--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/misc/winutils/include/png.h Wed Oct 24 13:21:18 2012 +0100
@@ -0,0 +1,2674 @@
+
+/* png.h - header file for PNG reference library
+ *
+ * libpng version 1.5.13 - September 27, 2012
+ * Copyright (c) 1998-2012 Glenn Randers-Pehrson
+ * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
+ * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
+ *
+ * This code is released under the libpng license (See LICENSE, below)
+ *
+ * Authors and maintainers:
+ * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat
+ * libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger
+ * libpng versions 0.97, January 1998, through 1.5.13 - September 27, 2012: Glenn
+ * See also "Contributing Authors", below.
+ *
+ * Note about libpng version numbers:
+ *
+ * Due to various miscommunications, unforeseen code incompatibilities
+ * and occasional factors outside the authors' control, version numbering
+ * on the library has not always been consistent and straightforward.
+ * The following table summarizes matters since version 0.89c, which was
+ * the first widely used release:
+ *
+ * source png.h png.h shared-lib
+ * version string int version
+ * ------- ------ ----- ----------
+ * 0.89c "1.0 beta 3" 0.89 89 1.0.89
+ * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90]
+ * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95]
+ * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96]
+ * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97]
+ * 0.97c 0.97 97 2.0.97
+ * 0.98 0.98 98 2.0.98
+ * 0.99 0.99 98 2.0.99
+ * 0.99a-m 0.99 99 2.0.99
+ * 1.00 1.00 100 2.1.0 [100 should be 10000]
+ * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000]
+ * 1.0.1 png.h string is 10001 2.1.0
+ * 1.0.1a-e identical to the 10002 from here on, the shared library
+ * 1.0.2 source version) 10002 is 2.V where V is the source code
+ * 1.0.2a-b 10003 version, except as noted.
+ * 1.0.3 10003
+ * 1.0.3a-d 10004
+ * 1.0.4 10004
+ * 1.0.4a-f 10005
+ * 1.0.5 (+ 2 patches) 10005
+ * 1.0.5a-d 10006
+ * 1.0.5e-r 10100 (not source compatible)
+ * 1.0.5s-v 10006 (not binary compatible)
+ * 1.0.6 (+ 3 patches) 10006 (still binary incompatible)
+ * 1.0.6d-f 10007 (still binary incompatible)
+ * 1.0.6g 10007
+ * 1.0.6h 10007 10.6h (testing xy.z so-numbering)
+ * 1.0.6i 10007 10.6i
+ * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0)
+ * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible)
+ * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible)
+ * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible)
+ * 1.0.7 1 10007 (still compatible)
+ * 1.0.8beta1-4 1 10008 2.1.0.8beta1-4
+ * 1.0.8rc1 1 10008 2.1.0.8rc1
+ * 1.0.8 1 10008 2.1.0.8
+ * 1.0.9beta1-6 1 10009 2.1.0.9beta1-6
+ * 1.0.9rc1 1 10009 2.1.0.9rc1
+ * 1.0.9beta7-10 1 10009 2.1.0.9beta7-10
+ * 1.0.9rc2 1 10009 2.1.0.9rc2
+ * 1.0.9 1 10009 2.1.0.9
+ * 1.0.10beta1 1 10010 2.1.0.10beta1
+ * 1.0.10rc1 1 10010 2.1.0.10rc1
+ * 1.0.10 1 10010 2.1.0.10
+ * 1.0.11beta1-3 1 10011 2.1.0.11beta1-3
+ * 1.0.11rc1 1 10011 2.1.0.11rc1
+ * 1.0.11 1 10011 2.1.0.11
+ * 1.0.12beta1-2 2 10012 2.1.0.12beta1-2
+ * 1.0.12rc1 2 10012 2.1.0.12rc1
+ * 1.0.12 2 10012 2.1.0.12
+ * 1.1.0a-f - 10100 2.1.1.0a-f (branch abandoned)
+ * 1.2.0beta1-2 2 10200 2.1.2.0beta1-2
+ * 1.2.0beta3-5 3 10200 3.1.2.0beta3-5
+ * 1.2.0rc1 3 10200 3.1.2.0rc1
+ * 1.2.0 3 10200 3.1.2.0
+ * 1.2.1beta1-4 3 10201 3.1.2.1beta1-4
+ * 1.2.1rc1-2 3 10201 3.1.2.1rc1-2
+ * 1.2.1 3 10201 3.1.2.1
+ * 1.2.2beta1-6 12 10202 12.so.0.1.2.2beta1-6
+ * 1.0.13beta1 10 10013 10.so.0.1.0.13beta1
+ * 1.0.13rc1 10 10013 10.so.0.1.0.13rc1
+ * 1.2.2rc1 12 10202 12.so.0.1.2.2rc1
+ * 1.0.13 10 10013 10.so.0.1.0.13
+ * 1.2.2 12 10202 12.so.0.1.2.2
+ * 1.2.3rc1-6 12 10203 12.so.0.1.2.3rc1-6
+ * 1.2.3 12 10203 12.so.0.1.2.3
+ * 1.2.4beta1-3 13 10204 12.so.0.1.2.4beta1-3
+ * 1.0.14rc1 13 10014 10.so.0.1.0.14rc1
+ * 1.2.4rc1 13 10204 12.so.0.1.2.4rc1
+ * 1.0.14 10 10014 10.so.0.1.0.14
+ * 1.2.4 13 10204 12.so.0.1.2.4
+ * 1.2.5beta1-2 13 10205 12.so.0.1.2.5beta1-2
+ * 1.0.15rc1-3 10 10015 10.so.0.1.0.15rc1-3
+ * 1.2.5rc1-3 13 10205 12.so.0.1.2.5rc1-3
+ * 1.0.15 10 10015 10.so.0.1.0.15
+ * 1.2.5 13 10205 12.so.0.1.2.5
+ * 1.2.6beta1-4 13 10206 12.so.0.1.2.6beta1-4
+ * 1.0.16 10 10016 10.so.0.1.0.16
+ * 1.2.6 13 10206 12.so.0.1.2.6
+ * 1.2.7beta1-2 13 10207 12.so.0.1.2.7beta1-2
+ * 1.0.17rc1 10 10017 12.so.0.1.0.17rc1
+ * 1.2.7rc1 13 10207 12.so.0.1.2.7rc1
+ * 1.0.17 10 10017 12.so.0.1.0.17
+ * 1.2.7 13 10207 12.so.0.1.2.7
+ * 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5
+ * 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5
+ * 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5
+ * 1.0.18 10 10018 12.so.0.1.0.18
+ * 1.2.8 13 10208 12.so.0.1.2.8
+ * 1.2.9beta1-3 13 10209 12.so.0.1.2.9beta1-3
+ * 1.2.9beta4-11 13 10209 12.so.0.9[.0]
+ * 1.2.9rc1 13 10209 12.so.0.9[.0]
+ * 1.2.9 13 10209 12.so.0.9[.0]
+ * 1.2.10beta1-7 13 10210 12.so.0.10[.0]
+ * 1.2.10rc1-2 13 10210 12.so.0.10[.0]
+ * 1.2.10 13 10210 12.so.0.10[.0]
+ * 1.4.0beta1-5 14 10400 14.so.0.0[.0]
+ * 1.2.11beta1-4 13 10211 12.so.0.11[.0]
+ * 1.4.0beta7-8 14 10400 14.so.0.0[.0]
+ * 1.2.11 13 10211 12.so.0.11[.0]
+ * 1.2.12 13 10212 12.so.0.12[.0]
+ * 1.4.0beta9-14 14 10400 14.so.0.0[.0]
+ * 1.2.13 13 10213 12.so.0.13[.0]
+ * 1.4.0beta15-36 14 10400 14.so.0.0[.0]
+ * 1.4.0beta37-87 14 10400 14.so.14.0[.0]
+ * 1.4.0rc01 14 10400 14.so.14.0[.0]
+ * 1.4.0beta88-109 14 10400 14.so.14.0[.0]
+ * 1.4.0rc02-08 14 10400 14.so.14.0[.0]
+ * 1.4.0 14 10400 14.so.14.0[.0]
+ * 1.4.1beta01-03 14 10401 14.so.14.1[.0]
+ * 1.4.1rc01 14 10401 14.so.14.1[.0]
+ * 1.4.1beta04-12 14 10401 14.so.14.1[.0]
+ * 1.4.1 14 10401 14.so.14.1[.0]
+ * 1.4.2 14 10402 14.so.14.2[.0]
+ * 1.4.3 14 10403 14.so.14.3[.0]
+ * 1.4.4 14 10404 14.so.14.4[.0]
+ * 1.5.0beta01-58 15 10500 15.so.15.0[.0]
+ * 1.5.0rc01-07 15 10500 15.so.15.0[.0]
+ * 1.5.0 15 10500 15.so.15.0[.0]
+ * 1.5.1beta01-11 15 10501 15.so.15.1[.0]
+ * 1.5.1rc01-02 15 10501 15.so.15.1[.0]
+ * 1.5.1 15 10501 15.so.15.1[.0]
+ * 1.5.2beta01-03 15 10502 15.so.15.2[.0]
+ * 1.5.2rc01-03 15 10502 15.so.15.2[.0]
+ * 1.5.2 15 10502 15.so.15.2[.0]
+ * 1.5.3beta01-10 15 10503 15.so.15.3[.0]
+ * 1.5.3rc01-02 15 10503 15.so.15.3[.0]
+ * 1.5.3beta11 15 10503 15.so.15.3[.0]
+ * 1.5.3 [omitted]
+ * 1.5.4beta01-08 15 10504 15.so.15.4[.0]
+ * 1.5.4rc01 15 10504 15.so.15.4[.0]
+ * 1.5.4 15 10504 15.so.15.4[.0]
+ * 1.5.5beta01-08 15 10505 15.so.15.5[.0]
+ * 1.5.5rc01 15 10505 15.so.15.5[.0]
+ * 1.5.5 15 10505 15.so.15.5[.0]
+ * 1.5.6beta01-07 15 10506 15.so.15.6[.0]
+ * 1.5.6rc01-03 15 10506 15.so.15.6[.0]
+ * 1.5.6 15 10506 15.so.15.6[.0]
+ * 1.5.7beta01-05 15 10507 15.so.15.7[.0]
+ * 1.5.7rc01-03 15 10507 15.so.15.7[.0]
+ * 1.5.7 15 10507 15.so.15.7[.0]
+ * 1.5.8beta01 15 10508 15.so.15.8[.0]
+ * 1.5.8rc01 15 10508 15.so.15.8[.0]
+ * 1.5.8 15 10508 15.so.15.8[.0]
+ * 1.5.9beta01-02 15 10509 15.so.15.9[.0]
+ * 1.5.9rc01 15 10509 15.so.15.9[.0]
+ * 1.5.9 15 10509 15.so.15.9[.0]
+ * 1.5.10beta01-05 15 10510 15.so.15.10[.0]
+ * 1.5.10 15 10510 15.so.15.10[.0]
+ * 1.5.11beta01 15 10511 15.so.15.11[.0]
+ * 1.5.11rc01-05 15 10511 15.so.15.11[.0]
+ * 1.5.11 15 10511 15.so.15.11[.0]
+ * 1.5.12 15 10512 15.so.15.12[.0]
+ * 1.5.13beta01-02 15 10513 15.so.15.13[.0]
+ * 1.5.13rc01 15 10513 15.so.15.13[.0]
+ * 1.5.13 15 10513 15.so.15.13[.0]
+ *
+ * Henceforth the source version will match the shared-library major
+ * and minor numbers; the shared-library major version number will be
+ * used for changes in backward compatibility, as it is intended. The
+ * PNG_LIBPNG_VER macro, which is not used within libpng but is available
+ * for applications, is an unsigned integer of the form xyyzz corresponding
+ * to the source version x.y.z (leading zeros in y and z). Beta versions
+ * were given the previous public release number plus a letter, until
+ * version 1.0.6j; from then on they were given the upcoming public
+ * release number plus "betaNN" or "rcNN".
+ *
+ * Binary incompatibility exists only when applications make direct access
+ * to the info_ptr or png_ptr members through png.h, and the compiled
+ * application is loaded with a different version of the library.
+ *
+ * DLLNUM will change each time there are forward or backward changes
+ * in binary compatibility (e.g., when a new feature is added).
+ *
+ * See libpng-manual.txt or libpng.3 for more information. The PNG
+ * specification is available as a W3C Recommendation and as an ISO
+ * Specification, <http://www.w3.org/TR/2003/REC-PNG-20031110/
+ */
+
+/*
+ * COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
+ *
+ * If you modify libpng you may insert additional notices immediately following
+ * this sentence.
+ *
+ * This code is released under the libpng license.
+ *
+ * libpng versions 1.2.6, August 15, 2004, through 1.5.13, September 27, 2012, are
+ * Copyright (c) 2004, 2006-2012 Glenn Randers-Pehrson, and are
+ * distributed according to the same disclaimer and license as libpng-1.2.5
+ * with the following individual added to the list of Contributing Authors:
+ *
+ * Cosmin Truta
+ *
+ * libpng versions 1.0.7, July 1, 2000, through 1.2.5, October 3, 2002, are
+ * Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are
+ * distributed according to the same disclaimer and license as libpng-1.0.6
+ * with the following individuals added to the list of Contributing Authors:
+ *
+ * Simon-Pierre Cadieux
+ * Eric S. Raymond
+ * Gilles Vollant
+ *
+ * and with the following additions to the disclaimer:
+ *
+ * There is no warranty against interference with your enjoyment of the
+ * library or against infringement. There is no warranty that our
+ * efforts or the library will fulfill any of your particular purposes
+ * or needs. This library is provided with all faults, and the entire
+ * risk of satisfactory quality, performance, accuracy, and effort is with
+ * the user.
+ *
+ * libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are
+ * Copyright (c) 1998, 1999, 2000 Glenn Randers-Pehrson, and are
+ * distributed according to the same disclaimer and license as libpng-0.96,
+ * with the following individuals added to the list of Contributing Authors:
+ *
+ * Tom Lane
+ * Glenn Randers-Pehrson
+ * Willem van Schaik
+ *
+ * libpng versions 0.89, June 1996, through 0.96, May 1997, are
+ * Copyright (c) 1996, 1997 Andreas Dilger
+ * Distributed according to the same disclaimer and license as libpng-0.88,
+ * with the following individuals added to the list of Contributing Authors:
+ *
+ * John Bowler
+ * Kevin Bracey
+ * Sam Bushell
+ * Magnus Holmgren
+ * Greg Roelofs
+ * Tom Tanner
+ *
+ * libpng versions 0.5, May 1995, through 0.88, January 1996, are
+ * Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
+ *
+ * For the purposes of this copyright and license, "Contributing Authors"
+ * is defined as the following set of individuals:
+ *
+ * Andreas Dilger
+ * Dave Martindale
+ * Guy Eric Schalnat
+ * Paul Schmidt
+ * Tim Wegner
+ *
+ * The PNG Reference Library is supplied "AS IS". The Contributing Authors
+ * and Group 42, Inc. disclaim all warranties, expressed or implied,
+ * including, without limitation, the warranties of merchantability and of
+ * fitness for any purpose. The Contributing Authors and Group 42, Inc.
+ * assume no liability for direct, indirect, incidental, special, exemplary,
+ * or consequential damages, which may result from the use of the PNG
+ * Reference Library, even if advised of the possibility of such damage.
+ *
+ * Permission is hereby granted to use, copy, modify, and distribute this
+ * source code, or portions hereof, for any purpose, without fee, subject
+ * to the following restrictions:
+ *
+ * 1. The origin of this source code must not be misrepresented.
+ *
+ * 2. Altered versions must be plainly marked as such and must not
+ * be misrepresented as being the original source.
+ *
+ * 3. This Copyright notice may not be removed or altered from
+ * any source or altered source distribution.
+ *
+ * The Contributing Authors and Group 42, Inc. specifically permit, without
+ * fee, and encourage the use of this source code as a component to
+ * supporting the PNG file format in commercial products. If you use this
+ * source code in a product, acknowledgment is not required but would be
+ * appreciated.
+ */
+
+/*
+ * A "png_get_copyright" function is available, for convenient use in "about"
+ * boxes and the like:
+ *
+ * printf("%s", png_get_copyright(NULL));
+ *
+ * Also, the PNG logo (in PNG format, of course) is supplied in the
+ * files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).
+ */
+
+/*
+ * Libpng is OSI Certified Open Source Software. OSI Certified is a
+ * certification mark of the Open Source Initiative.
+ */
+
+/*
+ * The contributing authors would like to thank all those who helped
+ * with testing, bug fixes, and patience. This wouldn't have been
+ * possible without all of you.
+ *
+ * Thanks to Frank J. T. Wojcik for helping with the documentation.
+ */
+
+/*
+ * Y2K compliance in libpng:
+ * =========================
+ *
+ * September 27, 2012
+ *
+ * Since the PNG Development group is an ad-hoc body, we can't make
+ * an official declaration.
+ *
+ * This is your unofficial assurance that libpng from version 0.71 and
+ * upward through 1.5.13 are Y2K compliant. It is my belief that
+ * earlier versions were also Y2K compliant.
+ *
+ * Libpng only has two year fields. One is a 2-byte unsigned integer
+ * that will hold years up to 65535. The other holds the date in text
+ * format, and will hold years up to 9999.
+ *
+ * The integer is
+ * "png_uint_16 year" in png_time_struct.
+ *
+ * The string is
+ * "char time_buffer[29]" in png_struct. This will be no
+ * longer used in libpng-1.6.0 and will be removed from libpng-1.7.0.
+ *
+ * There are seven time-related functions:
+ * png.c: png_convert_to_rfc_1123() in png.c
+ * (formerly png_convert_to_rfc_1152() in error)
+ * png_convert_from_struct_tm() in pngwrite.c, called in pngwrite.c
+ * png_convert_from_time_t() in pngwrite.c
+ * png_get_tIME() in pngget.c
+ * png_handle_tIME() in pngrutil.c, called in pngread.c
+ * png_set_tIME() in pngset.c
+ * png_write_tIME() in pngwutil.c, called in pngwrite.c
+ *
+ * All handle dates properly in a Y2K environment. The
+ * png_convert_from_time_t() function calls gmtime() to convert from system
+ * clock time, which returns (year - 1900), which we properly convert to
+ * the full 4-digit year. There is a possibility that applications using
+ * libpng are not passing 4-digit years into the png_convert_to_rfc_1123()
+ * function, or that they are incorrectly passing only a 2-digit year
+ * instead of "year - 1900" into the png_convert_from_struct_tm() function,
+ * but this is not under our control. The libpng documentation has always
+ * stated that it works with 4-digit years, and the APIs have been
+ * documented as such.
+ *
+ * The tIME chunk itself is also Y2K compliant. It uses a 2-byte unsigned
+ * integer to hold the year, and can hold years as large as 65535.
