So. A while ago, while trying to prevent hogs blowtorching getting turned around, unc0rr altered the old range of blowtorch from 1/8th of 180° up or down, to a 4° gain in upwards and a -4° loss in downwards. He also made it so that starting tunnels could fail to erase sufficient terrain, trapping hogs. Here are a couple of workarounds to more closely approximate old behaviour (do some initial erasure, adjust min/max angles)
/***************************************************************************/
/* */
/* cidparse.c */
/* */
/* CID-keyed Type1 parser (body). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#include <ft2build.h>
#include FT_INTERNAL_DEBUG_H
#include FT_INTERNAL_OBJECTS_H
#include FT_INTERNAL_STREAM_H
#include "cidparse.h"
#include "ciderrs.h"
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cidparse
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** INPUT STREAM PARSER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( FT_Error )
cid_parser_new( CID_Parser* parser,
FT_Stream stream,
FT_Memory memory,
PSAux_Service psaux )
{
FT_Error error;
FT_ULong base_offset, offset, ps_len;
FT_Byte *cur, *limit;
FT_Byte *arg1, *arg2;
FT_MEM_ZERO( parser, sizeof ( *parser ) );
psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );
parser->stream = stream;
base_offset = FT_STREAM_POS();
/* first of all, check the font format in the header */
if ( FT_FRAME_ENTER( 31 ) )
goto Exit;
if ( ft_strncmp( (char *)stream->cursor,
"%!PS-Adobe-3.0 Resource-CIDFont", 31 ) )
{
FT_TRACE2(( "[not a valid CID-keyed font]\n" ));
error = CID_Err_Unknown_File_Format;
}
FT_FRAME_EXIT();
if ( error )
goto Exit;
Again:
/* now, read the rest of the file until we find */
/* `StartData' or `/sfnts' */
{
FT_Byte buffer[256 + 10];
FT_Long read_len = 256 + 10; /* same as signed FT_Stream->size */
FT_Byte* p = buffer;
for ( offset = FT_STREAM_POS(); ; offset += 256 )
{
FT_Long stream_len; /* same as signed FT_Stream->size */
stream_len = stream->size - FT_STREAM_POS();
if ( stream_len == 0 )
{
FT_TRACE2(( "cid_parser_new: no `StartData' keyword found\n" ));
error = CID_Err_Unknown_File_Format;
goto Exit;
}
read_len = FT_MIN( read_len, stream_len );
if ( FT_STREAM_READ( p, read_len ) )
goto Exit;
if ( read_len < 256 )
p[read_len] = '\0';
limit = p + read_len - 10;
for ( p = buffer; p < limit; p++ )
{
if ( p[0] == 'S' && ft_strncmp( (char*)p, "StartData", 9 ) == 0 )
{
/* save offset of binary data after `StartData' */
offset += p - buffer + 10;
goto Found;
}
else if ( p[1] == 's' && ft_strncmp( (char*)p, "/sfnts", 6 ) == 0 )
{
offset += p - buffer + 7;
goto Found;
}
}
FT_MEM_MOVE( buffer, p, 10 );
read_len = 256;
p = buffer + 10;
}
}
Found:
/* We have found the start of the binary data or the `/sfnts' token. */
/* Now rewind and extract the frame corresponding to this PostScript */
/* section. */
ps_len = offset - base_offset;
if ( FT_STREAM_SEEK( base_offset ) ||
FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
goto Exit;
parser->data_offset = offset;
parser->postscript_len = ps_len;
parser->root.base = parser->postscript;
parser->root.cursor = parser->postscript;
parser->root.limit = parser->root.cursor + ps_len;
parser->num_dict = -1;
/* Finally, we check whether `StartData' or `/sfnts' was real -- */
/* it could be in a comment or string. We also get the arguments */
/* of `StartData' to find out whether the data is represented in */
/* binary or hex format. */
arg1 = parser->root.cursor;
cid_parser_skip_PS_token( parser );
cid_parser_skip_spaces ( parser );
arg2 = parser->root.cursor;
cid_parser_skip_PS_token( parser );
cid_parser_skip_spaces ( parser );
limit = parser->root.limit;
cur = parser->root.cursor;
while ( cur < limit )
{
if ( parser->root.error )
{
error = parser->root.error;
goto Exit;
}
if ( cur[0] == 'S' && ft_strncmp( (char*)cur, "StartData", 9 ) == 0 )
{
if ( ft_strncmp( (char*)arg1, "(Hex)", 5 ) == 0 )
parser->binary_length = ft_atol( (const char *)arg2 );
limit = parser->root.limit;
cur = parser->root.cursor;
goto Exit;
}
else if ( cur[1] == 's' && ft_strncmp( (char*)cur, "/sfnts", 6 ) == 0 )
{
FT_TRACE2(( "cid_parser_new: cannot handle Type 11 fonts\n" ));
error = CID_Err_Unknown_File_Format;
goto Exit;
}
cid_parser_skip_PS_token( parser );
cid_parser_skip_spaces ( parser );
arg1 = arg2;
arg2 = cur;
cur = parser->root.cursor;
}
/* we haven't found the correct `StartData'; go back and continue */
/* searching */
FT_FRAME_RELEASE( parser->postscript );
if ( !FT_STREAM_SEEK( offset ) )
goto Again;
Exit:
return error;
}
FT_LOCAL_DEF( void )
cid_parser_done( CID_Parser* parser )
{
/* always free the private dictionary */
if ( parser->postscript )
{
FT_Stream stream = parser->stream;
FT_FRAME_RELEASE( parser->postscript );
}
parser->root.funcs.done( &parser->root );
}
/* END */