up-to-date\n# 3 January 2009 (Jonas Maebe)\n# * support for ARM\n# 24 October 2009 (Jonas Maebe)\n# * don't hardcode version 2.3.1 anymore under certain circumstances\n# * use the FPC_RTL_UNITS_BASE setting\n# 13 December 2009 (Jonas Maebe)\n# * use new FPC_COMPILER_BINARY_DIR setting to make it easier to change the used FPC version\n\nrm -f \"$TARGET_TEMP_DIR\"/*.a\nnarch=\n\n#temparchs=`echo $ARCHS|sed -e 's/arm[^\\w]*/arm\\\n#/'|sort -u`\ntemparchs=`echo $ARCHS|sort -u`\necho $temparchs\nfor arch in $temparchs\ndo\n\ttargetos=darwin;\n\tcase $arch in\n arm64) fpc_arch=a64; fpc_rtl=aarch64 ;;\n armv7) fpc_arch=arm; fpc_rtl=arm ;;\n x86_64) fpc_arch=x64; fpc_rtl=x86_64; targetos=iphonesim ;;\n# ppc) fpc_arch=ppc; fpc_rtl=powerpc ;;\n#\t\ti386) fpc_arch=386; fpc_rtl=i386; targetos=iphonesim ;;\n#\t\tppc64) fpc_arch=ppc64; fpc_rtl=powerpc64 ;;\n#\t\tx86_64) fpc_arch=x64; fpc_rtl=x86_64 ;;\n#\t\tarm*) fpc_arch=arm; fpc_rtl=arm ;;\n\t\t*) continue\n\tesac\n\tif test -e \"${FPC_COMPILER_BINARY_DIR}\"/ppc${fpc_arch}\n\tthen\n\t\tupath=\"$FPC_RTL_UNITS_BASE\"/`\"${FPC_COMPILER_BINARY_DIR}\"/ppc${fpc_arch} -iV`/units/${fpc_rtl}-${targetos}\n\t\tar -q \"$TARGET_TEMP_DIR\"/libfpc${narch}.a `ls \"$upath\"/*/*.o | grep -v 'darwin/fv/'`\n\t\tranlib \"$TARGET_TEMP_DIR\"/libfpc${narch}.a\n\t\tnarch=${narch}x\n\telse\n\t\techo error: can\\'t build libfpc.a for $arch \\(${FPC_COMPILER_BINARY_DIR}/ppc${fpc_arch} not found, derived from FPC_COMPILER_BINARY_DIR project setting\\)\n\tfi\ndone\n \nif test ${#narch} -gt 1\nthen\n\tlipo -create \"$TARGET_TEMP_DIR\"/libfpc*.a -output \"$TARGET_BUILD_DIR\"/libfpc.a\n\trm -f \"$TARGET_TEMP_DIR\"/*.a\nelse\n\tmv \"$TARGET_TEMP_DIR\"/libfpc.a \"$TARGET_BUILD_DIR\"\nfi\n";
};
928301560F10E04C00CC5A3C /* Compile Pascal Sources */ = {
isa = PBXShellScriptBuildPhase;
@@ -1845,7 +1845,7 @@
);
runOnlyForDeploymentPostprocessing = 0;
shellPath = /bin/sh;
- shellScript = "# Compile Pascal Sources\n# 15sep06,ejo written.\n# 26 April 2007 - Jonas Maebe\n# * support for ppc64 and x86_64\n# * don't run when cleaning (in case running scripts when cleaning is ever fixed by Apple) (removed)\n# * split the options in FPC_COMMON_FLAGS (common to all configurations) and FPC_CFG_SPECIFIC_FLAGS (per configuration)\n# 4 January 2009 - Jonas Maebe\n# * support for ARM\n# 24 October 2009 - Jonas Maebe\n# * don't hardcode 2.3.1 in some cases anymore\n# 13 December 2009 (Jonas Maebe)\n# * use new FPC_COMPILER_BINARY_DIR