+ *
+ * zlib, upon which libpng depends, is also Y2K compliant. It contains
+ * no date-related code.
+ *
+ * Glenn Randers-Pehrson
+ * libpng maintainer
+ * PNG Development Group
+ */
+
+#ifndef PNG_H
+#define PNG_H
+
+/* This is not the place to learn how to use libpng. The file libpng-manual.txt
+ * describes how to use libpng, and the file example.c summarizes it
+ * with some code on which to build. This file is useful for looking
+ * at the actual function definitions and structure components.
+ *
+ * If you just need to read a PNG file and don't want to read the documentation
+ * skip to the end of this file and read the section entitled 'simplified API'.
+ */
+
+/* Version information for png.h - this should match the version in png.c */
+#define PNG_LIBPNG_VER_STRING "1.5.13"
+#define PNG_HEADER_VERSION_STRING \
+ " libpng version 1.5.13 - September 27, 2012\n"
+
+#define PNG_LIBPNG_VER_SONUM 15
+#define PNG_LIBPNG_VER_DLLNUM 15
+
+/* These should match the first 3 components of PNG_LIBPNG_VER_STRING: */
+#define PNG_LIBPNG_VER_MAJOR 1
+#define PNG_LIBPNG_VER_MINOR 5
+#define PNG_LIBPNG_VER_RELEASE 13
+
+/* This should match the numeric part of the final component of
+ * PNG_LIBPNG_VER_STRING, omitting any leading zero:
+ */
+
+#define PNG_LIBPNG_VER_BUILD 0
+
+/* Release Status */
+#define PNG_LIBPNG_BUILD_ALPHA 1
+#define PNG_LIBPNG_BUILD_BETA 2
+#define PNG_LIBPNG_BUILD_RC 3
+#define PNG_LIBPNG_BUILD_STABLE 4
+#define PNG_LIBPNG_BUILD_RELEASE_STATUS_MASK 7
+
+/* Release-Specific Flags */
+#define PNG_LIBPNG_BUILD_PATCH 8 /* Can be OR'ed with
+ PNG_LIBPNG_BUILD_STABLE only */
+#define PNG_LIBPNG_BUILD_PRIVATE 16 /* Cannot be OR'ed with
+ PNG_LIBPNG_BUILD_SPECIAL */
+#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with
+ PNG_LIBPNG_BUILD_PRIVATE */
+
+#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE
+
+/* Careful here. At one time, Guy wanted to use 082, but that would be octal.
+ * We must not include leading zeros.
+ * Versions 0.7 through 1.0.0 were in the range 0 to 100 here (only
+ * version 1.0.0 was mis-numbered 100 instead of 10000). From
+ * version 1.0.1 it's xxyyzz, where x=major, y=minor, z=release
+ */
+#define PNG_LIBPNG_VER 10513 /* 1.5.13 */
+
+/* Library configuration: these options cannot be changed after
+ * the library has been built.
+ */
+#ifndef PNGLCONF_H
+ /* If pnglibconf.h is missing, you can
+ * copy scripts/pnglibconf.h.prebuilt to pnglibconf.h
+ */
+# include "pnglibconf.h"
+#endif
+
+#ifndef PNG_VERSION_INFO_ONLY
+# ifndef PNG_BUILDING_SYMBOL_TABLE
+ /*
+ * Standard header files (not needed for the version info or while
+ * building symbol table -- see scripts/pnglibconf.dfa)
+ */
+# ifdef PNG_SETJMP_SUPPORTED
+# include <setjmp.h>
+# endif
+
+ /* Need the time information for converting tIME chunks, it
+ * defines struct tm:
+ */
+# ifdef PNG_CONVERT_tIME_SUPPORTED
+ /* "time.h" functions are not supported on all operating systems */
+# include <time.h>
+# endif
+# endif
+
+/* Machine specific configuration. */
+# include "pngconf.h"
+#endif
+
+/*
+ * Added at libpng-1.2.8
+ *
+ * Ref MSDN: Private as priority over Special
+ * VS_FF_PRIVATEBUILD File *was not* built using standard release
+ * procedures. If this value is given, the StringFileInfo block must
+ * contain a PrivateBuild string.
+ *
+ * VS_FF_SPECIALBUILD File *was* built by the original company using
+ * standard release procedures but is a variation of the standard
+ * file of the same version number. If this value is given, the
+ * StringFileInfo block must contain a SpecialBuild string.
+ */
+
+#ifdef PNG_USER_PRIVATEBUILD /* From pnglibconf.h */
+# define PNG_LIBPNG_BUILD_TYPE \
+ (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE)
+#else
+# ifdef PNG_LIBPNG_SPECIALBUILD
+# define PNG_LIBPNG_BUILD_TYPE \
+ (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL)
+# else
+# define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE)
+# endif
+#endif
+
+#ifndef PNG_VERSION_INFO_ONLY
+
+/* Inhibit C++ name-mangling for libpng functions but not for system calls. */
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Version information for C files, stored in png.c. This had better match
+ * the version above.
+ */
+#define png_libpng_ver png_get_header_ver(NULL)
+
+/* This file is arranged in several sections:
+ *
+ * 1. Any configuration options that can be specified by for the application
+ * code when it is built. (Build time configuration is in pnglibconf.h)
+ * 2. Type definitions (base types are defined in pngconf.h), structure
+ * definitions.
+ * 3. Exported library functions.
+ *
+ * The library source code has additional files (principally pngpriv.h) that
+ * allow configuration of the library.
+ */
+/* Section 1: run time configuration
+ * See pnglibconf.h for build time configuration
+ *
+ * Run time configuration allows the application to choose between
+ * implementations of certain arithmetic APIs. The default is set
+ * at build time and recorded in pnglibconf.h, but it is safe to
+ * override these (and only these) settings. Note that this won't
+ * change what the library does, only application code, and the
+ * settings can (and probably should) be made on a per-file basis
+ * by setting the #defines before including png.h
+ *
+ * Use macros to read integers from PNG data or use the exported
+ * functions?
+ * PNG_USE_READ_MACROS: use the macros (see below) Note that
+ * the macros evaluate their argument multiple times.
+ * PNG_NO_USE_READ_MACROS: call the relevant library function.
+ *
+ * Use the alternative algorithm for compositing alpha samples that
+ * does not use division?
+ * PNG_READ_COMPOSITE_NODIV_SUPPORTED: use the 'no division'
+ * algorithm.
+ * PNG_NO_READ_COMPOSITE_NODIV: use the 'division' algorithm.
+ *
+ * How to handle benign errors if PNG_ALLOW_BENIGN_ERRORS is
+ * false?
+ * PNG_ALLOW_BENIGN_ERRORS: map calls to the benign error
+ * APIs to png_warning.
+ * Otherwise the calls are mapped to png_error.
+ */
+
+/* Section 2: type definitions, including structures and compile time
+ * constants.
+ * See pngconf.h for base types that vary by machine/system
+ */
+
+/* This triggers a compiler error in png.c, if png.c and png.h
+ * do not agree upon the version number.
+ */
+typedef char* png_libpng_version_1_5_13;
+
+/* Three color definitions. The order of the red, green, and blue, (and the
+ * exact size) is not important, although the size of the fields need to
+ * be png_byte or png_uint_16 (as defined below).
+ */
+typedef struct png_color_struct
+{
+ png_byte red;
+ png_byte green;
+ png_byte blue;
+} png_color;
+typedef png_color FAR * png_colorp;
+typedef PNG_CONST png_color FAR * png_const_colorp;
+typedef png_color FAR * FAR * png_colorpp;
+
+typedef struct png_color_16_struct
+{
+ png_byte index; /* used for palette files */
+ png_uint_16 red; /* for use in red green blue files */
+ png_uint_16 green;
+ png_uint_16 blue;
+ png_uint_16 gray; /* for use in grayscale files */
+} png_color_16;
+typedef png_color_16 FAR * png_color_16p;
+typedef PNG_CONST png_color_16 FAR * png_const_color_16p;
+typedef png_color_16 FAR * FAR * png_color_16pp;
+
+typedef struct png_color_8_struct
+{
+ png_byte red; /* for use in red green blue files */
+ png_byte green;
+ png_byte blue;
+ png_byte gray; /* for use in grayscale files */
+ png_byte alpha; /* for alpha channel files */
+} png_color_8;
+typedef png_color_8 FAR * png_color_8p;
+typedef PNG_CONST png_color_8 FAR * png_const_color_8p;
+typedef png_color_8 FAR * FAR * png_color_8pp;
+
+/*
+ * The following two structures are used for the in-core representation
+ * of sPLT chunks.
+ */
+typedef struct png_sPLT_entry_struct
+{
+ png_uint_16 red;
+ png_uint_16 green;
+ png_uint_16 blue;
+ png_uint_16 alpha;
+ png_uint_16 frequency;
+} png_sPLT_entry;
+typedef png_sPLT_entry FAR * png_sPLT_entryp;
+typedef PNG_CONST png_sPLT_entry FAR * png_const_sPLT_entryp;
+typedef png_sPLT_entry FAR * FAR * png_sPLT_entrypp;
+
+/* When the depth of the sPLT palette is 8 bits, the color and alpha samples
+ * occupy the LSB of their respective members, and the MSB of each member
+ * is zero-filled. The frequency member always occupies the full 16 bits.
+ */
+
+typedef struct png_sPLT_struct
+{
+ png_charp name; /* palette name */
+ png_byte depth; /* depth of palette samples */
+ png_sPLT_entryp entries; /* palette entries */
+ png_int_32 nentries; /* number of palette entries */
+} png_sPLT_t;
+typedef png_sPLT_t FAR * png_sPLT_tp;
+typedef PNG_CONST png_sPLT_t FAR * png_const_sPLT_tp;
+typedef png_sPLT_t FAR * FAR * png_sPLT_tpp;
+
+#ifdef PNG_TEXT_SUPPORTED
+/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file,
+ * and whether that contents is compressed or not. The "key" field
+ * points to a regular zero-terminated C string. The "text" fields can be a
+ * regular C string, an empty string, or a NULL pointer.
+ * However, the structure returned by png_get_text() will always contain
+ * the "text" field as a regular zero-terminated C string (possibly
+ * empty), never a NULL pointer, so it can be safely used in printf() and
+ * other string-handling functions. Note that the "itxt_length", "lang", and
+ * "lang_key" members of the structure only exist when the library is built
+ * with iTXt chunk support. Prior to libpng-1.4.0 the library was built by
+ * default without iTXt support. Also note that when iTXt *is* supported,
+ * the "lang" and "lang_key" fields contain NULL pointers when the
+ * "compression" field contains * PNG_TEXT_COMPRESSION_NONE or
+ * PNG_TEXT_COMPRESSION_zTXt. Note that the "compression value" is not the
+ * same as what appears in the PNG tEXt/zTXt/iTXt chunk's "compression flag"
+ * which is always 0 or 1, or its "compression method" which is always 0.
+ */
+typedef struct png_text_struct
+{
+ int compression; /* compression value:
+ -1: tEXt, none
+ 0: zTXt, deflate
+ 1: iTXt, none
+ 2: iTXt, deflate */
+ png_charp key; /* keyword, 1-79 character description of "text" */
+ png_charp text; /* comment, may be an empty string (ie "")
+ or a NULL pointer */
+ png_size_t text_length; /* length of the text string */
+ png_size_t itxt_length; /* length of the itxt string */
+ png_charp lang; /* language code, 0-79 characters
+ or a NULL pointer */
+ png_charp lang_key; /* keyword translated UTF-8 string, 0 or more
+ chars or a NULL pointer */
+} png_text;
+typedef png_text FAR * png_textp;
+typedef PNG_CONST png_text FAR * png_const_textp;
+typedef png_text FAR * FAR * png_textpp;
+#endif
+
+/* Supported compression types for text in PNG files (tEXt, and zTXt).
+ * The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */
+#define PNG_TEXT_COMPRESSION_NONE_WR -3
+#define PNG_TEXT_COMPRESSION_zTXt_WR -2
+#define PNG_TEXT_COMPRESSION_NONE -1
+#define PNG_TEXT_COMPRESSION_zTXt 0
+#define PNG_ITXT_COMPRESSION_NONE 1
+#define PNG_ITXT_COMPRESSION_zTXt 2
+#define PNG_TEXT_COMPRESSION_LAST 3 /* Not a valid value */
+
+/* png_time is a way to hold the time in an machine independent way.
+ * Two conversions are provided, both from time_t and struct tm. There
+ * is no portable way to convert to either of these structures, as far
+ * as I know. If you know of a portable way, send it to me. As a side
+ * note - PNG has always been Year 2000 compliant!
+ */
+typedef struct png_time_struct
+{
+ png_uint_16 year; /* full year, as in, 1995 */
+ png_byte month; /* month of year, 1 - 12 */
+ png_byte day; /* day of month, 1 - 31 */
+ png_byte hour; /* hour of day, 0 - 23 */
+ png_byte minute; /* minute of hour, 0 - 59 */
+ png_byte second; /* second of minute, 0 - 60 (for leap seconds) */
+} png_time;
+typedef png_time FAR * png_timep;
+typedef PNG_CONST png_time FAR * png_const_timep;
+typedef png_time FAR * FAR * png_timepp;
+
+#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) || \
+ defined(PNG_HANDLE_AS_UNKNOWN_SUPPORTED)
+/* png_unknown_chunk is a structure to hold queued chunks for which there is
+ * no specific support. The idea is that we can use this to queue
+ * up private chunks for output even though the library doesn't actually
+ * know about their semantics.
+ */
+typedef struct png_unknown_chunk_t
+{
+ png_byte name[5];
+ png_byte *data;
+ png_size_t size;
+
+ /* libpng-using applications should NOT directly modify this byte. */
+ png_byte location; /* mode of operation at read time */
+}
+
+
+png_unknown_chunk;
+typedef png_unknown_chunk FAR * png_unknown_chunkp;
+typedef PNG_CONST png_unknown_chunk FAR * png_const_unknown_chunkp;
+typedef png_unknown_chunk FAR * FAR * png_unknown_chunkpp;
+#endif
+
+/* Values for the unknown chunk location byte */
+
+#define PNG_HAVE_IHDR 0x01
+#define PNG_HAVE_PLTE 0x02
+#define PNG_AFTER_IDAT 0x08
+
+/* The complete definition of png_info has, as of libpng-1.5.0,
+ * been moved into a separate header file that is not accessible to
+ * applications. Read libpng-manual.txt or libpng.3 for more info.
+ */
+typedef struct png_info_def png_info;
+typedef png_info FAR * png_infop;
+typedef PNG_CONST png_info FAR * png_const_infop;
+typedef png_info FAR * FAR * png_infopp;
+
+/* Maximum positive integer used in PNG is (2^31)-1 */
+#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL)
+#define PNG_UINT_32_MAX ((png_uint_32)(-1))
+#define PNG_SIZE_MAX ((png_size_t)(-1))
+
+/* These are constants for fixed point values encoded in the
+ * PNG specification manner (x100000)
+ */
+#define PNG_FP_1 100000
+#define PNG_FP_HALF 50000
+#define PNG_FP_MAX ((png_fixed_point)0x7fffffffL)
+#define PNG_FP_MIN (-PNG_FP_MAX)
+
+/* These describe the color_type field in png_info. */
+/* color type masks */
+#define PNG_COLOR_MASK_PALETTE 1
+#define PNG_COLOR_MASK_COLOR 2
+#define PNG_COLOR_MASK_ALPHA 4
+
+/* color types. Note that not all combinations are legal */
+#define PNG_COLOR_TYPE_GRAY 0
+#define PNG_COLOR_TYPE_PALETTE (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE)
+#define PNG_COLOR_TYPE_RGB (PNG_COLOR_MASK_COLOR)
+#define PNG_COLOR_TYPE_RGB_ALPHA (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA)
+#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA)
+/* aliases */
+#define PNG_COLOR_TYPE_RGBA PNG_COLOR_TYPE_RGB_ALPHA
+#define PNG_COLOR_TYPE_GA PNG_COLOR_TYPE_GRAY_ALPHA
+
+/* This is for compression type. PNG 1.0-1.2 only define the single type. */
+#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */
+#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE
+
+/* This is for filter type. PNG 1.0-1.2 only define the single type. */
+#define PNG_FILTER_TYPE_BASE 0 /* Single row per-byte filtering */
+#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */
+#define PNG_FILTER_TYPE_DEFAULT PNG_FILTER_TYPE_BASE
+
+/* These are for the interlacing type. These values should NOT be changed. */
+#define PNG_INTERLACE_NONE 0 /* Non-interlaced image */
+#define PNG_INTERLACE_ADAM7 1 /* Adam7 interlacing */
+#define PNG_INTERLACE_LAST 2 /* Not a valid value */
+
+/* These are for the oFFs chunk. These values should NOT be changed. */
+#define PNG_OFFSET_PIXEL 0 /* Offset in pixels */
+#define PNG_OFFSET_MICROMETER 1 /* Offset in micrometers (1/10^6 meter) */
+#define PNG_OFFSET_LAST 2 /* Not a valid value */
+
+/* These are for the pCAL chunk. These values should NOT be changed. */
+#define PNG_EQUATION_LINEAR 0 /* Linear transformation */
+#define PNG_EQUATION_BASE_E 1 /* Exponential base e transform */
+#define PNG_EQUATION_ARBITRARY 2 /* Arbitrary base exponential transform */
+#define PNG_EQUATION_HYPERBOLIC 3 /* Hyperbolic sine transformation */
+#define PNG_EQUATION_LAST 4 /* Not a valid value */
+
+/* These are for the sCAL chunk. These values should NOT be changed. */
+#define PNG_SCALE_UNKNOWN 0 /* unknown unit (image scale) */
+#define PNG_SCALE_METER 1 /* meters per pixel */
+#define PNG_SCALE_RADIAN 2 /* radians per pixel */
+#define PNG_SCALE_LAST 3 /* Not a valid value */
+
+/* These are for the pHYs chunk. These values should NOT be changed. */
+#define PNG_RESOLUTION_UNKNOWN 0 /* pixels/unknown unit (aspect ratio) */
+#define PNG_RESOLUTION_METER 1 /* pixels/meter */
+#define PNG_RESOLUTION_LAST 2 /* Not a valid value */
+
+/* These are for the sRGB chunk. These values should NOT be changed. */
+#define PNG_sRGB_INTENT_PERCEPTUAL 0
+#define PNG_sRGB_INTENT_RELATIVE 1
+#define PNG_sRGB_INTENT_SATURATION 2
+#define PNG_sRGB_INTENT_ABSOLUTE 3
+#define PNG_sRGB_INTENT_LAST 4 /* Not a valid value */
+
+/* This is for text chunks */
+#define PNG_KEYWORD_MAX_LENGTH 79
+
+/* Maximum number of entries in PLTE/sPLT/tRNS arrays */
+#define PNG_MAX_PALETTE_LENGTH 256
+
+/* These determine if an ancillary chunk's data has been successfully read
+ * from the PNG header, or if the application has filled in the corresponding
+ * data in the info_struct to be written into the output file. The values
+ * of the PNG_INFO_<chunk> defines should NOT be changed.
