So. A while ago, while trying to prevent hogs blowtorching getting turned around, unc0rr altered the old range of blowtorch from 1/8th of 180° up or down, to a 4° gain in upwards and a -4° loss in downwards. He also made it so that starting tunnels could fail to erase sufficient terrain, trapping hogs. Here are a couple of workarounds to more closely approximate old behaviour (do some initial erasure, adjust min/max angles)
/***************************************************************************/
/* */
/* ftcmru.h */
/* */
/* Simple MRU list-cache (specification). */
/* */
/* Copyright 2000-2001, 2003, 2004, 2005, 2006, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* An MRU is a list that cannot hold more than a certain number of */
/* elements (`max_elements'). All elements in the list are sorted in */
/* least-recently-used order, i.e., the `oldest' element is at the tail */
/* of the list. */
/* */
/* When doing a lookup (either through `Lookup()' or `Lookup_Node()'), */
/* the list is searched for an element with the corresponding key. If */
/* it is found, the element is moved to the head of the list and is */
/* returned. */
/* */
/* If no corresponding element is found, the lookup routine will try to */
/* obtain a new element with the relevant key. If the list is already */
/* full, the oldest element from the list is discarded and replaced by a */
/* new one; a new element is added to the list otherwise. */
/* */
/* Note that it is possible to pre-allocate the element list nodes. */
/* This is handy if `max_elements' is sufficiently small, as it saves */
/* allocations/releases during the lookup process. */
/* */
/*************************************************************************/
#ifndef __FTCMRU_H__
#define __FTCMRU_H__
#include <ft2build.h>
#include FT_FREETYPE_H
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
#define xxFT_DEBUG_ERROR
#define FTC_INLINE
FT_BEGIN_HEADER
typedef struct FTC_MruNodeRec_* FTC_MruNode;
typedef struct FTC_MruNodeRec_
{
FTC_MruNode next;
FTC_MruNode prev;
} FTC_MruNodeRec;
FT_LOCAL( void )
FTC_MruNode_Prepend( FTC_MruNode *plist,
FTC_MruNode node );
FT_LOCAL( void )
FTC_MruNode_Up( FTC_MruNode *plist,
FTC_MruNode node );
FT_LOCAL( void )
FTC_MruNode_Remove( FTC_MruNode *plist,
FTC_MruNode node );
typedef struct FTC_MruListRec_* FTC_MruList;
typedef struct FTC_MruListClassRec_ const * FTC_MruListClass;
typedef FT_Bool
(*FTC_MruNode_CompareFunc)( FTC_MruNode node,
FT_Pointer key );
typedef FT_Error
(*FTC_MruNode_InitFunc)( FTC_MruNode node,
FT_Pointer key,
FT_Pointer data );
typedef FT_Error
(*FTC_MruNode_ResetFunc)( FTC_MruNode node,
FT_Pointer key,
FT_Pointer data );
typedef void
(*FTC_MruNode_DoneFunc)( FTC_MruNode node,
FT_Pointer data );
typedef struct FTC_MruListClassRec_
{
FT_Offset node_size;
FTC_MruNode_CompareFunc node_compare;
FTC_MruNode_InitFunc node_init;
FTC_MruNode_ResetFunc node_reset;
FTC_MruNode_DoneFunc node_done;
} FTC_MruListClassRec;
typedef struct FTC_MruListRec_
{
FT_UInt num_nodes;
FT_UInt max_nodes;
FTC_MruNode nodes;
FT_Pointer data;
FTC_MruListClassRec clazz;
FT_Memory memory;
} FTC_MruListRec;
FT_LOCAL( void )
FTC_MruList_Init( FTC_MruList list,
FTC_MruListClass clazz,
FT_UInt max_nodes,
FT_Pointer data,
FT_Memory memory );
FT_LOCAL( void )
FTC_MruList_Reset( FTC_MruList list );
FT_LOCAL( void )
FTC_MruList_Done( FTC_MruList list );
FT_LOCAL( FT_Error )
FTC_MruList_New( FTC_MruList list,
FT_Pointer key,
FTC_MruNode *anode );
FT_LOCAL( void )
FTC_MruList_Remove( FTC_MruList list,
FTC_MruNode node );
FT_LOCAL( void )
FTC_MruList_RemoveSelection( FTC_MruList list,
FTC_MruNode_CompareFunc selection,
FT_Pointer key );
#ifdef FTC_INLINE
#define FTC_MRULIST_LOOKUP_CMP( list, key, compare, node, error ) \
FT_BEGIN_STMNT \
FTC_MruNode* _pfirst = &(list)->nodes; \
FTC_MruNode_CompareFunc _compare = (FTC_MruNode_CompareFunc)(compare); \
FTC_MruNode _first, _node; \
\
\
error = FTC_Err_Ok; \
_first = *(_pfirst); \
_node = NULL; \
\
if ( _first ) \
{ \
_node = _first; \
do \
{ \
if ( _compare( _node, (key) ) ) \
{ \
if ( _node != _first ) \
FTC_MruNode_Up( _pfirst, _node ); \
\
node = _node; \
goto _MruOk; \
} \
_node = _node->next; \
\
} while ( _node != _first) ; \
} \
\
error = FTC_MruList_New( (list), (key), (FTC_MruNode*)(void*)&(node) ); \
_MruOk: \
; \
FT_END_STMNT
#define FTC_MRULIST_LOOKUP( list, key, node, error ) \
FTC_MRULIST_LOOKUP_CMP( list, key, (list)->clazz.node_compare, node, error )
#else /* !FTC_INLINE */
FT_LOCAL( FTC_MruNode )
FTC_MruList_Find( FTC_MruList list,
FT_Pointer key );
FT_LOCAL( FT_Error )
FTC_MruList_Lookup( FTC_MruList list,
FT_Pointer key,
FTC_MruNode *pnode );
#define FTC_MRULIST_LOOKUP( list, key, node, error ) \
error = FTC_MruList_Lookup( (list), (key), (FTC_MruNode*)&(node) )
#endif /* !FTC_INLINE */
#define FTC_MRULIST_LOOP( list, node ) \
FT_BEGIN_STMNT \
FTC_MruNode _first = (list)->nodes; \
\
\
if ( _first ) \
{ \
FTC_MruNode _node = _first; \
\
\
do \
{ \
*(FTC_MruNode*)&(node) = _node;
#define FTC_MRULIST_LOOP_END() \
_node = _node->next; \
\
} while ( _node != _first ); \
} \
FT_END_STMNT
/* */
FT_END_HEADER
#endif /* __FTCMRU_H__ */
/* END */