setting to make it easier to change the used FPC version\n\nif test ! -e \"$FPC_MAIN_FILE\"\nthen\n\techo error: FPC_MAIN_FILE not found \\($FPC_MAIN_FILE\\)\n\texit 2\nfi\n\nfor variant in $BUILD_VARIANTS\ndo\n\tfor arch in $ARCHS\n\tdo\n\t\ttargetos=darwin;\n\t\tcase $arch in\n arm64) fpc_arch=rossa64; fpc_rtl=aarch64 ;;\n armv7) fpc_arch=rossarm; fpc_rtl=arm ;;\n x86_64) fpc_arch=x64; fpc_rtl=x86_64; targetos=iphonesim ;;\n#\t\t\tppc) fpc_arch=ppc; fpc_rtl=powerpc ;;\n#\t\t\ti386) fpc_arch=386; fpc_rtl=i386; targetos=iphonesim ;;\n#\t\t\tppc64) fpc_arch=ppc64; fpc_rtl=powerpc64 ;;\n#\t\t\tx86_64) fpc_arch=x64; fpc_rtl=x86_64 ;;\n#\t\t\tarm*) fpc_arch=arm; fpc_rtl=arm ;;\n\t\t\t*) continue\n\t\tesac\n\n\t\tapp_target_temp_dir=$CONFIGURATION_TEMP_DIR/`basename \"$PROJECT_TEMP_DIR\"`\n\t\tout_dir=$app_target_temp_dir/`basename \"$DERIVED_SOURCES_DIR\"`-$variant/$arch\n\t\tfpccompiler=\"${FPC_COMPILER_BINARY_DIR}/ppc${fpc_arch}\"\n\t\tif test -e \"$fpccompiler\"\n\t\tthen\n\t\t\tfpcversion=`\"$fpccompiler\" -iV`\n\t\t\tmainunitdir=\"$FPC_RTL_UNITS_BASE/$fpcversion/units/${fpc_rtl}-${targetos}/\"\n\t\t\tmkdir -p \"$out_dir\"\n\t\t\tcd \"$out_dir\"\n\t\t\techo \"Compiling to $out_dir\"\n\t\t\trm -f compilefailed\n\t\n\t\t\t# delete any ppu files for which the \".s\" file was somehow deleted (Xcode does that sometimes in case of errors),\n\t\t\t# so that FPC will recompile the unit\n\t\t\tfor file in *.ppu\n\t\t\tdo\n\t\t\t\tasmname=`basename \"$file\" ppu`s\n\t\t\t\tif [ ! -f \"$asmname\" ]; then\n\t\t\t\t\t# can fail in case there are no .ppu files, since then it will try to erase the file with name '*.ppu'\n\t\t\t\t\t# -> use -f so it won't give an error message\n\t\t\t\t\trm -f \"$file\"\n\t\t\t\tfi\n\t\t\tdone\n\n\t\t\techo $fpccompiler -n -l -viwn -a -s -vbr -FE. $FPC_COMMON_OPTIONS $FPC_SPECIFIC_OPTIONS '\\' >ppccmd.sh\n\t\t\techo -Fi\\\"`dirname \"$FPC_MAIN_FILE\"`\\\" '\\' >>ppccmd.sh\n\t\t\techo -Fu\"$mainunitdir/*\" -Fu\"$mainunitdir/rtl\" '\\' >>ppccmd.sh\n\t\t\t# allow FPC_UNIT_PATHS to override default search directory\n\t\t\techo $FPC_UNIT_PATHS '\\' >>ppccmd.sh\n\t\t\techo \\\"$FPC_MAIN_FILE\\\" >>ppccmd.sh\n\t\t\t# cat ppccmd.sh\n\n\t\t\t/bin/sh ppccmd.sh\n\t\t\tif [ $? != 0 ]; then\n\t\t\t\ttouch \"$out_dir\"/compilefailed\n\t\t\t\texit 1\n\t\t\tfi\n\t\telse\n\t\t\ttouch \"$out_dir\"/compilefailed\n\t\t\techo $FPC_MAIN_FILE:1: error: 1: can\\'t compile for $arch \\(ppc${fpc_arch} not found\\)\n\t\t\texit 2\n\t\tfi\n\tdone\ndone\n";