+ */
+#define PNG_INFO_gAMA 0x0001
+#define PNG_INFO_sBIT 0x0002
+#define PNG_INFO_cHRM 0x0004
+#define PNG_INFO_PLTE 0x0008
+#define PNG_INFO_tRNS 0x0010
+#define PNG_INFO_bKGD 0x0020
+#define PNG_INFO_hIST 0x0040
+#define PNG_INFO_pHYs 0x0080
+#define PNG_INFO_oFFs 0x0100
+#define PNG_INFO_tIME 0x0200
+#define PNG_INFO_pCAL 0x0400
+#define PNG_INFO_sRGB 0x0800 /* GR-P, 0.96a */
+#define PNG_INFO_iCCP 0x1000 /* ESR, 1.0.6 */
+#define PNG_INFO_sPLT 0x2000 /* ESR, 1.0.6 */
+#define PNG_INFO_sCAL 0x4000 /* ESR, 1.0.6 */
+#define PNG_INFO_IDAT 0x8000 /* ESR, 1.0.6 */
+
+/* This is used for the transformation routines, as some of them
+ * change these values for the row. It also should enable using
+ * the routines for other purposes.
+ */
+typedef struct png_row_info_struct
+{
+ png_uint_32 width; /* width of row */
+ png_size_t rowbytes; /* number of bytes in row */
+ png_byte color_type; /* color type of row */
+ png_byte bit_depth; /* bit depth of row */
+ png_byte channels; /* number of channels (1, 2, 3, or 4) */
+ png_byte pixel_depth; /* bits per pixel (depth * channels) */
+} png_row_info;
+
+typedef png_row_info FAR * png_row_infop;
+typedef png_row_info FAR * FAR * png_row_infopp;
+
+/* The complete definition of png_struct has, as of libpng-1.5.0,
+ * been moved into a separate header file that is not accessible to
+ * applications. Read libpng-manual.txt or libpng.3 for more info.
+ */
+typedef struct png_struct_def png_struct;
+typedef PNG_CONST png_struct FAR * png_const_structp;
+typedef png_struct FAR * png_structp;
+
+/* These are the function types for the I/O functions and for the functions
+ * that allow the user to override the default I/O functions with his or her
+ * own. The png_error_ptr type should match that of user-supplied warning
+ * and error functions, while the png_rw_ptr type should match that of the
+ * user read/write data functions. Note that the 'write' function must not
+ * modify the buffer it is passed. The 'read' function, on the other hand, is
+ * expected to return the read data in the buffer.
+ */
+typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp));
+typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, png_size_t));
+typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp));
+typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32,
+ int));
+typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32,
+ int));
+
+#ifdef PNG_PROGRESSIVE_READ_SUPPORTED
+typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop));
+typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop));
+
+/* The following callback receives png_uint_32 row_number, int pass for the
+ * png_bytep data of the row. When transforming an interlaced image the
+ * row number is the row number within the sub-image of the interlace pass, so
+ * the value will increase to the height of the sub-image (not the full image)
+ * then reset to 0 for the next pass.
+ *
+ * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to
+ * find the output pixel (x,y) given an interlaced sub-image pixel
+ * (row,col,pass). (See below for these macros.)
+ */
+typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep,
+ png_uint_32, int));
+#endif
+
+#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \
+ defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED)
+typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop,
+ png_bytep));
+#endif
+
+#ifdef PNG_USER_CHUNKS_SUPPORTED
+typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp,
+ png_unknown_chunkp));
+#endif
+#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED
+typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp));
+#endif
+
+#ifdef PNG_SETJMP_SUPPORTED
+/* This must match the function definition in <setjmp.h>, and the application
+ * must include this before png.h to obtain the definition of jmp_buf. The
+ * function is required to be PNG_NORETURN, but this is not checked. If the
+ * function does return the application will crash via an abort() or similar
+ * system level call.
+ *
+ * If you get a warning here while building the library you may need to make
+ * changes to ensure that pnglibconf.h records the calling convention used by
+ * your compiler. This may be very difficult - try using a different compiler
+ * to build the library!
+ */
+PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), PNGARG((jmp_buf, int)), typedef);
+#endif
+
+/* Transform masks for the high-level interface */
+#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */
+#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */
+#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */
+#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */
+#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */
+#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */
+#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */
+#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */
+#define PNG_TRANSFORM_BGR 0x0080 /* read and write */
+#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */
+#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */
+#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */
+#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */
+/* Added to libpng-1.2.34 */
+#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER
+#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */
+/* Added to libpng-1.4.0 */
+#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */
+/* Added to libpng-1.5.4 */
+#define PNG_TRANSFORM_EXPAND_16 0x4000 /* read only */
+#define PNG_TRANSFORM_SCALE_16 0x8000 /* read only */
+
+/* Flags for MNG supported features */
+#define PNG_FLAG_MNG_EMPTY_PLTE 0x01
+#define PNG_FLAG_MNG_FILTER_64 0x04
+#define PNG_ALL_MNG_FEATURES 0x05
+
+/* NOTE: prior to 1.5 these functions had no 'API' style declaration,
+ * this allowed the zlib default functions to be used on Windows
+ * platforms. In 1.5 the zlib default malloc (which just calls malloc and
+ * ignores the first argument) should be completely compatible with the
+ * following.
+ */
+typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp,
+ png_alloc_size_t));
+typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp));
+
+typedef png_struct FAR * FAR * png_structpp;
+
+/* Section 3: exported functions
+ * Here are the function definitions most commonly used. This is not
+ * the place to find out how to use libpng. See libpng-manual.txt for the
+ * full explanation, see example.c for the summary. This just provides
+ * a simple one line description of the use of each function.
+ *
+ * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in
+ * pngconf.h and in the *.dfn files in the scripts directory.
+ *
+ * PNG_EXPORT(ordinal, type, name, (args));
+ *
+ * ordinal: ordinal that is used while building
+ * *.def files. The ordinal value is only
+ * relevant when preprocessing png.h with
+ * the *.dfn files for building symbol table
+ * entries, and are removed by pngconf.h.
+ * type: return type of the function
+ * name: function name
+ * args: function arguments, with types
+ *
+ * When we wish to append attributes to a function prototype we use
+ * the PNG_EXPORTA() macro instead.
+ *
+ * PNG_EXPORTA(ordinal, type, name, (args), attributes);
+ *
+ * ordinal, type, name, and args: same as in PNG_EXPORT().
+ * attributes: function attributes
+ */
+
+/* Returns the version number of the library */
+PNG_EXPORT(1, png_uint_32, png_access_version_number, (void));
+
+/* Tell lib we have already handled the first <num_bytes> magic bytes.
+ * Handling more than 8 bytes from the beginning of the file is an error.
+ */
+PNG_EXPORT(2, void, png_set_sig_bytes, (png_structp png_ptr, int num_bytes));
+
+/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a
+ * PNG file. Returns zero if the supplied bytes match the 8-byte PNG
+ * signature, and non-zero otherwise. Having num_to_check == 0 or
+ * start > 7 will always fail (ie return non-zero).
+ */
+PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, png_size_t start,
+ png_size_t num_to_check));
+
+/* Simple signature checking function. This is the same as calling
+ * png_check_sig(sig, n) := !png_sig_cmp(sig, 0, n).
+ */
+#define png_check_sig(sig, n) !png_sig_cmp((sig), 0, (n))
+
+/* Allocate and initialize png_ptr struct for reading, and any other memory. */
+PNG_EXPORTA(4, png_structp, png_create_read_struct,
+ (png_const_charp user_png_ver, png_voidp error_ptr,
+ png_error_ptr error_fn, png_error_ptr warn_fn),
+ PNG_ALLOCATED);
+
+/* Allocate and initialize png_ptr struct for writing, and any other memory */
+PNG_EXPORTA(5, png_structp, png_create_write_struct,
+ (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn,
+ png_error_ptr warn_fn),
+ PNG_ALLOCATED);
+
+PNG_EXPORT(6, png_size_t, png_get_compression_buffer_size,
+ (png_const_structp png_ptr));
+
+PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structp png_ptr,
+ png_size_t size));
+
+/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp
+ * match up.
+ */
+#ifdef PNG_SETJMP_SUPPORTED
+/* This function returns the jmp_buf built in to *png_ptr. It must be
+ * supplied with an appropriate 'longjmp' function to use on that jmp_buf
+ * unless the default error function is overridden in which case NULL is
+ * acceptable. The size of the jmp_buf is checked against the actual size
+ * allocated by the library - the call will return NULL on a mismatch
+ * indicating an ABI mismatch.
+ */
+PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structp png_ptr,
+ png_longjmp_ptr longjmp_fn, size_t jmp_buf_size));
+# define png_jmpbuf(png_ptr) \
+ (*png_set_longjmp_fn((png_ptr), longjmp, sizeof (jmp_buf)))
+#else
+# define png_jmpbuf(png_ptr) \
+ (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP)
+#endif
+/* This function should be used by libpng applications in place of
+ * longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it
+ * will use it; otherwise it will call PNG_ABORT(). This function was
+ * added in libpng-1.5.0.
+ */
+PNG_EXPORTA(9, void, png_longjmp, (png_structp png_ptr, int val),
+ PNG_NORETURN);
+
+#ifdef PNG_READ_SUPPORTED
+/* Reset the compression stream */
+PNG_EXPORT(10, int, png_reset_zstream, (png_structp png_ptr));
+#endif
+
+/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */
+#ifdef PNG_USER_MEM_SUPPORTED
+PNG_EXPORTA(11, png_structp, png_create_read_struct_2,
+ (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn,
+ png_error_ptr warn_fn,
+ png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn),
+ PNG_ALLOCATED);
+PNG_EXPORTA(12, png_structp, png_create_write_struct_2,
+ (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn,
+ png_error_ptr warn_fn,
+ png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn),
+ PNG_ALLOCATED);
+#endif
+
+/* Write the PNG file signature. */
+PNG_EXPORT(13, void, png_write_sig, (png_structp png_ptr));
+
+/* Write a PNG chunk - size, type, (optional) data, CRC. */
+PNG_EXPORT(14, void, png_write_chunk, (png_structp png_ptr, png_const_bytep
+ chunk_name, png_const_bytep data, png_size_t length));
+
+/* Write the start of a PNG chunk - length and chunk name. */
+PNG_EXPORT(15, void, png_write_chunk_start, (png_structp png_ptr,
+ png_const_bytep chunk_name, png_uint_32 length));
+
+/* Write the data of a PNG chunk started with png_write_chunk_start(). */
+PNG_EXPORT(16, void, png_write_chunk_data, (png_structp png_ptr,
+ png_const_bytep data, png_size_t length));
+
+/* Finish a chunk started with png_write_chunk_start() (includes CRC). */
+PNG_EXPORT(17, void, png_write_chunk_end, (png_structp png_ptr));
+
+/* Allocate and initialize the info structure */
+PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_structp png_ptr),
+ PNG_ALLOCATED);
+
+PNG_EXPORT(19, void, png_info_init_3, (png_infopp info_ptr,
+ png_size_t png_info_struct_size));
+
+/* Writes all the PNG information before the image. */
+PNG_EXPORT(20, void, png_write_info_before_PLTE,
+ (png_structp png_ptr, png_infop info_ptr));
+PNG_EXPORT(21, void, png_write_info,
+ (png_structp png_ptr, png_infop info_ptr));
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read the information before the actual image data. */
+PNG_EXPORT(22, void, png_read_info,
+ (png_structp png_ptr, png_infop info_ptr));
+#endif
+
+#ifdef PNG_TIME_RFC1123_SUPPORTED
+PNG_EXPORT(23, png_const_charp, png_convert_to_rfc1123,
+ (png_structp png_ptr,
+ png_const_timep ptime));
+#endif
+
+#ifdef PNG_CONVERT_tIME_SUPPORTED
+/* Convert from a struct tm to png_time */
+PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime,
+ PNG_CONST struct tm FAR * ttime));
+
+/* Convert from time_t to png_time. Uses gmtime() */
+PNG_EXPORT(25, void, png_convert_from_time_t,
+ (png_timep ptime, time_t ttime));
+#endif /* PNG_CONVERT_tIME_SUPPORTED */
+
+#ifdef PNG_READ_EXPAND_SUPPORTED
+/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */
+PNG_EXPORT(26, void, png_set_expand, (png_structp png_ptr));
+PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structp png_ptr));
+PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structp png_ptr));
+PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_EXPAND_16_SUPPORTED
+/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion
+ * of a tRNS chunk if present.
+ */
+PNG_EXPORT(221, void, png_set_expand_16, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED)
+/* Use blue, green, red order for pixels. */
+PNG_EXPORT(30, void, png_set_bgr, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED
+/* Expand the grayscale to 24-bit RGB if necessary. */
+PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED
+/* Reduce RGB to grayscale. */
+#define PNG_ERROR_ACTION_NONE 1
+#define PNG_ERROR_ACTION_WARN 2
+#define PNG_ERROR_ACTION_ERROR 3
+#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/
+
+PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structp png_ptr,
+ int error_action, double red, double green))
+PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structp png_ptr,
+ int error_action, png_fixed_point red, png_fixed_point green))
+
+PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structp
+ png_ptr));
+#endif
+
+#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED
+PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth,
+ png_colorp palette));
+#endif
+
+#ifdef PNG_READ_ALPHA_MODE_SUPPORTED
+/* How the alpha channel is interpreted - this affects how the color channels of
+ * a PNG file are returned when an alpha channel, or tRNS chunk in a palette
+ * file, is present.
+ *
+ * This has no effect on the way pixels are written into a PNG output
+ * datastream. The color samples in a PNG datastream are never premultiplied
+ * with the alpha samples.
+ *
+ * The default is to return data according to the PNG specification: the alpha
+ * channel is a linear measure of the contribution of the pixel to the
+ * corresponding composited pixel. The gamma encoded color channels must be
+ * scaled according to the contribution and to do this it is necessary to undo
+ * the encoding, scale the color values, perform the composition and reencode
+ * the values. This is the 'PNG' mode.
+ *
+ * The alternative is to 'associate' the alpha with the color information by
+ * storing color channel values that have been scaled by the alpha. The
+ * advantage is that the color channels can be resampled (the image can be
+ * scaled) in this form. The disadvantage is that normal practice is to store
+ * linear, not (gamma) encoded, values and this requires 16-bit channels for
+ * still images rather than the 8-bit channels that are just about sufficient if
+ * gamma encoding is used. In addition all non-transparent pixel values,
+ * including completely opaque ones, must be gamma encoded to produce the final
+ * image. This is the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' mode (the
+ * latter being the two common names for associated alpha color channels.)
+ *
+ * Since it is not necessary to perform arithmetic on opaque color values so
+ * long as they are not to be resampled and are in the final color space it is
+ * possible to optimize the handling of alpha by storing the opaque pixels in
+ * the PNG format (adjusted for the output color space) while storing partially
+ * opaque pixels in the standard, linear, format. The accuracy required for
+ * standard alpha composition is relatively low, because the pixels are
+ * isolated, therefore typically the accuracy loss in storing 8-bit linear
+ * values is acceptable. (This is not true if the alpha channel is used to
+ * simulate transparency over large areas - use 16 bits or the PNG mode in
+ * this case!) This is the 'OPTIMIZED' mode. For this mode a pixel is
+ * treated as opaque only if the alpha value is equal to the maximum value.
+ *
+ * The final choice is to gamma encode the alpha channel as well. This is
+ * broken because, in practice, no implementation that uses this choice
+ * correctly undoes the encoding before handling alpha composition. Use this
+ * choice only if other serious errors in the software or hardware you use
+ * mandate it; the typical serious error is for dark halos to appear around
+ * opaque areas of the composited PNG image because of arithmetic overflow.
+ *
+ * The API function png_set_alpha_mode specifies which of these choices to use
+ * with an enumerated 'mode' value and the gamma of the required output:
+ */
+#define PNG_ALPHA_PNG 0 /* according to the PNG standard */
+#define PNG_ALPHA_STANDARD 1 /* according to Porter/Duff */
+#define PNG_ALPHA_ASSOCIATED 1 /* as above; this is the normal practice */
+#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */
+#define PNG_ALPHA_OPTIMIZED 2 /* 'PNG' for opaque pixels, else 'STANDARD' */
+#define PNG_ALPHA_BROKEN 3 /* the alpha channel is gamma encoded */
+
+PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structp png_ptr, int mode,
+ double output_gamma))
+PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structp png_ptr,
+ int mode, png_fixed_point output_gamma))
+#endif
+
+#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED)
+/* The output_gamma value is a screen gamma in libpng terminology: it expresses
+ * how to decode the output values, not how they are encoded. The values used
+ * correspond to the normal numbers used to describe the overall gamma of a
+ * computer display system; for example 2.2 for an sRGB conformant system. The
+ * values are scaled by 100000 in the _fixed version of the API (so 220000 for
+ * sRGB.)
+ *
+ * The inverse of the value is always used to provide a default for the PNG file
+ * encoding if it has no gAMA chunk and if png_set_gamma() has not been called
+ * to override the PNG gamma information.
+ *
+ * When the ALPHA_OPTIMIZED mode is selected the output gamma is used to encode
+ * opaque pixels however pixels with lower alpha values are not encoded,
+ * regardless of the output gamma setting.
+ *
+ * When the standard Porter Duff handling is requested with mode 1 the output
+ * encoding is set to be linear and the output_gamma value is only relevant
+ * as a default for input data that has no gamma information. The linear output
+ * encoding will be overridden if png_set_gamma() is called - the results may be
+ * highly unexpected!
+ *
+ * The following numbers are derived from the sRGB standard and the research
+ * behind it. sRGB is defined to be approximated by a PNG gAMA chunk value of
+ * 0.45455 (1/2.2) for PNG. The value implicitly includes any viewing
+ * correction required to take account of any differences in the color
+ * environment of the original scene and the intended display environment; the
+ * value expresses how to *decode* the image for display, not how the original
+ * data was *encoded*.
+ *
+ * sRGB provides a peg for the PNG standard by defining a viewing environment.
+ * sRGB itself, and earlier TV standards, actually use a more complex transform
+ * (a linear portion then a gamma 2.4 power law) than PNG can express. (PNG is
+ * limited to simple power laws.) By saying that an image for direct display on
+ * an sRGB conformant system should be stored with a gAMA chunk value of 45455
+ * (11.3.3.2 and 11.3.3.5 of the ISO PNG specification) the PNG specification
+ * makes it possible to derive values for other display systems and
+ * environments.
+ *
+ * The Mac value is deduced from the sRGB based on an assumption that the actual
+ * extra viewing correction used in early Mac display systems was implemented as
+ * a power 1.45 lookup table.
+ *
+ * Any system where a programmable lookup table is used or where the behavior of
+ * the final display device characteristics can be changed requires system
+ * specific code to obtain the current characteristic. However this can be
+ * difficult and most PNG gamma correction only requires an approximate value.
+ *
+ * By default, if png_set_alpha_mode() is not called, libpng assumes that all
+ * values are unencoded, linear, values and that the output device also has a
+ * linear characteristic. This is only very rarely correct - it is invariably
+ * better to call png_set_alpha_mode() with PNG_DEFAULT_sRGB than rely on the
+ * default if you don't know what the right answer is!
+ *
+ * The special value PNG_GAMMA_MAC_18 indicates an older Mac system (pre Mac OS
+ * 10.6) which used a correction table to implement a somewhat lower gamma on an
+ * otherwise sRGB system.
+ *
+ * Both these values are reserved (not simple gamma values) in order to allow
+ * more precise correction internally in the future.
+ *
+ * NOTE: the following values can be passed to either the fixed or floating
+ * point APIs, but the floating point API will also accept floating point
+ * values.
+ */
+#define PNG_DEFAULT_sRGB -1 /* sRGB gamma and color space */
+#define PNG_GAMMA_MAC_18 -2 /* Old Mac '1.8' gamma and color space */
+#define PNG_GAMMA_sRGB 220000 /* Television standards--matches sRGB gamma */
+#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */
+#endif
+
+/* The following are examples of calls to png_set_alpha_mode to achieve the
+ * required overall gamma correction and, where necessary, alpha
+ * premultiplication.
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB);
+ * This is the default libpng handling of the alpha channel - it is not
+ * pre-multiplied into the color components. In addition the call states
+ * that the output is for a sRGB system and causes all PNG files without gAMA
+ * chunks to be assumed to be encoded using sRGB.
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC);
+ * In this case the output is assumed to be something like an sRGB conformant
+ * display preceeded by a power-law lookup table of power 1.45. This is how
+ * early Mac systems behaved.
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR);
+ * This is the classic Jim Blinn approach and will work in academic
+ * environments where everything is done by the book. It has the shortcoming
+ * of assuming that input PNG data with no gamma information is linear - this
+ * is unlikely to be correct unless the PNG files where generated locally.
+ * Most of the time the output precision will be so low as to show
+ * significant banding in dark areas of the image.
+ *
+ * png_set_expand_16(pp);
+ * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB);
+ * This is a somewhat more realistic Jim Blinn inspired approach. PNG files
+ * are assumed to have the sRGB encoding if not marked with a gamma value and
+ * the output is always 16 bits per component. This permits accurate scaling
+ * and processing of the data. If you know that your input PNG files were
+ * generated locally you might need to replace PNG_DEFAULT_sRGB with the
+ * correct value for your system.
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB);
+ * If you just need to composite the PNG image onto an existing background
+ * and if you control the code that does this you can use the optimization
+ * setting. In this case you just copy completely opaque pixels to the
+ * output. For pixels that are not completely transparent (you just skip
+ * those) you do the composition math using png_composite or png_composite_16
+ * below then encode the resultant 8-bit or 16-bit values to match the output
+ * encoding.
+ *
+ * Other cases
+ * If neither the PNG nor the standard linear encoding work for you because
+ * of the software or hardware you use then you have a big problem. The PNG
+ * case will probably result in halos around the image. The linear encoding
+ * will probably result in a washed out, too bright, image (it's actually too
+ * contrasty.) Try the ALPHA_OPTIMIZED mode above - this will probably
+ * substantially reduce the halos. Alternatively try:
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB);
+ * This option will also reduce the halos, but there will be slight dark
+ * halos round the opaque parts of the image where the background is light.
+ * In the OPTIMIZED mode the halos will be light halos where the background
+ * is dark. Take your pick - the halos are unavoidable unless you can get
+ * your hardware/software fixed! (The OPTIMIZED approach is slightly
+ * faster.)
+ *
+ * When the default gamma of PNG files doesn't match the output gamma.
+ * If you have PNG files with no gamma information png_set_alpha_mode allows
+ * you to provide a default gamma, but it also sets the ouput gamma to the
+ * matching value. If you know your PNG files have a gamma that doesn't
+ * match the output you can take advantage of the fact that
+ * png_set_alpha_mode always sets the output gamma but only sets the PNG
+ * default if it is not already set:
+ *
+ * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB);
+ * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC);
+ * The first call sets both the default and the output gamma values, the
+ * second call overrides the output gamma without changing the default. This
+ * is easier than achieving the same effect with png_set_gamma. You must use
+ * PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will
+ * fire if more than one call to png_set_alpha_mode and png_set_background is
+ * made in the same read operation, however multiple calls with PNG_ALPHA_PNG
+ * are ignored.
+ */
+
+#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED
+PNG_EXPORT(36, void, png_set_strip_alpha, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \
+ defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED)
+PNG_EXPORT(37, void, png_set_swap_alpha, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \
+ defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED)
+PNG_EXPORT(38, void, png_set_invert_alpha, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED)
+/* Add a filler byte to 8-bit Gray or 24-bit RGB images. */
+PNG_EXPORT(39, void, png_set_filler, (png_structp png_ptr, png_uint_32 filler,
+ int flags));
+/* The values of the PNG_FILLER_ defines should NOT be changed */
+# define PNG_FILLER_BEFORE 0
+# define PNG_FILLER_AFTER 1
+/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */
+PNG_EXPORT(40, void, png_set_add_alpha,
+ (png_structp png_ptr, png_uint_32 filler,
+ int flags));
+#endif /* PNG_READ_FILLER_SUPPORTED || PNG_WRITE_FILLER_SUPPORTED */
+
+#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED)
+/* Swap bytes in 16-bit depth files. */
+PNG_EXPORT(41, void, png_set_swap, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED)
+/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */
+PNG_EXPORT(42, void, png_set_packing, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \
+ defined(PNG_WRITE_PACKSWAP_SUPPORTED)
+/* Swap packing order of pixels in bytes. */
+PNG_EXPORT(43, void, png_set_packswap, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED)
+/* Converts files to legal bit depths. */
+PNG_EXPORT(44, void, png_set_shift, (png_structp png_ptr, png_const_color_8p
+ true_bits));
+#endif
+
+#if defined(PNG_READ_INTERLACING_SUPPORTED) || \
+ defined(PNG_WRITE_INTERLACING_SUPPORTED)
+/* Have the code handle the interlacing. Returns the number of passes.
+ * MUST be called before png_read_update_info or png_start_read_image,
+ * otherwise it will not have the desired effect. Note that it is still
+ * necessary to call png_read_row or png_read_rows png_get_image_height
+ * times for each pass.
+*/
+PNG_EXPORT(45, int, png_set_interlace_handling, (png_structp png_ptr));
+#endif
+
+#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED)
+/* Invert monochrome files */
+PNG_EXPORT(46, void, png_set_invert_mono, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_BACKGROUND_SUPPORTED
+/* Handle alpha and tRNS by replacing with a background color. Prior to
+ * libpng-1.5.4 this API must not be called before the PNG file header has been
+ * read. Doing so will result in unexpected behavior and possible warnings or
+ * errors if the PNG file contains a bKGD chunk.
+ */
+PNG_FP_EXPORT(47, void, png_set_background, (png_structp png_ptr,
+ png_const_color_16p background_color, int background_gamma_code,
+ int need_expand, double background_gamma))
+PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structp png_ptr,
+ png_const_color_16p background_color, int background_gamma_code,
+ int need_expand, png_fixed_point background_gamma))
+#endif
+#ifdef PNG_READ_BACKGROUND_SUPPORTED
+# define PNG_BACKGROUND_GAMMA_UNKNOWN 0
+# define PNG_BACKGROUND_GAMMA_SCREEN 1
+# define PNG_BACKGROUND_GAMMA_FILE 2
+# define PNG_BACKGROUND_GAMMA_UNIQUE 3
+#endif
+
+#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED
+/* Scale a 16-bit depth file down to 8-bit, accurately. */
+PNG_EXPORT(229, void, png_set_scale_16, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED
+#define PNG_READ_16_TO_8 SUPPORTED /* Name prior to 1.5.4 */
+/* Strip the second byte of information from a 16-bit depth file. */
+PNG_EXPORT(48, void, png_set_strip_16, (png_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_QUANTIZE_SUPPORTED
+/* Turn on quantizing, and reduce the palette to the number of colors
+ * available.
+ */
+PNG_EXPORT(49, void, png_set_quantize,
+ (png_structp png_ptr, png_colorp palette,
+ int num_palette, int maximum_colors, png_const_uint_16p histogram,
+ int full_quantize));
+#endif
+
+#ifdef PNG_READ_GAMMA_SUPPORTED
+/* The threshold on gamma processing is configurable but hard-wired into the
+ * library. The following is the floating point variant.
+ */
+#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001)
+
+/* Handle gamma correction. Screen_gamma=(display_exponent).
+ * NOTE: this API simply sets the screen and file gamma values. It will
+ * therefore override the value for gamma in a PNG file if it is called after
+ * the file header has been read - use with care - call before reading the PNG
+ * file for best results!
+ *
+ * These routines accept the same gamma values as png_set_alpha_mode (described
+ * above). The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either
+ * API (floating point or fixed.) Notice, however, that the 'file_gamma' value
+ * is the inverse of a 'screen gamma' value.
+ */
+PNG_FP_EXPORT(50, void, png_set_gamma,
+ (png_structp png_ptr, double screen_gamma,
+ double override_file_gamma))
+PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structp png_ptr,
+ png_fixed_point screen_gamma, png_fixed_point override_file_gamma))
+#endif
+
+#ifdef PNG_WRITE_FLUSH_SUPPORTED
+/* Set how many lines between output flushes - 0 for no flushing */
+PNG_EXPORT(51, void, png_set_flush, (png_structp png_ptr, int nrows));
+/* Flush the current PNG output buffer */
+PNG_EXPORT(52, void, png_write_flush, (png_structp png_ptr));
+#endif
+
+/* Optional update palette with requested transformations */
+PNG_EXPORT(53, void, png_start_read_image, (png_structp png_ptr));
+
+/* Optional call to update the users info structure */
+PNG_EXPORT(54, void, png_read_update_info,
+ (png_structp png_ptr, png_infop info_ptr));
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read one or more rows of image data. */
+PNG_EXPORT(55, void, png_read_rows, (png_structp png_ptr, png_bytepp row,
+ png_bytepp display_row, png_uint_32 num_rows));
+#endif
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read a row of data. */
+PNG_EXPORT(56, void, png_read_row, (png_structp png_ptr, png_bytep row,
+ png_bytep display_row));
+#endif
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read the whole image into memory at once. */
+PNG_EXPORT(57, void, png_read_image, (png_structp png_ptr, png_bytepp image));
+#endif
+
+/* Write a row of image data */
+PNG_EXPORT(58, void, png_write_row,
+ (png_structp png_ptr, png_const_bytep row));
+
+/* Write a few rows of image data: (*row) is not written; however, the type
+ * is declared as writeable to maintain compatibility with previous versions
+ * of libpng and to allow the 'display_row' array from read_rows to be passed
+ * unchanged to write_rows.
+ */
+PNG_EXPORT(59, void, png_write_rows, (png_structp png_ptr, png_bytepp row,
+ png_uint_32 num_rows));
+
+/* Write the image data */
+PNG_EXPORT(60, void, png_write_image,
+ (png_structp png_ptr, png_bytepp image));
+
+/* Write the end of the PNG file. */
+PNG_EXPORT(61, void, png_write_end,
+ (png_structp png_ptr, png_infop info_ptr));
+
+#ifdef PNG_SEQUENTIAL_READ_SUPPORTED
+/* Read the end of the PNG file. */
+PNG_EXPORT(62, void, png_read_end, (png_structp png_ptr, png_infop info_ptr));
+#endif
+
+/* Free any memory associated with the png_info_struct */
+PNG_EXPORT(63, void, png_destroy_info_struct, (png_structp png_ptr,
+ png_infopp info_ptr_ptr));
+
+/* Free any memory associated with the png_struct and the png_info_structs */
+PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr,
+ png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr));
+
+/* Free any memory associated with the png_struct and the png_info_structs */
+PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr,
+ png_infopp info_ptr_ptr));
+
+/* Set the libpng method of handling chunk CRC errors */
+PNG_EXPORT(66, void, png_set_crc_action,
+ (png_structp png_ptr, int crit_action, int ancil_action));
+
+/* Values for png_set_crc_action() say how to handle CRC errors in
+ * ancillary and critical chunks, and whether to use the data contained
+ * therein. Note that it is impossible to "discard" data in a critical
+ * chunk. For versions prior to 0.90, the action was always error/quit,
+ * whereas in version 0.90 and later, the action for CRC errors in ancillary
+ * chunks is warn/discard. These values should NOT be changed.
+ *
+ * value action:critical action:ancillary
+ */
+#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */
+#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */
+#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */
+#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */
+#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */
+#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */
+
+/* These functions give the user control over the scan-line filtering in
+ * libpng and the compression methods used by zlib. These functions are
+ * mainly useful for testing, as the defaults should work with most users.
+ * Those users who are tight on memory or want faster performance at the
+ * expense of compression can modify them. See the compression library
+ * header file (zlib.h) for an explination of the compression functions.
+ */
+
+/* Set the filtering method(s) used by libpng. Currently, the only valid
+ * value for "method" is 0.
+ */
+PNG_EXPORT(67, void, png_set_filter,
+ (png_structp png_ptr, int method, int filters));
+
+/* Flags for png_set_filter() to say which filters to use. The flags
+ * are chosen so that they don't conflict with real filter types
+ * below, in case they are supplied instead of the #defined constants.
+ * These values should NOT be changed.
+ */
+#define PNG_NO_FILTERS 0x00
+#define PNG_FILTER_NONE 0x08
+#define PNG_FILTER_SUB 0x10
+#define PNG_FILTER_UP 0x20
+#define PNG_FILTER_AVG 0x40
+#define PNG_FILTER_PAETH 0x80
+#define PNG_ALL_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP | \
+ PNG_FILTER_AVG | PNG_FILTER_PAETH)
+
+/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now.
+ * These defines should NOT be changed.
+ */
+#define PNG_FILTER_VALUE_NONE 0
+#define PNG_FILTER_VALUE_SUB 1
+#define PNG_FILTER_VALUE_UP 2
+#define PNG_FILTER_VALUE_AVG 3
+#define PNG_FILTER_VALUE_PAETH 4
+#define PNG_FILTER_VALUE_LAST 5
+
+#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* EXPERIMENTAL */
+/* The "heuristic_method" is given by one of the PNG_FILTER_HEURISTIC_
+ * defines, either the default (minimum-sum-of-absolute-differences), or
+ * the experimental method (weighted-minimum-sum-of-absolute-differences).
+ *
+ * Weights are factors >= 1.0, indicating how important it is to keep the
+ * filter type consistent between rows. Larger numbers mean the current
+ * filter is that many times as likely to be the same as the "num_weights"
+ * previous filters. This is cumulative for each previous row with a weight.
+ * There needs to be "num_weights" values in "filter_weights", or it can be
+ * NULL if the weights aren't being specified. Weights have no influence on
+ * the selection of the first row filter. Well chosen weights can (in theory)
+ * improve the compression for a given image.
+ *
+ * Costs are factors >= 1.0 indicating the relative decoding costs of a
+ * filter type. Higher costs indicate more decoding expense, and are
+ * therefore less likely to be selected over a filter with lower computational
+ * costs. There needs to be a value in "filter_costs" for each valid filter
+ * type (given by PNG_FILTER_VALUE_LAST), or it can be NULL if you aren't
+ * setting the costs. Costs try to improve the speed of decompression without
+ * unduly increasing the compressed image size.
+ *
+ * A negative weight or cost indicates the default value is to be used, and
+ * values in the range [0.0, 1.0) indicate the value is to remain unchanged.
+ * The default values for both weights and costs are currently 1.0, but may
+ * change if good general weighting/cost heuristics can be found. If both
+ * the weights and costs are set to 1.0, this degenerates the WEIGHTED method
+ * to the UNWEIGHTED method, but with added encoding time/computation.
+ */
+PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structp png_ptr,
+ int heuristic_method, int num_weights, png_const_doublep filter_weights,
+ png_const_doublep filter_costs))
+PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed,
+ (png_structp png_ptr,
+ int heuristic_method, int num_weights, png_const_fixed_point_p
+ filter_weights, png_const_fixed_point_p filter_costs))
+#endif /* PNG_WRITE_WEIGHTED_FILTER_SUPPORTED */
+
+/* Heuristic used for row filter selection. These defines should NOT be
+ * changed.
+ */
+#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */
+#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */
+#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */
+#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */
+
+#ifdef PNG_WRITE_SUPPORTED
+/* Set the library compression level. Currently, valid values range from
+ * 0 - 9, corresponding directly to the zlib compression levels 0 - 9
+ * (0 - no compression, 9 - "maximal" compression). Note that tests have
+ * shown that zlib compression levels 3-6 usually perform as well as level 9
+ * for PNG images, and do considerably fewer caclulations. In the future,
+ * these values may not correspond directly to the zlib compression levels.
+ */
+PNG_EXPORT(69, void, png_set_compression_level,
+ (png_structp png_ptr, int level));
+
+PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structp png_ptr,
+ int mem_level));
+
+PNG_EXPORT(71, void, png_set_compression_strategy, (png_structp png_ptr,
+ int strategy));
+
+/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a
+ * smaller value of window_bits if it can do so safely.
+ */
+PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structp png_ptr,
+ int window_bits));
+
+PNG_EXPORT(73, void, png_set_compression_method, (png_structp png_ptr,
+ int method));
+#endif
+
+#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED
+/* Also set zlib parameters for compressing non-IDAT chunks */
+PNG_EXPORT(222, void, png_set_text_compression_level,
+ (png_structp png_ptr, int level));
+
+PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structp png_ptr,
+ int mem_level));
+
+PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structp png_ptr,
+ int strategy));
+
+/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a
+ * smaller value of window_bits if it can do so safely.
+ */
+PNG_EXPORT(225, void, png_set_text_compression_window_bits, (png_structp
+ png_ptr, int window_bits));
+
+PNG_EXPORT(226, void, png_set_text_compression_method, (png_structp png_ptr,
+ int method));
+#endif /* PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED */
+
+/* These next functions are called for input/output, memory, and error
+ * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c,
+ * and call standard C I/O routines such as fread(), fwrite(), and
+ * fprintf(). These functions can be made to use other I/O routines
+ * at run time for those applications that need to handle I/O in a
+ * different manner by calling png_set_???_fn(). See libpng-manual.txt for
+ * more information.