+ shellScript = "# Compile Pascal Sources\n# 15sep06,ejo written.\n# 26 April 2007 - Jonas Maebe\n# * support for ppc64 and x86_64\n# * don't run when cleaning (in case running scripts when cleaning is ever fixed by Apple) (removed)\n# * split the options in FPC_COMMON_FLAGS (common to all configurations) and FPC_CFG_SPECIFIC_FLAGS (per configuration)\n# 4 January 2009 - Jonas Maebe\n# * support for ARM\n# 24 October 2009 - Jonas Maebe\n# * don't hardcode 2.3.1 in some cases anymore\n# 13 December 2009 (Jonas Maebe)\n# * use new FPC_COMPILER_BINARY_DIR setting to make it easier to change the used FPC version\n\nif test ! -e \"$FPC_MAIN_FILE\"\nthen\n\techo error: FPC_MAIN_FILE not found \\($FPC_MAIN_FILE\\)\n\texit 2\nfi\n\nfor variant in $BUILD_VARIANTS\ndo\n\tfor arch in $ARCHS\n\tdo\n\t\ttargetos=darwin;\n\t\tcase $arch in\n arm64) fpc_arch=a64; fpc_rtl=aarch64 ;;\n armv7) fpc_arch=arm; fpc_rtl=arm ;;\n x86_64) fpc_arch=x64; fpc_rtl=x86_64; targetos=iphonesim ;;\n#\t\t\tppc) fpc_arch=ppc; fpc_rtl=powerpc ;;\n#\t\t\ti386) fpc_arch=386; fpc_rtl=i386; targetos=iphonesim ;;\n#\t\t\tppc64) fpc_arch=ppc64; fpc_rtl=powerpc64 ;;\n#\t\t\tx86_64) fpc_arch=x64; fpc_rtl=x86_64 ;;\n#\t\t\tarm*) fpc_arch=arm; fpc_rtl=arm ;;\n\t\t\t*) continue\n\t\tesac\n\n\t\tapp_target_temp_dir=$CONFIGURATION_TEMP_DIR/`basename \"$PROJECT_TEMP_DIR\"`\n\t\tout_dir=$app_target_temp_dir/`basename \"$DERIVED_SOURCES_DIR\"`-$variant/$arch\n\t\tfpccompiler=\"${FPC_COMPILER_BINARY_DIR}/ppc${fpc_arch}\"\n\t\tif test -e \"$fpccompiler\"\n\t\tthen\n\t\t\tfpcversion=`\"$fpccompiler\" -iV`\n\t\t\tmainunitdir=\"$FPC_RTL_UNITS_BASE/$fpcversion/units/${fpc_rtl}-${targetos}/\"\n\t\t\tmkdir -p \"$out_dir\"\n\t\t\tcd \"$out_dir\"\n\t\t\techo \"Compiling to $out_dir\"\n\t\t\trm -f compilefailed\n\t\n\t\t\t# delete any ppu files for which the \".s\" file was somehow deleted (Xcode does that sometimes in case of errors),\n\t\t\t# so that FPC will recompile the unit\n\t\t\tfor file in *.ppu\n\t\t\tdo\n\t\t\t\tasmname=`basename \"$file\" ppu`s\n\t\t\t\tif [ ! -f \"$asmname\" ]; then\n\t\t\t\t\t# can fail in case there are no .ppu files, since then it will try to erase the file with name '*.ppu'\n\t\t\t\t\t# -> use -f so it won't give an error message\n\t\t\t\t\trm -f \"$file\"\n\t\t\t\tfi\n\t\t\tdone\n\n\t\t\techo $fpccompiler -n -l -viwn -a -s -vbr -FE. $FPC_COMMON_OPTIONS $FPC_SPECIFIC_OPTIONS '\\' >ppccmd.sh\n\t\t\techo -Fi\\\"`dirname \"$FPC_MAIN_FILE\"`\\\" '\\' >>ppccmd.sh\n\t\t\techo -Fu\"$mainunitdir/*\" -Fu\"$mainunitdir/rtl\" '\\' >>ppccmd.sh\n\t\t\t# allow FPC_UNIT_PATHS to override default search directory\n\t\t\techo $FPC_UNIT_PATHS '\\' >>ppccmd.sh\n\t\t\techo \\\"$FPC_MAIN_FILE\\\" >>ppccmd.sh\n\t\t\t# cat ppccmd.sh\n\n\t\t\t/bin/sh ppccmd.sh\n\t\t\tif [ $? != 0 ]; then\n\t\t\t\ttouch \"$out_dir\"/compilefailed\n\t\t\t\texit 1\n\t\t\tfi\n\t\telse\n\t\t\ttouch \"$out_dir\"/compilefailed\n\t\t\techo $FPC_MAIN_FILE:1: error: 1: can\\'t compile for $arch \\(ppc${fpc_arch} not found\\)\n\t\t\texit 2\n\t\tfi\n\tdone\ndone\n";
};
/* End PBXShellScriptBuildPhase section */
@@ -2141,7 +2141,7 @@
ENABLE_BITCODE = NO;
ENABLE_STRICT_OBJC_MSGSEND = YES;
FPC_COMMON_OPTIONS = "-l- -dIPHONEOS -Cs2000000 -B -vwi -Sgix -Fi${PROJECT_DIR}";
- FPC_COMPILER_BINARY_DIR = /usr/local/lib/fpc/3.1.1;
+ FPC_COMPILER_BINARY_DIR = /usr/local/lib/fpc/3.0.1;
FPC_MAIN_FILE = "$(PROJECT_DIR)/../../hedgewars/hwLibrary.pas";
FPC_RTL_UNITS_BASE = /usr/local/lib/fpc;
FPC_SPECIFIC_OPTIONS = "-Ci- -Cr- -Co- -O2 -Xs -dNOCONSOLE";
@@ -2258,7 +2258,7 @@
ENABLE_BITCODE = NO;
ENABLE_STRICT_OBJC_MSGSEND = YES;
FPC_COMMON_OPTIONS = "-l- -dIPHONEOS -Cs2000000 -B -vwi -Sgix -Fi${PROJECT_DIR}";
- FPC_COMPILER_BINARY_DIR = /usr/local/lib/fpc/3.1.1;
+ FPC_COMPILER_BINARY_DIR = /usr/local/lib/fpc/3.0.1;
FPC_MAIN_FILE = "$(PROJECT_DIR)/../../hedgewars/hwLibrary.pas";
FPC_RTL_UNITS_BASE = /usr/local/lib/fpc;
FPC_SPECIFIC_OPTIONS = "-dDEBUGFILE -O- -g -gl -gw2 -gt -ghttt -Xs-";
@@ -2423,7 +2423,7 @@
ENABLE_STRICT_OBJC_MSGSEND = YES;
ENABLE_TESTABILITY = YES;
FPC_COMMON_OPTIONS = "-l- -dIPHONEOS -Cs2000000 -B -vwi -Sgix -Fi${PROJECT_DIR}";
- FPC_COMPILER_BINARY_DIR = /usr/local/lib/fpc/3.1.1;
+ FPC_COMPILER_BINARY_DIR = /usr/local/lib/fpc/3.0.1;
FPC_MAIN_FILE = "$(PROJECT_DIR)/../../hedgewars/hwLibrary.pas";
FPC_RTL_UNITS_BASE = /usr/local/lib/fpc;
FPC_SPECIFIC_OPTIONS = "-Tiphonesim -dDEBUGFILE -O- -g -gl -gw2 -gt -ghttt -Xs-";
@@ -2503,7 +2503,7 @@
ENABLE_BITCODE = NO;
ENABLE_STRICT_OBJC_MSGSEND = YES;
FPC_COMMON_OPTIONS = "-l- -dIPHONEOS -Cs2000000 -B -vwi -Sgix -Fi${PROJECT_DIR}";
- FPC_COMPILER_BINARY_DIR = /usr/local/lib/fpc/3.1.1;
+ FPC_COMPILER_BINARY_DIR = /usr/local/lib/fpc/3.0.1;
FPC_MAIN_FILE = "$(PROJECT_DIR)/../../hedgewars/hwLibrary.pas";
FPC_RTL_UNITS_BASE = /usr/local/lib/fpc;
FPC_SPECIFIC_OPTIONS = "-Ci- -Cr- -Co- -O2 -Xs -dDEBUGFILE";