+ */
+
+#ifdef PNG_STDIO_SUPPORTED
+/* Initialize the input/output for the PNG file to the default functions. */
+PNG_EXPORT(74, void, png_init_io, (png_structp png_ptr, png_FILE_p fp));
+#endif
+
+/* Replace the (error and abort), and warning functions with user
+ * supplied functions. If no messages are to be printed you must still
+ * write and use replacement functions. The replacement error_fn should
+ * still do a longjmp to the last setjmp location if you are using this
+ * method of error handling. If error_fn or warning_fn is NULL, the
+ * default function will be used.
+ */
+
+PNG_EXPORT(75, void, png_set_error_fn,
+ (png_structp png_ptr, png_voidp error_ptr,
+ png_error_ptr error_fn, png_error_ptr warning_fn));
+
+/* Return the user pointer associated with the error functions */
+PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structp png_ptr));
+
+/* Replace the default data output functions with a user supplied one(s).
+ * If buffered output is not used, then output_flush_fn can be set to NULL.
+ * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time
+ * output_flush_fn will be ignored (and thus can be NULL).
+ * It is probably a mistake to use NULL for output_flush_fn if
+ * write_data_fn is not also NULL unless you have built libpng with
+ * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's
+ * default flush function, which uses the standard *FILE structure, will
+ * be used.
+ */
+PNG_EXPORT(77, void, png_set_write_fn, (png_structp png_ptr, png_voidp io_ptr,
+ png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn));
+
+/* Replace the default data input function with a user supplied one. */
+PNG_EXPORT(78, void, png_set_read_fn, (png_structp png_ptr, png_voidp io_ptr,
+ png_rw_ptr read_data_fn));
+
+/* Return the user pointer associated with the I/O functions */
+PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_structp png_ptr));
+
+PNG_EXPORT(80, void, png_set_read_status_fn, (png_structp png_ptr,
+ png_read_status_ptr read_row_fn));
+
+PNG_EXPORT(81, void, png_set_write_status_fn, (png_structp png_ptr,
+ png_write_status_ptr write_row_fn));
+
+#ifdef PNG_USER_MEM_SUPPORTED
+/* Replace the default memory allocation functions with user supplied one(s). */
+PNG_EXPORT(82, void, png_set_mem_fn, (png_structp png_ptr, png_voidp mem_ptr,
+ png_malloc_ptr malloc_fn, png_free_ptr free_fn));
+/* Return the user pointer associated with the memory functions */
+PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structp png_ptr));
+#endif
+
+#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED
+PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structp png_ptr,
+ png_user_transform_ptr read_user_transform_fn));
+#endif
+
+#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED
+PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structp png_ptr,
+ png_user_transform_ptr write_user_transform_fn));
+#endif
+
+#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED
+PNG_EXPORT(86, void, png_set_user_transform_info, (png_structp png_ptr,
+ png_voidp user_transform_ptr, int user_transform_depth,
+ int user_transform_channels));
+/* Return the user pointer associated with the user transform functions */
+PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr,
+ (png_const_structp png_ptr));
+#endif
+
+#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED
+/* Return information about the row currently being processed. Note that these
+ * APIs do not fail but will return unexpected results if called outside a user
+ * transform callback. Also note that when transforming an interlaced image the
+ * row number is the row number within the sub-image of the interlace pass, so
+ * the value will increase to the height of the sub-image (not the full image)
+ * then reset to 0 for the next pass.
+ *
+ * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to
+ * find the output pixel (x,y) given an interlaced sub-image pixel
+ * (row,col,pass). (See below for these macros.)
+ */
+PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structp));
+PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structp));
+#endif
+
+#ifdef PNG_USER_CHUNKS_SUPPORTED
+PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structp png_ptr,
+ png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn));
+PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structp png_ptr));
+#endif
+
+#ifdef PNG_PROGRESSIVE_READ_SUPPORTED
+/* Sets the function callbacks for the push reader, and a pointer to a
+ * user-defined structure available to the callback functions.
+ */
+PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structp png_ptr,
+ png_voidp progressive_ptr, png_progressive_info_ptr info_fn,
+ png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn));
+
+/* Returns the user pointer associated with the push read functions */
+PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, (png_const_structp png_ptr));
+
+/* Function to be called when data becomes available */
+PNG_EXPORT(92, void, png_process_data,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_bytep buffer, png_size_t buffer_size));
+
+/* A function which may be called *only* within png_process_data to stop the
+ * processing of any more data. The function returns the number of bytes
+ * remaining, excluding any that libpng has cached internally. A subsequent
+ * call to png_process_data must supply these bytes again. If the argument
+ * 'save' is set to true the routine will first save all the pending data and
+ * will always return 0.
+ */
+PNG_EXPORT(219, png_size_t, png_process_data_pause, (png_structp, int save));
+
+/* A function which may be called *only* outside (after) a call to
+ * png_process_data. It returns the number of bytes of data to skip in the
+ * input. Normally it will return 0, but if it returns a non-zero value the
+ * application must skip than number of bytes of input data and pass the
+ * following data to the next call to png_process_data.
+ */
+PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structp));
+
+#ifdef PNG_READ_INTERLACING_SUPPORTED
+/* Function that combines rows. 'new_row' is a flag that should come from
+ * the callback and be non-NULL if anything needs to be done; the library
+ * stores its own version of the new data internally and ignores the passed
+ * in value.
+ */
+PNG_EXPORT(93, void, png_progressive_combine_row, (png_structp png_ptr,
+ png_bytep old_row, png_const_bytep new_row));
+#endif /* PNG_READ_INTERLACING_SUPPORTED */
+#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */
+
+PNG_EXPORTA(94, png_voidp, png_malloc,
+ (png_structp png_ptr, png_alloc_size_t size),
+ PNG_ALLOCATED);
+/* Added at libpng version 1.4.0 */
+PNG_EXPORTA(95, png_voidp, png_calloc,
+ (png_structp png_ptr, png_alloc_size_t size),
+ PNG_ALLOCATED);
+
+/* Added at libpng version 1.2.4 */
+PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_structp png_ptr,
+ png_alloc_size_t size), PNG_ALLOCATED);
+
+/* Frees a pointer allocated by png_malloc() */
+PNG_EXPORT(97, void, png_free, (png_structp png_ptr, png_voidp ptr));
+
+/* Free data that was allocated internally */
+PNG_EXPORT(98, void, png_free_data,
+ (png_structp png_ptr, png_infop info_ptr, png_uint_32 free_me, int num));
+
+/* Reassign responsibility for freeing existing data, whether allocated
+ * by libpng or by the application */
+PNG_EXPORT(99, void, png_data_freer,
+ (png_structp png_ptr, png_infop info_ptr, int freer, png_uint_32 mask));
+
+/* Assignments for png_data_freer */
+#define PNG_DESTROY_WILL_FREE_DATA 1
+#define PNG_SET_WILL_FREE_DATA 1
+#define PNG_USER_WILL_FREE_DATA 2
+/* Flags for png_ptr->free_me and info_ptr->free_me */
+#define PNG_FREE_HIST 0x0008
+#define PNG_FREE_ICCP 0x0010
+#define PNG_FREE_SPLT 0x0020
+#define PNG_FREE_ROWS 0x0040
+#define PNG_FREE_PCAL 0x0080
+#define PNG_FREE_SCAL 0x0100
+#define PNG_FREE_UNKN 0x0200
+#define PNG_FREE_LIST 0x0400
+#define PNG_FREE_PLTE 0x1000
+#define PNG_FREE_TRNS 0x2000
+#define PNG_FREE_TEXT 0x4000
+#define PNG_FREE_ALL 0x7fff
+#define PNG_FREE_MUL 0x4220 /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */
+
+#ifdef PNG_USER_MEM_SUPPORTED
+PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_structp png_ptr,
+ png_alloc_size_t size), PNG_ALLOCATED);
+PNG_EXPORT(101, void, png_free_default, (png_structp png_ptr, png_voidp ptr));
+#endif
+
+#ifdef PNG_ERROR_TEXT_SUPPORTED
+/* Fatal error in PNG image of libpng - can't continue */
+PNG_EXPORTA(102, void, png_error,
+ (png_structp png_ptr, png_const_charp error_message),
+ PNG_NORETURN);
+
+/* The same, but the chunk name is prepended to the error string. */
+PNG_EXPORTA(103, void, png_chunk_error, (png_structp png_ptr,
+ png_const_charp error_message), PNG_NORETURN);
+
+#else
+/* Fatal error in PNG image of libpng - can't continue */
+PNG_EXPORTA(104, void, png_err, (png_structp png_ptr), PNG_NORETURN);
+#endif
+
+#ifdef PNG_WARNINGS_SUPPORTED
+/* Non-fatal error in libpng. Can continue, but may have a problem. */
+PNG_EXPORT(105, void, png_warning, (png_structp png_ptr,
+ png_const_charp warning_message));
+
+/* Non-fatal error in libpng, chunk name is prepended to message. */
+PNG_EXPORT(106, void, png_chunk_warning, (png_structp png_ptr,
+ png_const_charp warning_message));
+#endif
+
+#ifdef PNG_BENIGN_ERRORS_SUPPORTED
+/* Benign error in libpng. Can continue, but may have a problem.
+ * User can choose whether to handle as a fatal error or as a warning. */
+# undef png_benign_error
+PNG_EXPORT(107, void, png_benign_error, (png_structp png_ptr,
+ png_const_charp warning_message));
+
+/* Same, chunk name is prepended to message. */
+# undef png_chunk_benign_error
+PNG_EXPORT(108, void, png_chunk_benign_error, (png_structp png_ptr,
+ png_const_charp warning_message));
+
+PNG_EXPORT(109, void, png_set_benign_errors,
+ (png_structp png_ptr, int allowed));
+#else
+# ifdef PNG_ALLOW_BENIGN_ERRORS
+# define png_benign_error png_warning
+# define png_chunk_benign_error png_chunk_warning
+# else
+# define png_benign_error png_error
+# define png_chunk_benign_error png_chunk_error
+# endif
+#endif
+
+/* The png_set_<chunk> functions are for storing values in the png_info_struct.
+ * Similarly, the png_get_<chunk> calls are used to read values from the
+ * png_info_struct, either storing the parameters in the passed variables, or
+ * setting pointers into the png_info_struct where the data is stored. The
+ * png_get_<chunk> functions return a non-zero value if the data was available
+ * in info_ptr, or return zero and do not change any of the parameters if the
+ * data was not available.
+ *
+ * These functions should be used instead of directly accessing png_info
+ * to avoid problems with future changes in the size and internal layout of
+ * png_info_struct.
+ */
+/* Returns "flag" if chunk data is valid in info_ptr. */
+PNG_EXPORT(110, png_uint_32, png_get_valid,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_uint_32 flag));
+
+/* Returns number of bytes needed to hold a transformed row. */
+PNG_EXPORT(111, png_size_t, png_get_rowbytes, (png_const_structp png_ptr,
+ png_const_infop info_ptr));
+
+#ifdef PNG_INFO_IMAGE_SUPPORTED
+/* Returns row_pointers, which is an array of pointers to scanlines that was
+ * returned from png_read_png().
+ */
+PNG_EXPORT(112, png_bytepp, png_get_rows,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+/* Set row_pointers, which is an array of pointers to scanlines for use
+ * by png_write_png().
+ */
+PNG_EXPORT(113, void, png_set_rows, (png_structp png_ptr,
+ png_infop info_ptr, png_bytepp row_pointers));
+#endif
+
+/* Returns number of color channels in image. */
+PNG_EXPORT(114, png_byte, png_get_channels,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+
+#ifdef PNG_EASY_ACCESS_SUPPORTED
+/* Returns image width in pixels. */
+PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structp png_ptr,
+ png_const_infop info_ptr));
+
+/* Returns image height in pixels. */
+PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structp png_ptr,
+ png_const_infop info_ptr));
+
+/* Returns image bit_depth. */
+PNG_EXPORT(117, png_byte, png_get_bit_depth,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+
+/* Returns image color_type. */
+PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structp png_ptr,
+ png_const_infop info_ptr));
+
+/* Returns image filter_type. */
+PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structp png_ptr,
+ png_const_infop info_ptr));
+
+/* Returns image interlace_type. */
+PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structp png_ptr,
+ png_const_infop info_ptr));
+
+/* Returns image compression_type. */
+PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structp png_ptr,
+ png_const_infop info_ptr));
+
+/* Returns image resolution in pixels per meter, from pHYs chunk data. */
+PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+
+/* Returns pixel aspect ratio, computed from pHYs chunk data. */
+PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio,
+ (png_const_structp png_ptr, png_const_infop info_ptr))
+PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed,
+ (png_const_structp png_ptr, png_const_infop info_ptr))
+
+/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */
+PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(128, png_int_32, png_get_x_offset_microns,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+PNG_EXPORT(129, png_int_32, png_get_y_offset_microns,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+
+#endif /* PNG_EASY_ACCESS_SUPPORTED */
+
+/* Returns pointer to signature string read from PNG header */
+PNG_EXPORT(130, png_const_bytep, png_get_signature,
+ (png_const_structp png_ptr, png_infop info_ptr));
+
+#ifdef PNG_bKGD_SUPPORTED
+PNG_EXPORT(131, png_uint_32, png_get_bKGD,
+ (png_const_structp png_ptr, png_infop info_ptr,
+ png_color_16p *background));
+#endif
+
+#ifdef PNG_bKGD_SUPPORTED
+PNG_EXPORT(132, void, png_set_bKGD, (png_structp png_ptr, png_infop info_ptr,
+ png_const_color_16p background));
+#endif
+
+#ifdef PNG_cHRM_SUPPORTED
+PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structp png_ptr,
+ png_const_infop info_ptr, double *white_x, double *white_y, double *red_x,
+ double *red_y, double *green_x, double *green_y, double *blue_x,
+ double *blue_y))
+PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_structp png_ptr,
+ png_const_infop info_ptr, double *red_X, double *red_Y, double *red_Z,
+ double *green_X, double *green_Y, double *green_Z, double *blue_X,
+ double *blue_Y, double *blue_Z))
+#ifdef PNG_FIXED_POINT_SUPPORTED /* Otherwise not implemented */
+PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed,
+ (png_const_structp png_ptr,
+ png_const_infop info_ptr, png_fixed_point *int_white_x,
+ png_fixed_point *int_white_y, png_fixed_point *int_red_x,
+ png_fixed_point *int_red_y, png_fixed_point *int_green_x,
+ png_fixed_point *int_green_y, png_fixed_point *int_blue_x,
+ png_fixed_point *int_blue_y))
+#endif
+PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed,
+ (png_structp png_ptr, png_const_infop info_ptr,
+ png_fixed_point *int_red_X, png_fixed_point *int_red_Y,
+ png_fixed_point *int_red_Z, png_fixed_point *int_green_X,
+ png_fixed_point *int_green_Y, png_fixed_point *int_green_Z,
+ png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y,
+ png_fixed_point *int_blue_Z))
+#endif
+
+#ifdef PNG_cHRM_SUPPORTED
+PNG_FP_EXPORT(135, void, png_set_cHRM,
+ (png_structp png_ptr, png_infop info_ptr,
+ double white_x, double white_y, double red_x, double red_y, double green_x,
+ double green_y, double blue_x, double blue_y))
+PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_structp png_ptr,
+ png_infop info_ptr, double red_X, double red_Y, double red_Z,
+ double green_X, double green_Y, double green_Z, double blue_X,
+ double blue_Y, double blue_Z))
+PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_structp png_ptr,
+ png_infop info_ptr, png_fixed_point int_white_x,
+ png_fixed_point int_white_y, png_fixed_point int_red_x,
+ png_fixed_point int_red_y, png_fixed_point int_green_x,
+ png_fixed_point int_green_y, png_fixed_point int_blue_x,
+ png_fixed_point int_blue_y))
+PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_structp png_ptr,
+ png_infop info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y,
+ png_fixed_point int_red_Z, png_fixed_point int_green_X,
+ png_fixed_point int_green_Y, png_fixed_point int_green_Z,
+ png_fixed_point int_blue_X, png_fixed_point int_blue_Y,
+ png_fixed_point int_blue_Z))
+#endif
+
+#ifdef PNG_gAMA_SUPPORTED
+PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ double *file_gamma))
+PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_fixed_point *int_file_gamma))
+#endif
+
+#ifdef PNG_gAMA_SUPPORTED
+PNG_FP_EXPORT(139, void, png_set_gAMA, (png_structp png_ptr,
+ png_infop info_ptr, double file_gamma))
+PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_structp png_ptr,
+ png_infop info_ptr, png_fixed_point int_file_gamma))
+#endif
+
+#ifdef PNG_hIST_SUPPORTED
+PNG_EXPORT(141, png_uint_32, png_get_hIST,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_uint_16p *hist));
+#endif
+
+#ifdef PNG_hIST_SUPPORTED
+PNG_EXPORT(142, void, png_set_hIST, (png_structp png_ptr,
+ png_infop info_ptr, png_const_uint_16p hist));
+#endif
+
+PNG_EXPORT(143, png_uint_32, png_get_IHDR,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_uint_32 *width, png_uint_32 *height, int *bit_depth, int *color_type,
+ int *interlace_method, int *compression_method, int *filter_method));
+
+PNG_EXPORT(144, void, png_set_IHDR,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_uint_32 width, png_uint_32 height, int bit_depth, int color_type,
+ int interlace_method, int compression_method, int filter_method));
+
+#ifdef PNG_oFFs_SUPPORTED
+PNG_EXPORT(145, png_uint_32, png_get_oFFs,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_int_32 *offset_x, png_int_32 *offset_y, int *unit_type));
+#endif
+
+#ifdef PNG_oFFs_SUPPORTED
+PNG_EXPORT(146, void, png_set_oFFs,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_int_32 offset_x, png_int_32 offset_y, int unit_type));
+#endif
+
+#ifdef PNG_pCAL_SUPPORTED
+PNG_EXPORT(147, png_uint_32, png_get_pCAL,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_charp *purpose, png_int_32 *X0, png_int_32 *X1, int *type,
+ int *nparams,
+ png_charp *units, png_charpp *params));
+#endif
+
+#ifdef PNG_pCAL_SUPPORTED
+PNG_EXPORT(148, void, png_set_pCAL, (png_structp png_ptr,
+ png_infop info_ptr,
+ png_const_charp purpose, png_int_32 X0, png_int_32 X1, int type,
+ int nparams, png_const_charp units, png_charpp params));
+#endif
+
+#ifdef PNG_pHYs_SUPPORTED
+PNG_EXPORT(149, png_uint_32, png_get_pHYs,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_uint_32 *res_x, png_uint_32 *res_y, int *unit_type));
+#endif
+
+#ifdef PNG_pHYs_SUPPORTED
+PNG_EXPORT(150, void, png_set_pHYs,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_uint_32 res_x, png_uint_32 res_y, int unit_type));
+#endif
+
+PNG_EXPORT(151, png_uint_32, png_get_PLTE,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_colorp *palette, int *num_palette));
+
+PNG_EXPORT(152, void, png_set_PLTE,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_const_colorp palette, int num_palette));
+
+#ifdef PNG_sBIT_SUPPORTED
+PNG_EXPORT(153, png_uint_32, png_get_sBIT,
+ (png_const_structp png_ptr, png_infop info_ptr,
+ png_color_8p *sig_bit));
+#endif
+
+#ifdef PNG_sBIT_SUPPORTED
+PNG_EXPORT(154, void, png_set_sBIT,
+ (png_structp png_ptr, png_infop info_ptr, png_const_color_8p sig_bit));
+#endif
+
+#ifdef PNG_sRGB_SUPPORTED
+PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structp png_ptr,
+ png_const_infop info_ptr, int *file_srgb_intent));
+#endif
+
+#ifdef PNG_sRGB_SUPPORTED
+PNG_EXPORT(156, void, png_set_sRGB,
+ (png_structp png_ptr, png_infop info_ptr, int srgb_intent));
+PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_structp png_ptr,
+ png_infop info_ptr, int srgb_intent));
+#endif
+
+#ifdef PNG_iCCP_SUPPORTED
+PNG_EXPORT(158, png_uint_32, png_get_iCCP,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_charpp name, int *compression_type, png_bytepp profile,
+ png_uint_32 *proflen));
+#endif
+
+#ifdef PNG_iCCP_SUPPORTED
+PNG_EXPORT(159, void, png_set_iCCP,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_const_charp name, int compression_type, png_const_bytep profile,
+ png_uint_32 proflen));
+#endif
+
+#ifdef PNG_sPLT_SUPPORTED
+PNG_EXPORT(160, png_uint_32, png_get_sPLT,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_sPLT_tpp entries));
+#endif
+
+#ifdef PNG_sPLT_SUPPORTED
+PNG_EXPORT(161, void, png_set_sPLT,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_const_sPLT_tp entries, int nentries));
+#endif
+
+#ifdef PNG_TEXT_SUPPORTED
+/* png_get_text also returns the number of text chunks in *num_text */
+PNG_EXPORT(162, png_uint_32, png_get_text,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ png_textp *text_ptr, int *num_text));
+#endif
+
+/* Note while png_set_text() will accept a structure whose text,
+ * language, and translated keywords are NULL pointers, the structure
+ * returned by png_get_text will always contain regular
+ * zero-terminated C strings. They might be empty strings but
+ * they will never be NULL pointers.
+ */
+
+#ifdef PNG_TEXT_SUPPORTED
+PNG_EXPORT(163, void, png_set_text,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_const_textp text_ptr, int num_text));
+#endif
+
+#ifdef PNG_tIME_SUPPORTED
+PNG_EXPORT(164, png_uint_32, png_get_tIME,
+ (png_const_structp png_ptr, png_infop info_ptr, png_timep *mod_time));
+#endif
+
+#ifdef PNG_tIME_SUPPORTED
+PNG_EXPORT(165, void, png_set_tIME,
+ (png_structp png_ptr, png_infop info_ptr, png_const_timep mod_time));
+#endif
+
+#ifdef PNG_tRNS_SUPPORTED
+PNG_EXPORT(166, png_uint_32, png_get_tRNS,
+ (png_const_structp png_ptr, png_infop info_ptr,
+ png_bytep *trans_alpha, int *num_trans, png_color_16p *trans_color));
+#endif
+
+#ifdef PNG_tRNS_SUPPORTED
+PNG_EXPORT(167, void, png_set_tRNS,
+ (png_structp png_ptr, png_infop info_ptr,
+ png_const_bytep trans_alpha, int num_trans,
+ png_const_color_16p trans_color));
+#endif
+
+#ifdef PNG_sCAL_SUPPORTED
+PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ int *unit, double *width, double *height))
+#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
+/* NOTE: this API is currently implemented using floating point arithmetic,
+ * consequently it can only be used on systems with floating point support.
+ * In any case the range of values supported by png_fixed_point is small and it
+ * is highly recommended that png_get_sCAL_s be used instead.
+ */
+PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed,
+ (png_structp png_ptr, png_const_infop info_ptr, int *unit,
+ png_fixed_point *width,
+ png_fixed_point *height))
+#endif
+PNG_EXPORT(169, png_uint_32, png_get_sCAL_s,
+ (png_const_structp png_ptr, png_const_infop info_ptr,
+ int *unit, png_charpp swidth, png_charpp sheight));
+
+PNG_FP_EXPORT(170, void, png_set_sCAL,
+ (png_structp png_ptr, png_infop info_ptr,
+ int unit, double width, double height))
+PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_structp png_ptr,
+ png_infop info_ptr, int unit, png_fixed_point width,
+ png_fixed_point height))
+PNG_EXPORT(171, void, png_set_sCAL_s,
+ (png_structp png_ptr, png_infop info_ptr,
+ int unit, png_const_charp swidth, png_const_charp sheight));
+#endif /* PNG_sCAL_SUPPORTED */
+
+#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED
+/* Provide a list of chunks and how they are to be handled, if the built-in
+ handling or default unknown chunk handling is not desired. Any chunks not
+ listed will be handled in the default manner. The IHDR and IEND chunks
+ must not be listed. Because this turns off the default handling for chunks
+ that would otherwise be recognized the behavior of libpng transformations may
+ well become incorrect!
+ keep = 0: PNG_HANDLE_CHUNK_AS_DEFAULT: follow default behavior
+ = 1: PNG_HANDLE_CHUNK_NEVER: do not keep
+ = 2: PNG_HANDLE_CHUNK_IF_SAFE: keep only if safe-to-copy
+ = 3: PNG_HANDLE_CHUNK_ALWAYS: keep even if unsafe-to-copy
+*/
+PNG_EXPORT(172, void, png_set_keep_unknown_chunks,
+ (png_structp png_ptr, int keep,
+ png_const_bytep chunk_list, int num_chunks));
+
+/* The handling code is returned; the result is therefore true (non-zero) if
+ * special handling is required, false for the default handling.
+ */
+PNG_EXPORT(173, int, png_handle_as_unknown, (png_structp png_ptr,
+ png_const_bytep chunk_name));
+#endif
+#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED
+PNG_EXPORT(174, void, png_set_unknown_chunks, (png_structp png_ptr,
+ png_infop info_ptr, png_const_unknown_chunkp unknowns,
+ int num_unknowns));
+PNG_EXPORT(175, void, png_set_unknown_chunk_location,
+ (png_structp png_ptr, png_infop info_ptr, int chunk, int location));
+PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structp png_ptr,
+ png_const_infop info_ptr, png_unknown_chunkpp entries));
+#endif
+
+/* Png_free_data() will turn off the "valid" flag for anything it frees.
+ * If you need to turn it off for a chunk that your application has freed,
+ * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK);
+ */
+PNG_EXPORT(177, void, png_set_invalid,
+ (png_structp png_ptr, png_infop info_ptr, int mask));
+
+#ifdef PNG_INFO_IMAGE_SUPPORTED
+/* The "params" pointer is currently not used and is for future expansion. */
+PNG_EXPORT(178, void, png_read_png, (png_structp png_ptr, png_infop info_ptr,
+ int transforms, png_voidp params));
+PNG_EXPORT(179, void, png_write_png, (png_structp png_ptr, png_infop info_ptr,
+ int transforms, png_voidp params));
+#endif
+
+PNG_EXPORT(180, png_const_charp, png_get_copyright,
+ (png_const_structp png_ptr));
+PNG_EXPORT(181, png_const_charp, png_get_header_ver,
+ (png_const_structp png_ptr));
+PNG_EXPORT(182, png_const_charp, png_get_header_version,
+ (png_const_structp png_ptr));
+PNG_EXPORT(183, png_const_charp, png_get_libpng_ver,
+ (png_const_structp png_ptr));
+
+#ifdef PNG_MNG_FEATURES_SUPPORTED
+PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structp png_ptr,
+ png_uint_32 mng_features_permitted));
+#endif
+
+/* For use in png_set_keep_unknown, added to version 1.2.6 */
+#define PNG_HANDLE_CHUNK_AS_DEFAULT 0
+#define PNG_HANDLE_CHUNK_NEVER 1
+#define PNG_HANDLE_CHUNK_IF_SAFE 2
+#define PNG_HANDLE_CHUNK_ALWAYS 3
+
+/* Strip the prepended error numbers ("#nnn ") from error and warning
+ * messages before passing them to the error or warning handler.
+ */
+#ifdef PNG_ERROR_NUMBERS_SUPPORTED
+PNG_EXPORT(185, void, png_set_strip_error_numbers,
+ (png_structp png_ptr,
+ png_uint_32 strip_mode));
+#endif
+
+/* Added in libpng-1.2.6 */
+#ifdef PNG_SET_USER_LIMITS_SUPPORTED
+PNG_EXPORT(186, void, png_set_user_limits, (png_structp png_ptr,
+ png_uint_32 user_width_max, png_uint_32 user_height_max));
+PNG_EXPORT(187, png_uint_32, png_get_user_width_max,
+ (png_const_structp png_ptr));
+PNG_EXPORT(188, png_uint_32, png_get_user_height_max,
+ (png_const_structp png_ptr));
+/* Added in libpng-1.4.0 */
+PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structp png_ptr,
+ png_uint_32 user_chunk_cache_max));
+PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max,
+ (png_const_structp png_ptr));
+/* Added in libpng-1.4.1 */
+PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structp png_ptr,
+ png_alloc_size_t user_chunk_cache_max));
+PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max,
+ (png_const_structp png_ptr));
+#endif
+
+#if defined(PNG_INCH_CONVERSIONS_SUPPORTED)
+PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+
+PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+
+PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch,
+ (png_const_structp png_ptr, png_const_infop info_ptr));
+
+PNG_FP_EXPORT(196, float, png_get_x_offset_inches,
+ (png_const_structp png_ptr, png_const_infop info_ptr))
+#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */
+PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed,
+ (png_structp png_ptr, png_const_infop info_ptr))
+#endif
+
+PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structp png_ptr,
+ png_const_infop info_ptr))
+#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */
+PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed,
+ (png_structp png_ptr, png_const_infop info_ptr))
+#endif
+
+# ifdef PNG_pHYs_SUPPORTED
+PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structp png_ptr,
+ png_const_infop info_ptr, png_uint_32 *res_x, png_uint_32 *res_y,
+ int *unit_type));
+# endif /* PNG_pHYs_SUPPORTED */
+#endif /* PNG_INCH_CONVERSIONS_SUPPORTED */
+
+/* Added in libpng-1.4.0 */
+#ifdef PNG_IO_STATE_SUPPORTED
+PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_structp png_ptr));
+
+PNG_EXPORTA(200, png_const_bytep, png_get_io_chunk_name,
+ (png_structp png_ptr), PNG_DEPRECATED);
+PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type,
+ (png_const_structp png_ptr));
+
+/* The flags returned by png_get_io_state() are the following: */
+# define PNG_IO_NONE 0x0000 /* no I/O at this moment */
+# define PNG_IO_READING 0x0001 /* currently reading */
+# define PNG_IO_WRITING 0x0002 /* currently writing */
+# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */
+# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */
+# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */
+# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */
+# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */
+# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */
+#endif /* ?PNG_IO_STATE_SUPPORTED */
+
+/* Interlace support. The following macros are always defined so that if
+ * libpng interlace handling is turned off the macros may be used to handle
+ * interlaced images within the application.
+ */
+#define PNG_INTERLACE_ADAM7_PASSES 7
+
+/* Two macros to return the first row and first column of the original,
+ * full, image which appears in a given pass. 'pass' is in the range 0
+ * to 6 and the result is in the range 0 to 7.
+ */
+#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7)
+#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7)
+
+/* A macro to return the offset between pixels in the output row for a pair of
+ * pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that
+ * follows. Note that ROW_OFFSET is the offset from one row to the next whereas
+ * COL_OFFSET is from one column to the next, within a row.
+ */
+#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8)
+#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1))
+
+/* Two macros to help evaluate the number of rows or columns in each
+ * pass. This is expressed as a shift - effectively log2 of the number or
+ * rows or columns in each 8x8 tile of the original image.
+ */
+#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3)
+#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3)
+
+/* Hence two macros to determine the number of rows or columns in a given
+ * pass of an image given its height or width. In fact these macros may
+ * return non-zero even though the sub-image is empty, because the other
+ * dimension may be empty for a small image.
+ */
+#define PNG_PASS_ROWS(height, pass) (((height)+(((1<<PNG_PASS_ROW_SHIFT(pass))\
+ -1)-PNG_PASS_START_ROW(pass)))>>PNG_PASS_ROW_SHIFT(pass))
+#define PNG_PASS_COLS(width, pass) (((width)+(((1<<PNG_PASS_COL_SHIFT(pass))\
+ -1)-PNG_PASS_START_COL(pass)))>>PNG_PASS_COL_SHIFT(pass))
+
+/* For the reader row callbacks (both progressive and sequential) it is
+ * necessary to find the row in the output image given a row in an interlaced
+ * image, so two more macros:
+ */
+#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \
+ (((yIn)<<PNG_PASS_ROW_SHIFT(pass))+PNG_PASS_START_ROW(pass))
+#define PNG_COL_FROM_PASS_COL(xIn, pass) \
+ (((xIn)<<PNG_PASS_COL_SHIFT(pass))+PNG_PASS_START_COL(pass))
+
+/* Two macros which return a boolean (0 or 1) saying whether the given row
+ * or column is in a particular pass. These use a common utility macro that
+ * returns a mask for a given pass - the offset 'off' selects the row or
+ * column version. The mask has the appropriate bit set for each column in
+ * the tile.
+ */
+#define PNG_PASS_MASK(pass,off) ( \
+ ((0x110145AF>>(((7-(off))-(pass))<<2)) & 0xF) | \
+ ((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0))
+
+#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \
+ ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1)
+#define PNG_COL_IN_INTERLACE_PASS(x, pass) \
+ ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1)
+
+#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED
+/* With these routines we avoid an integer divide, which will be slower on
+ * most machines. However, it does take more operations than the corresponding
+ * divide method, so it may be slower on a few RISC systems. There are two
+ * shifts (by 8 or 16 bits) and an addition, versus a single integer divide.
+ *
+ * Note that the rounding factors are NOT supposed to be the same! 128 and
+ * 32768 are correct for the NODIV code; 127 and 32767 are correct for the
+ * standard method.
+ *
+ * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ]
+ */
+
+ /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */
+
+# define png_composite(composite, fg, alpha, bg) \
+ { png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \
+ * (png_uint_16)(alpha) \
+ + (png_uint_16)(bg)*(png_uint_16)(255 \
+ - (png_uint_16)(alpha)) + 128); \
+ (composite) = (png_byte)((temp + (temp >> 8)) >> 8); }
+
+# define png_composite_16(composite, fg, alpha, bg) \
+ { png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \
+ * (png_uint_32)(alpha) \
+ + (png_uint_32)(bg)*(65535 \
+ - (png_uint_32)(alpha)) + 32768); \
+ (composite) = (png_uint_16)((temp + (temp >> 16)) >> 16); }
+
+#else /* Standard method using integer division */
+
+# define png_composite(composite, fg, alpha, bg) \
+ (composite) = (png_byte)(((png_uint_16)(fg) * (png_uint_16)(alpha) + \
+ (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \
+ 127) / 255)
+
+# define png_composite_16(composite, fg, alpha, bg) \
+ (composite) = (png_uint_16)(((png_uint_32)(fg) * (png_uint_32)(alpha) + \
+ (png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) + \
+ 32767) / 65535)
+#endif /* PNG_READ_COMPOSITE_NODIV_SUPPORTED */
+
+#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED
+PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf));
+PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf));
+PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf));
+#endif
+
+PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_structp png_ptr,
+ png_const_bytep buf));
+/* No png_get_int_16 -- may be added if there's a real need for it. */
+
+/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */
+#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED
+PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i));
+#endif
+#ifdef PNG_SAVE_INT_32_SUPPORTED
+PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i));
+#endif
+
+/* Place a 16-bit number into a buffer in PNG byte order.
+ * The parameter is declared unsigned int, not png_uint_16,
+ * just to avoid potential problems on pre-ANSI C compilers.
+ */
+#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED
+PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i));
+/* No png_save_int_16 -- may be added if there's a real need for it. */
+#endif
+
+#ifdef PNG_USE_READ_MACROS
+/* Inline macros to do direct reads of bytes from the input buffer.
+ * The png_get_int_32() routine assumes we are using two's complement
+ * format for negative values, which is almost certainly true.
+ */
+# define png_get_uint_32(buf) \
+ (((png_uint_32)(*(buf)) << 24) + \
+ ((png_uint_32)(*((buf) + 1)) << 16) + \
+ ((png_uint_32)(*((buf) + 2)) << 8) + \
+ ((png_uint_32)(*((buf) + 3))))
+
+ /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the
+ * function) incorrectly returned a value of type png_uint_32.
+ */
+# define png_get_uint_16(buf) \
+ ((png_uint_16) \
+ (((unsigned int)(*(buf)) << 8) + \
+ ((unsigned int)(*((buf) + 1)))))
+
+# define png_get_int_32(buf) \
+ ((png_int_32)((*(buf) & 0x80) \
+ ? -((png_int_32)((png_get_uint_32(buf) ^ 0xffffffffL) + 1)) \
+ : (png_int_32)png_get_uint_32(buf)))
+#endif
+
+#if defined(PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED) || \
+ defined(PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED)
+PNG_EXPORT(234, void, png_set_check_for_invalid_index, (png_structp png_ptr,
+ int allowed));
+#endif
+
+/* Maintainer: Put new public prototypes here ^, in libpng.3, and project
+ * defs
+ */
+
+/* The last ordinal number (this is the *last* one already used; the next
+ * one to use is one more than this.) Maintainer, remember to add an entry to
+ * scripts/symbols.def as well.
+ */
+#ifdef PNG_EXPORT_LAST_ORDINAL
+ PNG_EXPORT_LAST_ORDINAL(234);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PNG_VERSION_INFO_ONLY */
+/* Do not put anything past this line */
+#endif /* PNG_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/misc/winutils/include/zlib.h Wed Oct 24 13:21:18 2012 +0100
@@ -0,0 +1,1613 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+ version 1.2.5, April 19th, 2010
+
+ Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
+ (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.5"
+#define ZLIB_VERNUM 0x1250
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 5
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed data.
+ This version of the library supports only one compression method (deflation)
+ but other algorithms will be added later and will have the same stream
+ interface.
+
+ Compression can be done in a single step if the buffers are large enough,
+ or can be done by repeated calls of the compression function. In the latter
+ case, the application must provide more input and/or consume the output
+ (providing more output space) before each call.
+
+ The compressed data format used by default by the in-memory functions is
+ the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+ around a deflate stream, which is itself documented in RFC 1951.
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio using the functions that start
+ with "gz". The gzip format is different from the zlib format. gzip is a
+ gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+ This library can optionally read and write gzip streams in memory as well.
+
+ The zlib format was designed to be compact and fast for use in memory
+ and on communications channels. The gzip format was designed for single-
+ file compression on file systems, has a larger header than zlib to maintain
+ directory information, and uses a different, slower check method than zlib.
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never crash
+ even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void (*free_func) OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ Bytef *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total nb of input bytes read so far */
+
+ Bytef *next_out; /* next output byte should be put there */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total nb of bytes output so far */
+
+ char *msg; /* last error message, NULL if no error */
+ struct internal_state FAR *state; /* not visible by applications */
+
+ alloc_func zalloc; /* used to allocate the internal state */
+ free_func zfree; /* used to free the internal state */
+ voidpf opaque; /* private data object passed to zalloc and zfree */
+
+ int data_type; /* best guess about the data type: binary or text */
+ uLong adler; /* adler32 value of the uncompressed data */
+ uLong reserved; /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+ gzip header information passed to and from zlib routines. See RFC 1952
+ for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+ int text; /* true if compressed data believed to be text */
+ uLong time; /* modification time */
+ int xflags; /* extra flags (not used when writing a gzip file) */
+ int os; /* operating system */
+ Bytef *extra; /* pointer to extra field or Z_NULL if none */
+ uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
+ uInt extra_max; /* space at extra (only when reading header) */
+ Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
+ uInt name_max; /* space at name (only when reading header) */
+ Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
+ uInt comm_max; /* space at comment (only when reading header) */
+ int hcrc; /* true if there was or will be a header crc */
+ int done; /* true when done reading gzip header (not used
+ when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+ The application must update next_in and avail_in when avail_in has dropped
+ to zero. It must update next_out and avail_out when avail_out has dropped
+ to zero. The application must initialize zalloc, zfree and opaque before
+ calling the init function. All other fields are set by the compression
+ library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return Z_NULL if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, zalloc and zfree must be
+ thread safe.
+
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this if
+ the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers
+ returned by zalloc for objects of exactly 65536 bytes *must* have their
+ offset normalized to zero. The default allocation function provided by this
+ library ensures this (see zutil.c). To reduce memory requirements and avoid
+ any allocation of 64K objects, at the expense of compression ratio, compile
+ the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or progress
+ reports. After compression, total_in holds the total size of the
+ uncompressed data and may be saved for use in the decompressor (particularly
+ if the decompressor wants to decompress everything in a single step).
+*/
+
+ /* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH 2
+#define Z_FULL_FLUSH 3
+#define Z_FINISH 4
+#define Z_BLOCK 5
+#define Z_TREES 6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_NEED_DICT 2
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION 0
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_RLE 3
+#define Z_FIXED 4
+#define Z_DEFAULT_STRATEGY 0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY 0
+#define Z_TEXT 1
+#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN 2
+/* Possible values of the data_type field (though see inflate()) */
+
+#define Z_DEFLATED 8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+ /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is not
+ compatible with the zlib.h header file used by the application. This check
+ is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller. If
+ zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+ allocation functions.
+
+ The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at all
+ (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION
+ requests a default compromise between speed and compression (currently
+ equivalent to level 6).
+
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if level is not a valid compression level, or
+ Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION). msg is set to null
+ if there is no error message. deflateInit does not perform any compression:
+ this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+ deflate compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. deflate performs one or both of the
+ following actions:
+
+ - Compress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in and avail_in are updated and
+ processing will resume at this point for the next call of deflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications). Some
+ output may be provided even if flush is not set.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating avail_in or avail_out accordingly; avail_out should
+ never be zero before the call. The application can consume the compressed
+ output when it wants, for example when the output buffer is full (avail_out
+ == 0), or after each call of deflate(). If deflate returns Z_OK and with
+ zero avail_out, it must be called again after making room in the output
+ buffer because there might be more output pending.
+
+ Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+ decide how much data to accumulate before producing output, in order to
+ maximize compression.
+
+ If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In
+ particular avail_in is zero after the call if enough output space has been
+ provided before the call.) Flushing may degrade compression for some
+ compression algorithms and so it should be used only when necessary. This
+ completes the current deflate block and follows it with an empty stored block
+ that is three bits plus filler bits to the next byte, followed by four bytes
+ (00 00 ff ff).
+
+ If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+ output buffer, but the output is not aligned to a byte boundary. All of the
+ input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+ This completes the current deflate block and follows it with an empty fixed
+ codes block that is 10 bits long. This assures that enough bytes are output
+ in order for the decompressor to finish the block before the empty fixed code
+ block.
+
+ If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+ for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+ seven bits of the current block are held to be written as the next byte after
+ the next deflate block is completed. In this case, the decompressor may not
+ be provided enough bits at this point in order to complete decompression of
+ the data provided so far to the compressor. It may need to wait for the next
+ block to be emitted. This is for advanced applications that need to control
+ the emission of deflate blocks.
+
+ If flush is set to Z_FULL_FLUSH, all output is flushed as with
+ Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+ compression.
+
+ If deflate returns with avail_out == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ avail_out), until the flush is complete (deflate returns with non-zero
+ avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+ avail_out is greater than six to avoid repeated flush markers due to
+ avail_out == 0 on return.
+
+ If the parameter flush is set to Z_FINISH, pending input is processed,
+ pending output is flushed and deflate returns with Z_STREAM_END if there was
+ enough output space; if deflate returns with Z_OK, this function must be
+ called again with Z_FINISH and more output space (updated avail_out) but no
+ more input data, until it returns with Z_STREAM_END or an error. After
+ deflate has returned Z_STREAM_END, the only possible operations on the stream
+ are deflateReset or deflateEnd.
+
+ Z_FINISH can be used immediately after deflateInit if all the compression
+ is to be done in a single step. In this case, avail_out must be at least the
+ value returned by deflateBound (see below). If deflate does not return
+ Z_STREAM_END, then it must be called again as described above.
+
+ deflate() sets strm->adler to the adler32 checksum of all input read
+ so far (that is, total_in bytes).
+
+ deflate() may update strm->data_type if it can make a good guess about
+ the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect the
+ compression algorithm in any manner.
+
+ deflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if all input has been
+ consumed and all output has been produced (only when flush is set to
+ Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+ if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
+ (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
+ fatal, and deflate() can be called again with more input and more output
+ space to continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+ stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+ prematurely (some input or output was discarded). In the error case, msg
+ may be set but then points to a static string (which must not be
+ deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+ Initializes the internal stream state for decompression. The fields
+ next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+ the caller. If next_in is not Z_NULL and avail_in is large enough (the
+ exact value depends on the compression method), inflateInit determines the
+ compression method from the zlib header and allocates all data structures
+ accordingly; otherwise the allocation will be deferred to the first call of
+ inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+ use default allocation functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit() does not process any header information -- that is deferred
+ until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+ inflate decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. inflate performs one or both of the
+ following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing will
+ resume at this point for the next call of inflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() provides as much output as possible, until there is
+ no more input data or no more space in the output buffer (see below about
+ the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating the next_* and avail_* values accordingly. The
+ application can consume the uncompressed output when it wants, for example
+ when the output buffer is full (avail_out == 0), or after each call of
+ inflate(). If inflate returns Z_OK and with zero avail_out, it must be
+ called again after making room in the output buffer because there might be
+ more output pending.
+
+ The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+ Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much
+ output as possible to the output buffer. Z_BLOCK requests that inflate()
+ stop if and when it gets to the next deflate block boundary. When decoding
+ the zlib or gzip format, this will cause inflate() to return immediately
+ after the header and before the first block. When doing a raw inflate,
+ inflate() will go ahead and process the first block, and will return when it
+ gets to the end of that block, or when it runs out of data.
+
+ The Z_BLOCK option assists in appending to or combining deflate streams.
+ Also to assist in this, on return inflate() will set strm->data_type to the
+ number of unused bits in the last byte taken from strm->next_in, plus 64 if
+ inflate() is currently decoding the last block in the deflate stream, plus
+ 128 if inflate() returned immediately after decoding an end-of-block code or
+ decoding the complete header up to just before the first byte of the deflate
+ stream. The end-of-block will not be indicated until all of the uncompressed
+ data from that block has been written to strm->next_out. The number of
+ unused bits may in general be greater than seven, except when bit 7 of
+ data_type is set, in which case the number of unused bits will be less than
+ eight. data_type is set as noted here every time inflate() returns for all
+ flush options, and so can be used to determine the amount of currently
+ consumed input in bits.
+
+ The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+ end of each deflate block header is reached, before any actual data in that
+ block is decoded. This allows the caller to determine the length of the
+ deflate block header for later use in random access within a deflate block.
+ 256 is added to the value of strm->data_type when inflate() returns
+ immediately after reaching the end of the deflate block header.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step (a
+ single call of inflate), the parameter flush should be set to Z_FINISH. In
+ this case all pending input is processed and all pending output is flushed;
+ avail_out must be large enough to hold all the uncompressed data. (The size
+ of the uncompressed data may have been saved by the compressor for this
+ purpose.) The next operation on this stream must be inflateEnd to deallocate
+ the decompression state. The use of Z_FINISH is never required, but can be
+ used to inform inflate that a faster approach may be used for the single
+ inflate() call.
+
+ In this implementation, inflate() always flushes as much output as
+ possible to the output buffer, and always uses the faster approach on the
+ first call. So the only effect of the flush parameter in this implementation
+ is on the return value of inflate(), as noted below, or when it returns early
+ because Z_BLOCK or Z_TREES is used.
+
+ If a preset dictionary is needed after this call (see inflateSetDictionary
+ below), inflate sets strm->adler to the adler32 checksum of the dictionary
+ chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+ strm->adler to the adler32 checksum of all output produced so far (that is,
+ total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+ below. At the end of the stream, inflate() checks that its computed adler32
+ checksum is equal to that saved by the compressor and returns Z_STREAM_END
+ only if the checksum is correct.
+
+ inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+ deflate data. The header type is detected automatically, if requested when
+ initializing with inflateInit2(). Any information contained in the gzip
+ header is not retained, so applications that need that information should
+ instead use raw inflate, see inflateInit2() below, or inflateBack() and
+ perform their own processing of the gzip header and trailer.
+
+ inflate() returns Z_OK if some progress has been made (more input processed
+ or more output produced), Z_STREAM_END if the end of the compressed data has
+ been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+ preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect check
+ value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+ next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
+ Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+ output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+ inflate() can be called again with more input and more output space to
+ continue decompressing. If Z_DATA_ERROR is returned, the application may
+ then call inflateSync() to look for a good compression block if a partial
+ recovery of the data is desired.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+ was inconsistent. In the error case, msg may be set but then points to a
+ static string (which must not be deallocated).
+*/
+
+
+ /* Advanced functions */
+
+/*
+ The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+ int level,
+ int method,
+ int windowBits,
+ int memLevel,
+ int strategy));
+
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by the
+ caller.
+
+ The method parameter is the compression method. It must be Z_DEFLATED in
+ this version of the library.
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ deflateInit is used instead.
+
+ windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
+ determines the window size. deflate() will then generate raw deflate data
+ with no zlib header or trailer, and will not compute an adler32 check value.
+
+ windowBits can also be greater than 15 for optional gzip encoding. Add
+ 16 to windowBits to write a simple gzip header and trailer around the
+ compressed data instead of a zlib wrapper. The gzip header will have no
+ file name, no extra data, no comment, no modification time (set to zero), no
+ header crc, and the operating system will be set to 255 (unknown). If a
+ gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression state. memLevel=1 uses minimum memory but is
+ slow and reduces compression ratio; memLevel=9 uses maximum memory for
+ optimal speed. The default value is 8. See zconf.h for total memory usage
+ as a function of windowBits and memLevel.
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+ filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+ string match), or Z_RLE to limit match distances to one (run-length
+ encoding). Filtered data consists mostly of small values with a somewhat
+ random distribution. In this case, the compression algorithm is tuned to
+ compress them better. The effect of Z_FILTERED is to force more Huffman
+ coding and less string matching; it is somewhat intermediate between
+ Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as
+ fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The
+ strategy parameter only affects the compression ratio but not the
+ correctness of the compressed output even if it is not set appropriately.
+ Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+ decoder for special applications.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+ method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+ incompatible with the version assumed by the caller (ZLIB_VERSION). msg is
+ set to null if there is no error message. deflateInit2 does not perform any
+ compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. This function must be called
+ immediately after deflateInit, deflateInit2 or deflateReset, before any call
+ of deflate. The compressor and decompressor must use exactly the same
+ dictionary (see inflateSetDictionary).
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy; the data can then be compressed better than
+ with the default empty dictionary.
+
+ Depending on the size of the compression data structures selected by
+ deflateInit or deflateInit2, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size
+ provided in deflateInit or deflateInit2. Thus the strings most likely to be
+ useful should be put at the end of the dictionary, not at the front. In
+ addition, the current implementation of deflate will use at most the window
+ size minus 262 bytes of the provided dictionary.
+
+ Upon return of this function, strm->adler is set to the adler32 value
+ of the dictionary; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.) If a raw deflate was requested, then the
+ adler32 value is not computed and strm->adler is not set.
+
+ deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent (for example if deflate has already been called for this stream
+ or if the compression method is bsort). deflateSetDictionary does not
+ perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling deflateEnd. Note that deflateCopy duplicates the internal
+ compression state which can be quite large, so this strategy is slow and can
+ consume lots of memory.
+
+ deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to deflateEnd followed by deflateInit,
+ but does not free and reallocate all the internal compression state. The
+ stream will keep the same compression level and any other attributes that
+ may have been set by deflateInit2.
+
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+ int level,
+ int strategy));
+/*
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in deflateInit2. This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different strategy.
+ If the compression level is changed, the input available so far is
+ compressed with the old level (and may be flushed); the new level will take
+ effect only at the next call of deflate().
+
+ Before the call of deflateParams, the stream state must be set as for
+ a call of deflate(), since the currently available input may have to be
+ compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+ deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+ stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
+ strm->avail_out was zero.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+ int good_length,
+ int max_lazy,
+ int nice_length,
+ int max_chain));
+/*
+ Fine tune deflate's internal compression parameters. This should only be
+ used by someone who understands the algorithm used by zlib's deflate for
+ searching for the best matching string, and even then only by the most
+ fanatic optimizer trying to squeeze out the last compressed bit for their
+ specific input data. Read the deflate.c source code for the meaning of the
+ max_lazy, good_length, nice_length, and max_chain parameters.
+
+ deflateTune() can be called after deflateInit() or deflateInit2(), and
+ returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+ uLong sourceLen));
+/*
+ deflateBound() returns an upper bound on the compressed size after
+ deflation of sourceLen bytes. It must be called after deflateInit() or
+ deflateInit2(), and after deflateSetHeader(), if used. This would be used
+ to allocate an output buffer for deflation in a single pass, and so would be
+ called before deflate().
+*/
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ deflatePrime() inserts bits in the deflate output stream. The intent
+ is that this function is used to start off the deflate output with the bits
+ leftover from a previous deflate stream when appending to it. As such, this
+ function can only be used for raw deflate, and must be used before the first
+ deflate() call after a deflateInit2() or deflateReset(). bits must be less
+ than or equal to 16, and that many of the least significant bits of value
+ will be inserted in the output.
+
+ deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ deflateSetHeader() provides gzip header information for when a gzip
+ stream is requested by deflateInit2(). deflateSetHeader() may be called
+ after deflateInit2() or deflateReset() and before the first call of
+ deflate(). The text, time, os, extra field, name, and comment information
+ in the provided gz_header structure are written to the gzip header (xflag is
+ ignored -- the extra flags are set according to the compression level). The
+ caller must assure that, if not Z_NULL, name and comment are terminated with
+ a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+ available there. If hcrc is true, a gzip header crc is included. Note that
+ the current versions of the command-line version of gzip (up through version
+ 1.3.x) do not support header crc's, and will report that it is a "multi-part
+ gzip file" and give up.
+
+ If deflateSetHeader is not used, the default gzip header has text false,
+ the time set to zero, and os set to 255, with no extra, name, or comment
+ fields. The gzip header is returned to the default state by deflateReset().
+
+ deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+ int windowBits));
+
+ This is another version of inflateInit with an extra parameter. The
+ fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+ before by the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if inflateInit is used
+ instead. windowBits must be greater than or equal to the windowBits value
+ provided to deflateInit2() while compressing, or it must be equal to 15 if
+ deflateInit2() was not used. If a compressed stream with a larger window
+ size is given as input, inflate() will return with the error code
+ Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ windowBits can also be zero to request that inflate use the window size in
+ the zlib header of the compressed stream.
+
+ windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+ determines the window size. inflate() will then process raw deflate data,
+ not looking for a zlib or gzip header, not generating a check value, and not
+ looking for any check values for comparison at the end of the stream. This
+ is for use with other formats that use the deflate compressed data format
+ such as zip. Those formats provide their own check values. If a custom
+ format is developed using the raw deflate format for compressed data, it is
+ recommended that a check value such as an adler32 or a crc32 be applied to
+ the uncompressed data as is done in the zlib, gzip, and zip formats. For
+ most applications, the zlib format should be used as is. Note that comments
+ above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+ windowBits can also be greater than 15 for optional gzip decoding. Add
+ 32 to windowBits to enable zlib and gzip decoding with automatic header
+ detection, or add 16 to decode only the gzip format (the zlib format will
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
+ crc32 instead of an adler32.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit2 does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit2() does not process any header information -- that is
+ deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the adler32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called
+ immediately after inflateInit2() or inflateReset() and before any call of
+ inflate() to set the dictionary. The application must insure that the
+ dictionary that was used for compression is provided.
+
+ inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+ expected one (incorrect adler32 value). inflateSetDictionary does not
+ perform any decompression: this will be done by subsequent calls of
+ inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+ Skips invalid compressed data until a full flush point (see above the
+ description of deflate with Z_FULL_FLUSH) can be found, or until all
+ available input is skipped. No output is provided.
+
+ inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+ if no more input was provided, Z_DATA_ERROR if no flush point has been
+ found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the
+ success case, the application may save the current current value of total_in
+ which indicates where valid compressed data was found. In the error case,
+ the application may repeatedly call inflateSync, providing more input each
+ time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when randomly accessing a large stream. The
+ first pass through the stream can periodically record the inflate state,
+ allowing restarting inflate at those points when randomly accessing the
+ stream.
+
+ inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate all the internal decompression state. The
+ stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+ int windowBits));
+/*
+ This function is the same as inflateReset, but it also permits changing
+ the wrap and window size requests. The windowBits parameter is interpreted
+ the same as it is for inflateInit2.
+
+ inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+ the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ This function inserts bits in the inflate input stream. The intent is
+ that this function is used to start inflating at a bit position in the
+ middle of a byte. The provided bits will be used before any bytes are used
+ from next_in. This function should only be used with raw inflate, and
+ should be used before the first inflate() call after inflateInit2() or
+ inflateReset(). bits must be less than or equal to 16, and that many of the
+ least significant bits of value will be inserted in the input.
+
+ If bits is negative, then the input stream bit buffer is emptied. Then
+ inflatePrime() can be called again to put bits in the buffer. This is used
+ to clear out bits leftover after feeding inflate a block description prior
+ to feeding inflate codes.
+
+ inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+ This function returns two values, one in the lower 16 bits of the return
+ value, and the other in the remaining upper bits, obtained by shifting the
+ return value down 16 bits. If the upper value is -1 and the lower value is
+ zero, then inflate() is currently decoding information outside of a block.
+ If the upper value is -1 and the lower value is non-zero, then inflate is in
+ the middle of a stored block, with the lower value equaling the number of
+ bytes from the input remaining to copy. If the upper value is not -1, then
+ it is the number of bits back from the current bit position in the input of
+ the code (literal or length/distance pair) currently being processed. In
+ that case the lower value is the number of bytes already emitted for that
+ code.
+
+ A code is being processed if inflate is waiting for more input to complete
+ decoding of the code, or if it has completed decoding but is waiting for
+ more output space to write the literal or match data.
+
+ inflateMark() is used to mark locations in the input data for random
+ access, which may be at bit positions, and to note those cases where the
+ output of a code may span boundaries of random access blocks. The current
+ location in the input stream can be determined from avail_in and data_type
+ as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+ inflateMark returns the value noted above or -1 << 16 if the provided
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ inflateGetHeader() requests that gzip header information be stored in the
+ provided gz_header structure. inflateGetHeader() may be called after
+ inflateInit2() or inflateReset(), and before the first call of inflate().
+ As inflate() processes the gzip stream, head->done is zero until the header
+ is completed, at which time head->done is set to one. If a zlib stream is
+ being decoded, then head->done is set to -1 to indicate that there will be
+ no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be
+ used to force inflate() to return immediately after header processing is
+ complete and before any actual data is decompressed.
+
+ The text, time, xflags, and os fields are filled in with the gzip header
+ contents. hcrc is set to true if there is a header CRC. (The header CRC
+ was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+ contains the maximum number of bytes to write to extra. Once done is true,
+ extra_len contains the actual extra field length, and extra contains the
+ extra field, or that field truncated if extra_max is less than extra_len.
+ If name is not Z_NULL, then up to name_max characters are written there,
+ terminated with a zero unless the length is greater than name_max. If
+ comment is not Z_NULL, then up to comm_max characters are written there,
+ terminated with a zero unless the length is greater than comm_max. When any
+ of extra, name, or comment are not Z_NULL and the respective field is not
+ present in the header, then that field is set to Z_NULL to signal its
+ absence. This allows the use of deflateSetHeader() with the returned
+ structure to duplicate the header. However if those fields are set to
+ allocated memory, then the application will need to save those pointers
+ elsewhere so that they can be eventually freed.
+
+ If inflateGetHeader is not used, then the header information is simply
+ discarded. The header is always checked for validity, including the header
+ CRC if present. inflateReset() will reset the process to discard the header
+ information. The application would need to call inflateGetHeader() again to
+ retrieve the header from the next gzip stream.
+
+ inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window));
+
+ Initialize the internal stream state for decompression using inflateBack()
+ calls. The fields zalloc, zfree and opaque in strm must be initialized
+ before the call. If zalloc and zfree are Z_NULL, then the default library-
+ derived memory allocation routines are used. windowBits is the base two
+ logarithm of the window size, in the range 8..15. window is a caller
+ supplied buffer of that size. Except for special applications where it is
+ assured that deflate was used with small window sizes, windowBits must be 15
+ and a 32K byte window must be supplied to be able to decompress general
+ deflate streams.
+
+ See inflateBack() for the usage of these routines.
+
+ inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+ the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
+ allocated, or Z_VERSION_ERROR if the version of the library does not match
+ the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+ in_func in, void FAR *in_desc,
+ out_func out, void FAR *out_desc));
+/*
+ inflateBack() does a raw inflate with a single call using a call-back
+ interface for input and output. This is more efficient than inflate() for
+ file i/o applications in that it avoids copying between the output and the
+ sliding window by simply making the window itself the output buffer. This
+ function trusts the application to not change the output buffer passed by
+ the output function, at least until inflateBack() returns.
+
+ inflateBackInit() must be called first to allocate the internal state
+ and to initialize the state with the user-provided window buffer.
+ inflateBack() may then be used multiple times to inflate a complete, raw
+ deflate stream with each call. inflateBackEnd() is then called to free the
+ allocated state.
+
+ A raw deflate stream is one with no zlib or gzip header or trailer.
+ This routine would normally be used in a utility that reads zip or gzip
+ files and writes out uncompressed files. The utility would decode the
+ header and process the trailer on its own, hence this routine expects only
+ the raw deflate stream to decompress. This is different from the normal
+ behavior of inflate(), which expects either a zlib or gzip header and
+ trailer around the deflate stream.
+
+ inflateBack() uses two subroutines supplied by the caller that are then
+ called by inflateBack() for input and output. inflateBack() calls those
+ routines until it reads a complete deflate stream and writes out all of the
+ uncompressed data, or until it encounters an error. The function's
+ parameters and return types are defined above in the in_func and out_func
+ typedefs. inflateBack() will call in(in_desc, &buf) which should return the
+ number of bytes of provided input, and a pointer to that input in buf. If
+ there is no input available, in() must return zero--buf is ignored in that
+ case--and inflateBack() will return a buffer error. inflateBack() will call
+ out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out()
+ should return zero on success, or non-zero on failure. If out() returns
+ non-zero, inflateBack() will return with an error. Neither in() nor out()
+ are permitted to change the contents of the window provided to
+ inflateBackInit(), which is also the buffer that out() uses to write from.
+ The length written by out() will be at most the window size. Any non-zero
+ amount of input may be provided by in().
+
+ For convenience, inflateBack() can be provided input on the first call by
+ setting strm->next_in and strm->avail_in. If that input is exhausted, then
+ in() will be called. Therefore strm->next_in must be initialized before
+ calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
+ immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
+ must also be initialized, and then if strm->avail_in is not zero, input will
+ initially be taken from strm->next_in[0 .. strm->avail_in - 1].
+
+ The in_desc and out_desc parameters of inflateBack() is passed as the
+ first parameter of in() and out() respectively when they are called. These
+ descriptors can be optionally used to pass any information that the caller-
+ supplied in() and out() functions need to do their job.
+
+ On return, inflateBack() will set strm->next_in and strm->avail_in to
+ pass back any unused input that was provided by the last in() call. The
+ return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+ if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+ in the deflate stream (in which case strm->msg is set to indicate the nature
+ of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+ In the case of Z_BUF_ERROR, an input or output error can be distinguished
+ using strm->next_in which will be Z_NULL only if in() returned an error. If
+ strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+ non-zero. (in() will always be called before out(), so strm->next_in is
+ assured to be defined if out() returns non-zero.) Note that inflateBack()
+ cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+ All memory allocated by inflateBackInit() is freed.
+
+ inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+ state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+ Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+ 1.0: size of uInt
+ 3.2: size of uLong
+ 5.4: size of voidpf (pointer)
+ 7.6: size of z_off_t
+
+ Compiler, assembler, and debug options:
+ 8: DEBUG
+ 9: ASMV or ASMINF -- use ASM code
+ 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+ 11: 0 (reserved)
+
+ One-time table building (smaller code, but not thread-safe if true):
+ 12: BUILDFIXED -- build static block decoding tables when needed
+ 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+ 14,15: 0 (reserved)
+
+ Library content (indicates missing functionality):
+ 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+ deflate code when not needed)
+ 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+ and decode gzip streams (to avoid linking crc code)
+ 18-19: 0 (reserved)
+
+ Operation variations (changes in library functionality):
+ 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+ 21: FASTEST -- deflate algorithm with only one, lowest compression level
+ 22,23: 0 (reserved)
+
+ The sprintf variant used by gzprintf (zero is best):
+ 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+ 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+ 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+ Remainder:
+ 27-31: 0 (reserved)
+ */
+
+
+ /* utility functions */
+
+/*
+ The following utility functions are implemented on top of the basic
+ stream-oriented functions. To simplify the interface, some default options
+ are assumed (compression level and memory usage, standard memory allocation
+ functions). The source code of these utility functions can be modified if
+ you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed buffer.
+
+ compress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen,
+ int level));
+/*
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in deflateInit. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed buffer.
+
+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+ Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+ compressBound() returns an upper bound on the compressed size after
+ compress() or compress2() on sourceLen bytes. It would be used before a
+ compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be large enough to hold the entire
+ uncompressed data. (The size of the uncompressed data must have been saved
+ previously by the compressor and transmitted to the decompressor by some
+ mechanism outside the scope of this compression library.) Upon exit, destLen
+ is the actual size of the uncompressed buffer.
+
+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
+*/
+
+
+ /* gzip file access functions */
+
+/*
+ This library supports reading and writing files in gzip (.gz) format with
+ an interface similar to that of stdio, using the functions that start with
+ "gz". The gzip format is different from the zlib format. gzip is a gzip
+ wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef voidp gzFile; /* opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+ Opens a gzip (.gz) file for reading or writing. The mode parameter is as
+ in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+ a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+ compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+ for fixed code compression as in "wb9F". (See the description of
+ deflateInit2 for more information about the strategy parameter.) Also "a"
+ can be used instead of "w" to request that the gzip stream that will be
+ written be appended to the file. "+" will result in an error, since reading
+ and writing to the same gzip file is not supported.
+
+ gzopen can be used to read a file which is not in gzip format; in this
+ case gzread will directly read from the file without decompression.
+
+ gzopen returns NULL if the file could not be opened, if there was
+ insufficient memory to allocate the gzFile state, or if an invalid mode was
+ specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+ errno can be checked to determine if the reason gzopen failed was that the
+ file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+ gzdopen associates a gzFile with the file descriptor fd. File descriptors
+ are obtained from calls like open, dup, creat, pipe or fileno (if the file
+ has been previously opened with fopen). The mode parameter is as in gzopen.
+
+ The next call of gzclose on the returned gzFile will also close the file
+ descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+ fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+ mode);. The duplicated descriptor should be saved to avoid a leak, since
+ gzdopen does not close fd if it fails.
+
+ gzdopen returns NULL if there was insufficient memory to allocate the
+ gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+ provided, or '+' was provided), or if fd is -1. The file descriptor is not
+ used until the next gz* read, write, seek, or close operation, so gzdopen
+ will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+ Set the internal buffer size used by this library's functions. The
+ default buffer size is 8192 bytes. This function must be called after
+ gzopen() or gzdopen(), and before any other calls that read or write the
+ file. The buffer memory allocation is always deferred to the first read or
+ write. Two buffers are allocated, either both of the specified size when
+ writing, or one of the specified size and the other twice that size when
+ reading. A larger buffer size of, for example, 64K or 128K bytes will
+ noticeably increase the speed of decompression (reading).
+
+ The new buffer size also affects the maximum length for gzprintf().
+
+ gzbuffer() returns 0 on success, or -1 on failure, such as being called
+ too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+ Dynamically update the compression level or strategy. See the description
+ of deflateInit2 for the meaning of these parameters.
+
+ gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+ opened for writing.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+ Reads the given number of uncompressed bytes from the compressed file. If
+ the input file was not in gzip format, gzread copies the given number of
+ bytes into the buffer.
+
+ After reaching the end of a gzip stream in the input, gzread will continue
+ to read, looking for another gzip stream, or failing that, reading the rest
+ of the input file directly without decompression. The entire input file
+ will be read if gzread is called until it returns less than the requested
+ len.
+
+ gzread returns the number of uncompressed bytes actually read, less than
+ len for end of file, or -1 for error.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+ voidpc buf, unsigned len));
+/*
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of uncompressed bytes written or 0 in case of
+ error.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
+/*
+ Converts, formats, and writes the arguments to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written, or 0 in case of error. The number of
+ uncompressed bytes written is limited to 8191, or one less than the buffer
+ size given to gzbuffer(). The caller should assure that this limit is not
+ exceeded. If it is exceeded, then gzprintf() will return an error (0) with
+ nothing written. In this case, there may also be a buffer overflow with
+ unpredictable consequences, which is possible only if zlib was compiled with
+ the insecure functions sprintf() or vsprintf() because the secure snprintf()
+ or vsnprintf() functions were not available. This can be determined using
+ zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+ Reads bytes from the compressed file until len-1 characters are read, or a
+ newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. If any characters are read or if len == 1, the
+ string is terminated with a null character. If no characters are read due
+ to an end-of-file or len < 1, then the buffer is left untouched.
+
+ gzgets returns buf which is a null-terminated string, or it returns NULL
+ for end-of-file or in case of error. If there was an error, the contents at
+ buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+ Writes c, converted to an unsigned char, into the compressed file. gzputc
+ returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+ Reads one byte from the compressed file. gzgetc returns this byte or -1
+ in case of end of file or error.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+ Push one character back onto the stream to be read as the first character
+ on the next read. At least one character of push-back is allowed.
+ gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
+ fail if c is -1, and may fail if a character has been pushed but not read
+ yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
+ output buffer size of pushed characters is allowed. (See gzbuffer above.)
+ The pushed character will be discarded if the stream is repositioned with
+ gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+ Flushes all pending output into the compressed file. The parameter flush
+ is as in the deflate() function. The return value is the zlib error number
+ (see function gzerror below). gzflush is only permitted when writing.
+
+ If the flush parameter is Z_FINISH, the remaining data is written and the
+ gzip stream is completed in the output. If gzwrite() is called again, a new
+ gzip stream will be started in the output. gzread() is able to read such
+ concatented gzip streams.
+
+ gzflush should be called only when strictly necessary because it will
+ degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+ z_off_t offset, int whence));
+
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
+ the value SEEK_END is not supported.
+
+ If the file is opened for reading, this function is emulated but can be
+ extremely slow. If the file is opened for writing, only forward seeks are
+ supported; gzseek then compresses a sequence of zeroes up to the new
+ starting position.
+
+ gzseek returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error, in
+ particular if the file is opened for writing and the new starting position
+ would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
+/*
+ Rewinds the given file. This function is supported only for reading.
+
+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
+
+ Returns the starting position for the next gzread or gzwrite on the given
+ compressed file. This position represents a number of bytes in the
+ uncompressed data stream, and is zero when starting, even if appending or
+ reading a gzip stream from the middle of a file using gzdopen().
+
+ gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+ Returns the current offset in the file being read or written. This offset
+ includes the count of bytes that precede the gzip stream, for example when
+ appending or when using gzdopen() for reading. When reading, the offset
+ does not include as yet unused buffered input. This information can be used
+ for a progress indicator. On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+ Returns true (1) if the end-of-file indicator has been set while reading,
+ false (0) otherwise. Note that the end-of-file indicator is set only if the
+ read tried to go past the end of the input, but came up short. Therefore,
+ just like feof(), gzeof() may return false even if there is no more data to
+ read, in the event that the last read request was for the exact number of
+ bytes remaining in the input file. This will happen if the input file size
+ is an exact multiple of the buffer size.
+
+ If gzeof() returns true, then the read functions will return no more data,
+ unless the end-of-file indicator is reset by gzclearerr() and the input file
+ has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+ Returns true (1) if file is being copied directly while reading, or false
+ (0) if file is a gzip stream being decompressed. This state can change from
+ false to true while reading the input file if the end of a gzip stream is
+ reached, but is followed by data that is not another gzip stream.
+
+ If the input file is empty, gzdirect() will return true, since the input
+ does not contain a gzip stream.
+
+ If gzdirect() is used immediately after gzopen() or gzdopen() it will
+ cause buffers to be allocated to allow reading the file to determine if it
+ is a gzip file. Therefore if gzbuffer() is used, it should be called before
+ gzdirect().
+*/
+
+ZEXTERN int ZEXPORT gzclose OF((gzFile file));
+/*
+ Flushes all pending output if necessary, closes the compressed file and
+ deallocates the (de)compression state. Note that once file is closed, you
+ cannot call gzerror with file, since its structures have been deallocated.
+ gzclose must not be called more than once on the same file, just as free
+ must not be called more than once on the same allocation.
+
+ gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+ file operation error, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+ Same as gzclose(), but gzclose_r() is only for use when reading, and
+ gzclose_w() is only for use when writing or appending. The advantage to
+ using these instead of gzclose() is that they avoid linking in zlib
+ compression or decompression code that is not used when only reading or only
+ writing respectively. If gzclose() is used, then both compression and
+ decompression code will be included the application when linking to a static
+ zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+ Returns the error message for the last error which occurred on the given
+ compressed file. errnum is set to zlib error number. If an error occurred
+ in the file system and not in the compression library, errnum is set to
+ Z_ERRNO and the application may consult errno to get the exact error code.
+
+ The application must not modify the returned string. Future calls to
+ this function may invalidate the previously returned string. If file is
+ closed, then the string previously returned by gzerror will no longer be
+ available.
+
+ gzerror() should be used to distinguish errors from end-of-file for those
+ functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+ Clears the error and end-of-file flags for file. This is analogous to the
+ clearerr() function in stdio. This is useful for continuing to read a gzip
+ file that is being written concurrently.
+*/
+
+
+ /* checksum functions */
+
+/*
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the compression
+ library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is Z_NULL, this function returns the
+ required initial value for the checksum.
+
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster.
+
+ Usage example:
+
+ uLong adler = adler32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+ z_off_t len2));
+
+ Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
+ and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+ each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
+ seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+*/
+
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+/*
+ Update a running CRC-32 with the bytes buf[0..len-1] and return the
+ updated CRC-32. If buf is Z_NULL, this function returns the required
+ initial value for the for the crc. Pre- and post-conditioning (one's
+ complement) is performed within this function so it shouldn't be done by the
+ application.
+
+ Usage example:
+
+ uLong crc = crc32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = crc32(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+ Combine two CRC-32 check values into one. For two sequences of bytes,
+ seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+ calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
+ check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+ len2.
+*/
+
+
+ /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
+ int windowBits, int memLevel,
+ int strategy, const char *version,
+ int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window,
+ const char *version,
+ int stream_size));
+#define deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+ (strategy), ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+#define inflateBackInit(strm, windowBits, window) \
+ inflateBackInit_((strm), (windowBits), (window), \
+ ZLIB_VERSION, sizeof(z_stream))
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+ ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+# define gzopen gzopen64
+# define gzseek gzseek64
+# define gztell gztell64
+# define gzoffset gzoffset64
+# define adler32_combine adler32_combine64
+# define crc32_combine crc32_combine64
+# ifdef _LARGEFILE64_SOURCE
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+# endif
+#else
+ ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+/* hack for buggy compilers */
+#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
+ struct internal_state {int dummy;};
+#endif
+
+/* undocumented functions */
+ZEXTERN const char * ZEXPORT zError OF((int));
+ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
+ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */