--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/misc/winutils/include/SDL_video.h Sat Jan 14 05:03:21 2012 +0100
@@ -0,0 +1,951 @@
+/*
+ SDL - Simple DirectMedia Layer
+ Copyright (C) 1997-2009 Sam Lantinga
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Sam Lantinga
+ slouken@libsdl.org
+*/
+
+/** @file SDL_video.h
+ * Header file for access to the SDL raw framebuffer window
+ */
+
+#ifndef _SDL_video_h
+#define _SDL_video_h
+
+#include "SDL_stdinc.h"
+#include "SDL_error.h"
+#include "SDL_rwops.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @name Transparency definitions
+ * These define alpha as the opacity of a surface
+ */
+/*@{*/
+#define SDL_ALPHA_OPAQUE 255
+#define SDL_ALPHA_TRANSPARENT 0
+/*@}*/
+
+/** @name Useful data types */
+/*@{*/
+typedef struct SDL_Rect {
+ Sint16 x, y;
+ Uint16 w, h;
+} SDL_Rect;
+
+typedef struct SDL_Color {
+ Uint8 r;
+ Uint8 g;
+ Uint8 b;
+ Uint8 unused;
+} SDL_Color;
+#define SDL_Colour SDL_Color
+
+typedef struct SDL_Palette {
+ int ncolors;
+ SDL_Color *colors;
+} SDL_Palette;
+/*@}*/
+
+/** Everything in the pixel format structure is read-only */
+typedef struct SDL_PixelFormat {
+ SDL_Palette *palette;
+ Uint8 BitsPerPixel;
+ Uint8 BytesPerPixel;
+ Uint8 Rloss;
+ Uint8 Gloss;
+ Uint8 Bloss;
+ Uint8 Aloss;
+ Uint8 Rshift;
+ Uint8 Gshift;
+ Uint8 Bshift;
+ Uint8 Ashift;
+ Uint32 Rmask;
+ Uint32 Gmask;
+ Uint32 Bmask;
+ Uint32 Amask;
+
+ /** RGB color key information */
+ Uint32 colorkey;
+ /** Alpha value information (per-surface alpha) */
+ Uint8 alpha;
+} SDL_PixelFormat;
+
+/** This structure should be treated as read-only, except for 'pixels',
+ * which, if not NULL, contains the raw pixel data for the surface.
+ */
+typedef struct SDL_Surface {
+ Uint32 flags; /**< Read-only */
+ SDL_PixelFormat *format; /**< Read-only */
+ int w, h; /**< Read-only */
+ Uint16 pitch; /**< Read-only */
+ void *pixels; /**< Read-write */
+ int offset; /**< Private */
+
+ /** Hardware-specific surface info */
+ struct private_hwdata *hwdata;
+
+ /** clipping information */
+ SDL_Rect clip_rect; /**< Read-only */
+ Uint32 unused1; /**< for binary compatibility */
+
+ /** Allow recursive locks */
+ Uint32 locked; /**< Private */
+
+ /** info for fast blit mapping to other surfaces */
+ struct SDL_BlitMap *map; /**< Private */
+
+ /** format version, bumped at every change to invalidate blit maps */
+ unsigned int format_version; /**< Private */
+
+ /** Reference count -- used when freeing surface */
+ int refcount; /**< Read-mostly */
+} SDL_Surface;
+
+/** @name SDL_Surface Flags
+ * These are the currently supported flags for the SDL_surface
+ */
+/*@{*/
+
+/** Available for SDL_CreateRGBSurface() or SDL_SetVideoMode() */
+/*@{*/
+#define SDL_SWSURFACE 0x00000000 /**< Surface is in system memory */
+#define SDL_HWSURFACE 0x00000001 /**< Surface is in video memory */
+#define SDL_ASYNCBLIT 0x00000004 /**< Use asynchronous blits if possible */
+/*@}*/
+
+/** Available for SDL_SetVideoMode() */
+/*@{*/
+#define SDL_ANYFORMAT 0x10000000 /**< Allow any video depth/pixel-format */
+#define SDL_HWPALETTE 0x20000000 /**< Surface has exclusive palette */
+#define SDL_DOUBLEBUF 0x40000000 /**< Set up double-buffered video mode */
+#define SDL_FULLSCREEN 0x80000000 /**< Surface is a full screen display */
+#define SDL_OPENGL 0x00000002 /**< Create an OpenGL rendering context */
+#define SDL_OPENGLBLIT 0x0000000A /**< Create an OpenGL rendering context and use it for blitting */
+#define SDL_RESIZABLE 0x00000010 /**< This video mode may be resized */
+#define SDL_NOFRAME 0x00000020 /**< No window caption or edge frame */
+/*@}*/
+
+/** Used internally (read-only) */
+/*@{*/
+#define SDL_HWACCEL 0x00000100 /**< Blit uses hardware acceleration */
+#define SDL_SRCCOLORKEY 0x00001000 /**< Blit uses a source color key */
+#define SDL_RLEACCELOK 0x00002000 /**< Private flag */
+#define SDL_RLEACCEL 0x00004000 /**< Surface is RLE encoded */
+#define SDL_SRCALPHA 0x00010000 /**< Blit uses source alpha blending */
+#define SDL_PREALLOC 0x01000000 /**< Surface uses preallocated memory */
+/*@}*/
+
+/*@}*/
+
+/** Evaluates to true if the surface needs to be locked before access */
+#define SDL_MUSTLOCK(surface) \
+ (surface->offset || \
+ ((surface->flags & (SDL_HWSURFACE|SDL_ASYNCBLIT|SDL_RLEACCEL)) != 0))
+
+/** typedef for private surface blitting functions */
+typedef int (*SDL_blit)(struct SDL_Surface *src, SDL_Rect *srcrect,
+ struct SDL_Surface *dst, SDL_Rect *dstrect);
+
+
+/** Useful for determining the video hardware capabilities */
+typedef struct SDL_VideoInfo {
+ Uint32 hw_available :1; /**< Flag: Can you create hardware surfaces? */
+ Uint32 wm_available :1; /**< Flag: Can you talk to a window manager? */
+ Uint32 UnusedBits1 :6;
+ Uint32 UnusedBits2 :1;
+ Uint32 blit_hw :1; /**< Flag: Accelerated blits HW --> HW */
+ Uint32 blit_hw_CC :1; /**< Flag: Accelerated blits with Colorkey */
+ Uint32 blit_hw_A :1; /**< Flag: Accelerated blits with Alpha */
+ Uint32 blit_sw :1; /**< Flag: Accelerated blits SW --> HW */
+ Uint32 blit_sw_CC :1; /**< Flag: Accelerated blits with Colorkey */
+ Uint32 blit_sw_A :1; /**< Flag: Accelerated blits with Alpha */
+ Uint32 blit_fill :1; /**< Flag: Accelerated color fill */
+ Uint32 UnusedBits3 :16;
+ Uint32 video_mem; /**< The total amount of video memory (in K) */
+ SDL_PixelFormat *vfmt; /**< Value: The format of the video surface */
+ int current_w; /**< Value: The current video mode width */
+ int current_h; /**< Value: The current video mode height */
+} SDL_VideoInfo;
+
+
+/** @name Overlay Formats
+ * The most common video overlay formats.
+ * For an explanation of these pixel formats, see:
+ * http://www.webartz.com/fourcc/indexyuv.htm
+ *
+ * For information on the relationship between color spaces, see:
+ * http://www.neuro.sfc.keio.ac.jp/~aly/polygon/info/color-space-faq.html
+ */
+/*@{*/
+#define SDL_YV12_OVERLAY 0x32315659 /**< Planar mode: Y + V + U (3 planes) */
+#define SDL_IYUV_OVERLAY 0x56555949 /**< Planar mode: Y + U + V (3 planes) */
+#define SDL_YUY2_OVERLAY 0x32595559 /**< Packed mode: Y0+U0+Y1+V0 (1 plane) */
+#define SDL_UYVY_OVERLAY 0x59565955 /**< Packed mode: U0+Y0+V0+Y1 (1 plane) */
+#define SDL_YVYU_OVERLAY 0x55595659 /**< Packed mode: Y0+V0+Y1+U0 (1 plane) */
+/*@}*/
+
+/** The YUV hardware video overlay */
+typedef struct SDL_Overlay {
+ Uint32 format; /**< Read-only */
+ int w, h; /**< Read-only */
+ int planes; /**< Read-only */
+ Uint16 *pitches; /**< Read-only */
+ Uint8 **pixels; /**< Read-write */
+
+ /** @name Hardware-specific surface info */
+ /*@{*/
+ struct private_yuvhwfuncs *hwfuncs;
+ struct private_yuvhwdata *hwdata;
+ /*@{*/
+
+ /** @name Special flags */
+ /*@{*/
+ Uint32 hw_overlay :1; /**< Flag: This overlay hardware accelerated? */
+ Uint32 UnusedBits :31;
+ /*@}*/
+} SDL_Overlay;
+
+
+/** Public enumeration for setting the OpenGL window attributes. */
+typedef enum {
+ SDL_GL_RED_SIZE,
+ SDL_GL_GREEN_SIZE,
+ SDL_GL_BLUE_SIZE,
+ SDL_GL_ALPHA_SIZE,
+ SDL_GL_BUFFER_SIZE,
+ SDL_GL_DOUBLEBUFFER,
+ SDL_GL_DEPTH_SIZE,
+ SDL_GL_STENCIL_SIZE,
+ SDL_GL_ACCUM_RED_SIZE,
+ SDL_GL_ACCUM_GREEN_SIZE,
+ SDL_GL_ACCUM_BLUE_SIZE,
+ SDL_GL_ACCUM_ALPHA_SIZE,
+ SDL_GL_STEREO,
+ SDL_GL_MULTISAMPLEBUFFERS,
+ SDL_GL_MULTISAMPLESAMPLES,
+ SDL_GL_ACCELERATED_VISUAL,
+ SDL_GL_SWAP_CONTROL
+} SDL_GLattr;
+
+/** @name flags for SDL_SetPalette() */
+/*@{*/
+#define SDL_LOGPAL 0x01
+#define SDL_PHYSPAL 0x02
+/*@}*/
+
+/* Function prototypes */
+
+/**
+ * @name Video Init and Quit
+ * These functions are used internally, and should not be used unless you
+ * have a specific need to specify the video driver you want to use.
+ * You should normally use SDL_Init() or SDL_InitSubSystem().
+ */
+/*@{*/
+/**
+ * Initializes the video subsystem. Sets up a connection
+ * to the window manager, etc, and determines the current video mode and
+ * pixel format, but does not initialize a window or graphics mode.
+ * Note that event handling is activated by this routine.
+ *
+ * If you use both sound and video in your application, you need to call
+ * SDL_Init() before opening the sound device, otherwise under Win32 DirectX,
+ * you won't be able to set full-screen display modes.
+ */
+extern DECLSPEC int SDLCALL SDL_VideoInit(const char *driver_name, Uint32 flags);
+extern DECLSPEC void SDLCALL SDL_VideoQuit(void);
+/*@}*/
+
+/**
+ * This function fills the given character buffer with the name of the
+ * video driver, and returns a pointer to it if the video driver has
+ * been initialized. It returns NULL if no driver has been initialized.
+ */
+extern DECLSPEC char * SDLCALL SDL_VideoDriverName(char *namebuf, int maxlen);
+
+/**
+ * This function returns a pointer to the current display surface.
+ * If SDL is doing format conversion on the display surface, this
+ * function returns the publicly visible surface, not the real video
+ * surface.
+ */
+extern DECLSPEC SDL_Surface * SDLCALL SDL_GetVideoSurface(void);
+
+/**
+ * This function returns a read-only pointer to information about the
+ * video hardware. If this is called before SDL_SetVideoMode(), the 'vfmt'
+ * member of the returned structure will contain the pixel format of the
+ * "best" video mode.
+ */
+extern DECLSPEC const SDL_VideoInfo * SDLCALL SDL_GetVideoInfo(void);
+
+/**
+ * Check to see if a particular video mode is supported.
+ * It returns 0 if the requested mode is not supported under any bit depth,
+ * or returns the bits-per-pixel of the closest available mode with the
+ * given width and height. If this bits-per-pixel is different from the
+ * one used when setting the video mode, SDL_SetVideoMode() will succeed,
+ * but will emulate the requested bits-per-pixel with a shadow surface.
+ *
+ * The arguments to SDL_VideoModeOK() are the same ones you would pass to
+ * SDL_SetVideoMode()
+ */
+extern DECLSPEC int SDLCALL SDL_VideoModeOK(int width, int height, int bpp, Uint32 flags);
+
+/**
+ * Return a pointer to an array of available screen dimensions for the
+ * given format and video flags, sorted largest to smallest. Returns
+ * NULL if there are no dimensions available for a particular format,
+ * or (SDL_Rect **)-1 if any dimension is okay for the given format.
+ *
+ * If 'format' is NULL, the mode list will be for the format given
+ * by SDL_GetVideoInfo()->vfmt
+ */
+extern DECLSPEC SDL_Rect ** SDLCALL SDL_ListModes(SDL_PixelFormat *format, Uint32 flags);
+
+/**
+ * Set up a video mode with the specified width, height and bits-per-pixel.
+ *
+ * If 'bpp' is 0, it is treated as the current display bits per pixel.
+ *
+ * If SDL_ANYFORMAT is set in 'flags', the SDL library will try to set the
+ * requested bits-per-pixel, but will return whatever video pixel format is
+ * available. The default is to emulate the requested pixel format if it
+ * is not natively available.
+ *
+ * If SDL_HWSURFACE is set in 'flags', the video surface will be placed in
+ * video memory, if possible, and you may have to call SDL_LockSurface()
+ * in order to access the raw framebuffer. Otherwise, the video surface
+ * will be created in system memory.
+ *
+ * If SDL_ASYNCBLIT is set in 'flags', SDL will try to perform rectangle
+ * updates asynchronously, but you must always lock before accessing pixels.
+ * SDL will wait for updates to complete before returning from the lock.
+ *
+ * If SDL_HWPALETTE is set in 'flags', the SDL library will guarantee
+ * that the colors set by SDL_SetColors() will be the colors you get.
+ * Otherwise, in 8-bit mode, SDL_SetColors() may not be able to set all
+ * of the colors exactly the way they are requested, and you should look
+ * at the video surface structure to determine the actual palette.
+ * If SDL cannot guarantee that the colors you request can be set,
+ * i.e. if the colormap is shared, then the video surface may be created
+ * under emulation in system memory, overriding the SDL_HWSURFACE flag.
+ *
+ * If SDL_FULLSCREEN is set in 'flags', the SDL library will try to set
+ * a fullscreen video mode. The default is to create a windowed mode
+ * if the current graphics system has a window manager.
+ * If the SDL library is able to set a fullscreen video mode, this flag
+ * will be set in the surface that is returned.
+ *
+ * If SDL_DOUBLEBUF is set in 'flags', the SDL library will try to set up
+ * two surfaces in video memory and swap between them when you call
+ * SDL_Flip(). This is usually slower than the normal single-buffering
+ * scheme, but prevents "tearing" artifacts caused by modifying video
+ * memory while the monitor is refreshing. It should only be used by
+ * applications that redraw the entire screen on every update.
+ *
+ * If SDL_RESIZABLE is set in 'flags', the SDL library will allow the
+ * window manager, if any, to resize the window at runtime. When this
+ * occurs, SDL will send a SDL_VIDEORESIZE event to you application,
+ * and you must respond to the event by re-calling SDL_SetVideoMode()
+ * with the requested size (or another size that suits the application).
+ *
+ * If SDL_NOFRAME is set in 'flags', the SDL library will create a window
+ * without any title bar or frame decoration. Fullscreen video modes have
+ * this flag set automatically.
+ *
+ * This function returns the video framebuffer surface, or NULL if it fails.
+ *
+ * If you rely on functionality provided by certain video flags, check the
+ * flags of the returned surface to make sure that functionality is available.
+ * SDL will fall back to reduced functionality if the exact flags you wanted
+ * are not available.
+ */
+extern DECLSPEC SDL_Surface * SDLCALL SDL_SetVideoMode
+ (int width, int height, int bpp, Uint32 flags);
+
+/** @name SDL_Update Functions
+ * These functions should not be called while 'screen' is locked.
+ */
+/*@{*/
+/**
+ * Makes sure the given list of rectangles is updated on the given screen.
+ */
+extern DECLSPEC void SDLCALL SDL_UpdateRects
+ (SDL_Surface *screen, int numrects, SDL_Rect *rects);
+/**
+ * If 'x', 'y', 'w' and 'h' are all 0, SDL_UpdateRect will update the entire
+ * screen.
+ */
+extern DECLSPEC void SDLCALL SDL_UpdateRect
+ (SDL_Surface *screen, Sint32 x, Sint32 y, Uint32 w, Uint32 h);
+/*@}*/
+
+/**
+ * On hardware that supports double-buffering, this function sets up a flip
+ * and returns. The hardware will wait for vertical retrace, and then swap
+ * video buffers before the next video surface blit or lock will return.
+ * On hardware that doesn not support double-buffering, this is equivalent
+ * to calling SDL_UpdateRect(screen, 0, 0, 0, 0);
+ * The SDL_DOUBLEBUF flag must have been passed to SDL_SetVideoMode() when
+ * setting the video mode for this function to perform hardware flipping.
+ * This function returns 0 if successful, or -1 if there was an error.
+ */
+extern DECLSPEC int SDLCALL SDL_Flip(SDL_Surface *screen);
+
+/**
+ * Set the gamma correction for each of the color channels.
+ * The gamma values range (approximately) between 0.1 and 10.0
+ *
+ * If this function isn't supported directly by the hardware, it will
+ * be emulated using gamma ramps, if available. If successful, this
+ * function returns 0, otherwise it returns -1.
+ */
+extern DECLSPEC int SDLCALL SDL_SetGamma(float red, float green, float blue);
+
+/**
+ * Set the gamma translation table for the red, green, and blue channels
+ * of the video hardware. Each table is an array of 256 16-bit quantities,
+ * representing a mapping between the input and output for that channel.
+ * The input is the index into the array, and the output is the 16-bit
+ * gamma value at that index, scaled to the output color precision.
+ *
+ * You may pass NULL for any of the channels to leave it unchanged.
+ * If the call succeeds, it will return 0. If the display driver or
+ * hardware does not support gamma translation, or otherwise fails,
+ * this function will return -1.
+ */
+extern DECLSPEC int SDLCALL SDL_SetGammaRamp(const Uint16 *red, const Uint16 *green, const Uint16 *blue);
+
+/**
+ * Retrieve the current values of the gamma translation tables.
+ *
+ * You must pass in valid pointers to arrays of 256 16-bit quantities.
+ * Any of the pointers may be NULL to ignore that channel.
+ * If the call succeeds, it will return 0. If the display driver or
+ * hardware does not support gamma translation, or otherwise fails,
+ * this function will return -1.
+ */
+extern DECLSPEC int SDLCALL SDL_GetGammaRamp(Uint16 *red, Uint16 *green, Uint16 *blue);
+
+/**
+ * Sets a portion of the colormap for the given 8-bit surface. If 'surface'
+ * is not a palettized surface, this function does nothing, returning 0.
+ * If all of the colors were set as passed to SDL_SetColors(), it will
+ * return 1. If not all the color entries were set exactly as given,
+ * it will return 0, and you should look at the surface palette to
+ * determine the actual color palette.
+ *
+ * When 'surface' is the surface associated with the current display, the
+ * display colormap will be updated with the requested colors. If
+ * SDL_HWPALETTE was set in SDL_SetVideoMode() flags, SDL_SetColors()
+ * will always return 1, and the palette is guaranteed to be set the way
+ * you desire, even if the window colormap has to be warped or run under
+ * emulation.
+ */
+extern DECLSPEC int SDLCALL SDL_SetColors(SDL_Surface *surface,
+ SDL_Color *colors, int firstcolor, int ncolors);
+
+/**
+ * Sets a portion of the colormap for a given 8-bit surface.
+ * 'flags' is one or both of:
+ * SDL_LOGPAL -- set logical palette, which controls how blits are mapped
+ * to/from the surface,
+ * SDL_PHYSPAL -- set physical palette, which controls how pixels look on
+ * the screen
+ * Only screens have physical palettes. Separate change of physical/logical
+ * palettes is only possible if the screen has SDL_HWPALETTE set.
+ *
+ * The return value is 1 if all colours could be set as requested, and 0
+ * otherwise.
+ *
+ * SDL_SetColors() is equivalent to calling this function with
+ * flags = (SDL_LOGPAL|SDL_PHYSPAL).
+ */
+extern DECLSPEC int SDLCALL SDL_SetPalette(SDL_Surface *surface, int flags,
+ SDL_Color *colors, int firstcolor,
+ int ncolors);
+
+/**
+ * Maps an RGB triple to an opaque pixel value for a given pixel format
+ */
+extern DECLSPEC Uint32 SDLCALL SDL_MapRGB
+(const SDL_PixelFormat * const format,
+ const Uint8 r, const Uint8 g, const Uint8 b);
+
+/**
+ * Maps an RGBA quadruple to a pixel value for a given pixel format
+ */
+extern DECLSPEC Uint32 SDLCALL SDL_MapRGBA
+(const SDL_PixelFormat * const format,
+ const Uint8 r, const Uint8 g, const Uint8 b, const Uint8 a);
+
+/**
+ * Maps a pixel value into the RGB components for a given pixel format
+ */
+extern DECLSPEC void SDLCALL SDL_GetRGB(Uint32 pixel,
+ const SDL_PixelFormat * const fmt,
+ Uint8 *r, Uint8 *g, Uint8 *b);
+
+/**
+ * Maps a pixel value into the RGBA components for a given pixel format
+ */
+extern DECLSPEC void SDLCALL SDL_GetRGBA(Uint32 pixel,
+ const SDL_PixelFormat * const fmt,
+ Uint8 *r, Uint8 *g, Uint8 *b, Uint8 *a);
+
+/** @sa SDL_CreateRGBSurface */
+#define SDL_AllocSurface SDL_CreateRGBSurface
+/**
+ * Allocate and free an RGB surface (must be called after SDL_SetVideoMode)
+ * If the depth is 4 or 8 bits, an empty palette is allocated for the surface.
+ * If the depth is greater than 8 bits, the pixel format is set using the
+ * flags '[RGB]mask'.
+ * If the function runs out of memory, it will return NULL.
+ *
+ * The 'flags' tell what kind of surface to create.
+ * SDL_SWSURFACE means that the surface should be created in system memory.
+ * SDL_HWSURFACE means that the surface should be created in video memory,
+ * with the same format as the display surface. This is useful for surfaces
+ * that will not change much, to take advantage of hardware acceleration
+ * when being blitted to the display surface.
+ * SDL_ASYNCBLIT means that SDL will try to perform asynchronous blits with
+ * this surface, but you must always lock it before accessing the pixels.
+ * SDL will wait for current blits to finish before returning from the lock.
+ * SDL_SRCCOLORKEY indicates that the surface will be used for colorkey blits.
+ * If the hardware supports acceleration of colorkey blits between
+ * two surfaces in video memory, SDL will try to place the surface in
+ * video memory. If this isn't possible or if there is no hardware
+ * acceleration available, the surface will be placed in system memory.
+ * SDL_SRCALPHA means that the surface will be used for alpha blits and
+ * if the hardware supports hardware acceleration of alpha blits between
+ * two surfaces in video memory, to place the surface in video memory
+ * if possible, otherwise it will be placed in system memory.
+ * If the surface is created in video memory, blits will be _much_ faster,
+ * but the surface format must be identical to the video surface format,
+ * and the only way to access the pixels member of the surface is to use
+ * the SDL_LockSurface() and SDL_UnlockSurface() calls.
+ * If the requested surface actually resides in video memory, SDL_HWSURFACE
+ * will be set in the flags member of the returned surface. If for some
+ * reason the surface could not be placed in video memory, it will not have
+ * the SDL_HWSURFACE flag set, and will be created in system memory instead.
+ */
+extern DECLSPEC SDL_Surface * SDLCALL SDL_CreateRGBSurface
+ (Uint32 flags, int width, int height, int depth,
+ Uint32 Rmask, Uint32 Gmask, Uint32 Bmask, Uint32 Amask);
+/** @sa SDL_CreateRGBSurface */
+extern DECLSPEC SDL_Surface * SDLCALL SDL_CreateRGBSurfaceFrom(void *pixels,
+ int width, int height, int depth, int pitch,
+ Uint32 Rmask, Uint32 Gmask, Uint32 Bmask, Uint32 Amask);
+extern DECLSPEC void SDLCALL SDL_FreeSurface(SDL_Surface *surface);
+
+/**
+ * SDL_LockSurface() sets up a surface for directly accessing the pixels.
+ * Between calls to SDL_LockSurface()/SDL_UnlockSurface(), you can write
+ * to and read from 'surface->pixels', using the pixel format stored in
+ * 'surface->format'. Once you are done accessing the surface, you should
+ * use SDL_UnlockSurface() to release it.
+ *
+ * Not all surfaces require locking. If SDL_MUSTLOCK(surface) evaluates
+ * to 0, then you can read and write to the surface at any time, and the
+ * pixel format of the surface will not change. In particular, if the
+ * SDL_HWSURFACE flag is not given when calling SDL_SetVideoMode(), you
+ * will not need to lock the display surface before accessing it.
+ *
+ * No operating system or library calls should be made between lock/unlock
+ * pairs, as critical system locks may be held during this time.
+ *
+ * SDL_LockSurface() returns 0, or -1 if the surface couldn't be locked.
+ */
+extern DECLSPEC int SDLCALL SDL_LockSurface(SDL_Surface *surface);
+extern DECLSPEC void SDLCALL SDL_UnlockSurface(SDL_Surface *surface);
+
+/**
+ * Load a surface from a seekable SDL data source (memory or file.)
+ * If 'freesrc' is non-zero, the source will be closed after being read.
+ * Returns the new surface, or NULL if there was an error.
+ * The new surface should be freed with SDL_FreeSurface().
+ */
+extern DECLSPEC SDL_Surface * SDLCALL SDL_LoadBMP_RW(SDL_RWops *src, int freesrc);
+
+/** Convenience macro -- load a surface from a file */
+#define SDL_LoadBMP(file) SDL_LoadBMP_RW(SDL_RWFromFile(file, "rb"), 1)
+
+/**
+ * Save a surface to a seekable SDL data source (memory or file.)
+ * If 'freedst' is non-zero, the source will be closed after being written.
+ * Returns 0 if successful or -1 if there was an error.
+ */
+extern DECLSPEC int SDLCALL SDL_SaveBMP_RW
+ (SDL_Surface *surface, SDL_RWops *dst, int freedst);
+
+/** Convenience macro -- save a surface to a file */
+#define SDL_SaveBMP(surface, file) \
+ SDL_SaveBMP_RW(surface, SDL_RWFromFile(file, "wb"), 1)
+
+/**
+ * Sets the color key (transparent pixel) in a blittable surface.
+ * If 'flag' is SDL_SRCCOLORKEY (optionally OR'd with SDL_RLEACCEL),
+ * 'key' will be the transparent pixel in the source image of a blit.
+ * SDL_RLEACCEL requests RLE acceleration for the surface if present,
+ * and removes RLE acceleration if absent.
+ * If 'flag' is 0, this function clears any current color key.
+ * This function returns 0, or -1 if there was an error.
+ */
+extern DECLSPEC int SDLCALL SDL_SetColorKey
+ (SDL_Surface *surface, Uint32 flag, Uint32 key);
+
+/**
+ * This function sets the alpha value for the entire surface, as opposed to
+ * using the alpha component of each pixel. This value measures the range
+ * of transparency of the surface, 0 being completely transparent to 255
+ * being completely opaque. An 'alpha' value of 255 causes blits to be
+ * opaque, the source pixels copied to the destination (the default). Note
+ * that per-surface alpha can be combined with colorkey transparency.
+ *
+ * If 'flag' is 0, alpha blending is disabled for the surface.
+ * If 'flag' is SDL_SRCALPHA, alpha blending is enabled for the surface.
+ * OR:ing the flag with SDL_RLEACCEL requests RLE acceleration for the
+ * surface; if SDL_RLEACCEL is not specified, the RLE accel will be removed.
+ *
+ * The 'alpha' parameter is ignored for surfaces that have an alpha channel.
+ */
+extern DECLSPEC int SDLCALL SDL_SetAlpha(SDL_Surface *surface, Uint32 flag, Uint8 alpha);
+
+/**
+ * Sets the clipping rectangle for the destination surface in a blit.
+ *
+ * If the clip rectangle is NULL, clipping will be disabled.
+ * If the clip rectangle doesn't intersect the surface, the function will
+ * return SDL_FALSE and blits will be completely clipped. Otherwise the
+ * function returns SDL_TRUE and blits to the surface will be clipped to
+ * the intersection of the surface area and the clipping rectangle.
+ *
+ * Note that blits are automatically clipped to the edges of the source
+ * and destination surfaces.
+ */
+extern DECLSPEC SDL_bool SDLCALL SDL_SetClipRect(SDL_Surface *surface, const SDL_Rect *rect);
+
+/**
+ * Gets the clipping rectangle for the destination surface in a blit.
+ * 'rect' must be a pointer to a valid rectangle which will be filled
+ * with the correct values.
+ */
+extern DECLSPEC void SDLCALL SDL_GetClipRect(SDL_Surface *surface, SDL_Rect *rect);
+
+/**
+ * Creates a new surface of the specified format, and then copies and maps
+ * the given surface to it so the blit of the converted surface will be as
+ * fast as possible. If this function fails, it returns NULL.
+ *
+ * The 'flags' parameter is passed to SDL_CreateRGBSurface() and has those
+ * semantics. You can also pass SDL_RLEACCEL in the flags parameter and
+ * SDL will try to RLE accelerate colorkey and alpha blits in the resulting
+ * surface.
+ *
+ * This function is used internally by SDL_DisplayFormat().
+ */
+extern DECLSPEC SDL_Surface * SDLCALL SDL_ConvertSurface
+ (SDL_Surface *src, SDL_PixelFormat *fmt, Uint32 flags);
+
+/**
+ * This performs a fast blit from the source surface to the destination
+ * surface. It assumes that the source and destination rectangles are
+ * the same size. If either 'srcrect' or 'dstrect' are NULL, the entire
+ * surface (src or dst) is copied. The final blit rectangles are saved
+ * in 'srcrect' and 'dstrect' after all clipping is performed.
+ * If the blit is successful, it returns 0, otherwise it returns -1.
+ *
+ * The blit function should not be called on a locked surface.
+ *
+ * The blit semantics for surfaces with and without alpha and colorkey
+ * are defined as follows:
+ *
+ * RGBA->RGB:
+ * SDL_SRCALPHA set:
+ * alpha-blend (using alpha-channel).
+ * SDL_SRCCOLORKEY ignored.
+ * SDL_SRCALPHA not set:
+ * copy RGB.
+ * if SDL_SRCCOLORKEY set, only copy the pixels matching the
+ * RGB values of the source colour key, ignoring alpha in the
+ * comparison.
+ *
+ * RGB->RGBA:
+ * SDL_SRCALPHA set:
+ * alpha-blend (using the source per-surface alpha value);
+ * set destination alpha to opaque.
+ * SDL_SRCALPHA not set:
+ * copy RGB, set destination alpha to source per-surface alpha value.
+ * both:
+ * if SDL_SRCCOLORKEY set, only copy the pixels matching the
+ * source colour key.
+ *
+ * RGBA->RGBA:
+ * SDL_SRCALPHA set:
+ * alpha-blend (using the source alpha channel) the RGB values;
+ * leave destination alpha untouched. [Note: is this correct?]
+ * SDL_SRCCOLORKEY ignored.
+ * SDL_SRCALPHA not set:
+ * copy all of RGBA to the destination.
+ * if SDL_SRCCOLORKEY set, only copy the pixels matching the
+ * RGB values of the source colour key, ignoring alpha in the
+ * comparison.
+ *
+ * RGB->RGB:
+ * SDL_SRCALPHA set:
+ * alpha-blend (using the source per-surface alpha value).
+ * SDL_SRCALPHA not set:
+ * copy RGB.
+ * both:
+ * if SDL_SRCCOLORKEY set, only copy the pixels matching the
+ * source colour key.
+ *
+ * If either of the surfaces were in video memory, and the blit returns -2,
+ * the video memory was lost, so it should be reloaded with artwork and
+ * re-blitted:
+ * @code
+ * while ( SDL_BlitSurface(image, imgrect, screen, dstrect) == -2 ) {
+ * while ( SDL_LockSurface(image) < 0 )
+ * Sleep(10);
+ * -- Write image pixels to image->pixels --
+ * SDL_UnlockSurface(image);
+ * }
+ * @endcode
+ *
+ * This happens under DirectX 5.0 when the system switches away from your
+ * fullscreen application. The lock will also fail until you have access
+ * to the video memory again.
+ *
+ * You should call SDL_BlitSurface() unless you know exactly how SDL
+ * blitting works internally and how to use the other blit functions.
+ */
+#define SDL_BlitSurface SDL_UpperBlit
+
+/** This is the public blit function, SDL_BlitSurface(), and it performs
+ * rectangle validation and clipping before passing it to SDL_LowerBlit()
+ */
+extern DECLSPEC int SDLCALL SDL_UpperBlit
+ (SDL_Surface *src, SDL_Rect *srcrect,
+ SDL_Surface *dst, SDL_Rect *dstrect);
+/** This is a semi-private blit function and it performs low-level surface
+ * blitting only.
+ */
+extern DECLSPEC int SDLCALL SDL_LowerBlit
+ (SDL_Surface *src, SDL_Rect *srcrect,
+ SDL_Surface *dst, SDL_Rect *dstrect);
+
+/**
+ * This function performs a fast fill of the given rectangle with 'color'
+ * The given rectangle is clipped to the destination surface clip area
+ * and the final fill rectangle is saved in the passed in pointer.
+ * If 'dstrect' is NULL, the whole surface will be filled with 'color'
+ * The color should be a pixel of the format used by the surface, and
+ * can be generated by the SDL_MapRGB() function.
+ * This function returns 0 on success, or -1 on error.
+ */
+extern DECLSPEC int SDLCALL SDL_FillRect
+ (SDL_Surface *dst, SDL_Rect *dstrect, Uint32 color);
+
+/**
+ * This function takes a surface and copies it to a new surface of the
+ * pixel format and colors of the video framebuffer, suitable for fast
+ * blitting onto the display surface. It calls SDL_ConvertSurface()
+ *
+ * If you want to take advantage of hardware colorkey or alpha blit
+ * acceleration, you should set the colorkey and alpha value before
+ * calling this function.
+ *
+ * If the conversion fails or runs out of memory, it returns NULL
+ */
+extern DECLSPEC SDL_Surface * SDLCALL SDL_DisplayFormat(SDL_Surface *surface);
+
+/**
+ * This function takes a surface and copies it to a new surface of the
+ * pixel format and colors of the video framebuffer (if possible),
+ * suitable for fast alpha blitting onto the display surface.
+ * The new surface will always have an alpha channel.
+ *
+ * If you want to take advantage of hardware colorkey or alpha blit
+ * acceleration, you should set the colorkey and alpha value before
+ * calling this function.
+ *
+ * If the conversion fails or runs out of memory, it returns NULL
+ */
+extern DECLSPEC SDL_Surface * SDLCALL SDL_DisplayFormatAlpha(SDL_Surface *surface);
+
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+/** @name YUV video surface overlay functions */ /*@{*/
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/** This function creates a video output overlay
+ * Calling the returned surface an overlay is something of a misnomer because
+ * the contents of the display surface underneath the area where the overlay
+ * is shown is undefined - it may be overwritten with the converted YUV data.
+ */
+extern DECLSPEC SDL_Overlay * SDLCALL SDL_CreateYUVOverlay(int width, int height,
+ Uint32 format, SDL_Surface *display);
+
+/** Lock an overlay for direct access, and unlock it when you are done */
+extern DECLSPEC int SDLCALL SDL_LockYUVOverlay(SDL_Overlay *overlay);
+extern DECLSPEC void SDLCALL SDL_UnlockYUVOverlay(SDL_Overlay *overlay);
+
+/** Blit a video overlay to the display surface.
+ * The contents of the video surface underneath the blit destination are
+ * not defined.
+ * The width and height of the destination rectangle may be different from
+ * that of the overlay, but currently only 2x scaling is supported.
+ */
+extern DECLSPEC int SDLCALL SDL_DisplayYUVOverlay(SDL_Overlay *overlay, SDL_Rect *dstrect);
+
+/** Free a video overlay */
+extern DECLSPEC void SDLCALL SDL_FreeYUVOverlay(SDL_Overlay *overlay);
+
+/*@}*/
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+/** @name OpenGL support functions. */ /*@{*/
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/**
+ * Dynamically load an OpenGL library, or the default one if path is NULL
+ *
+ * If you do this, you need to retrieve all of the GL functions used in
+ * your program from the dynamic library using SDL_GL_GetProcAddress().
+ */
+extern DECLSPEC int SDLCALL SDL_GL_LoadLibrary(const char *path);
+
+/**
+ * Get the address of a GL function
+ */
+extern DECLSPEC void * SDLCALL SDL_GL_GetProcAddress(const char* proc);
+
+/**
+ * Set an attribute of the OpenGL subsystem before intialization.
+ */
+extern DECLSPEC int SDLCALL SDL_GL_SetAttribute(SDL_GLattr attr, int value);
+
+/**
+ * Get an attribute of the OpenGL subsystem from the windowing
+ * interface, such as glX. This is of course different from getting
+ * the values from SDL's internal OpenGL subsystem, which only
+ * stores the values you request before initialization.
+ *
+ * Developers should track the values they pass into SDL_GL_SetAttribute
+ * themselves if they want to retrieve these values.
+ */
+extern DECLSPEC int SDLCALL SDL_GL_GetAttribute(SDL_GLattr attr, int* value);
+
+/**
+ * Swap the OpenGL buffers, if double-buffering is supported.
+ */
+extern DECLSPEC void SDLCALL SDL_GL_SwapBuffers(void);
+
+/** @name OpenGL Internal Functions
+ * Internal functions that should not be called unless you have read
+ * and understood the source code for these functions.
+ */
+/*@{*/
+extern DECLSPEC void SDLCALL SDL_GL_UpdateRects(int numrects, SDL_Rect* rects);
+extern DECLSPEC void SDLCALL SDL_GL_Lock(void);
+extern DECLSPEC void SDLCALL SDL_GL_Unlock(void);
+/*@}*/
+
+/*@}*/
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+/** @name Window Manager Functions */
+/** These functions allow interaction with the window manager, if any. */ /*@{*/
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/**
+ * Sets the title and icon text of the display window (UTF-8 encoded)
+ */
+extern DECLSPEC void SDLCALL SDL_WM_SetCaption(const char *title, const char *icon);
+/**
+ * Gets the title and icon text of the display window (UTF-8 encoded)
+ */
+extern DECLSPEC void SDLCALL SDL_WM_GetCaption(char **title, char **icon);
+
+/**
+ * Sets the icon for the display window.
+ * This function must be called before the first call to SDL_SetVideoMode().
+ * It takes an icon surface, and a mask in MSB format.
+ * If 'mask' is NULL, the entire icon surface will be used as the icon.
+ */
+extern DECLSPEC void SDLCALL SDL_WM_SetIcon(SDL_Surface *icon, Uint8 *mask);
+
+/**
+ * This function iconifies the window, and returns 1 if it succeeded.
+ * If the function succeeds, it generates an SDL_APPACTIVE loss event.
+ * This function is a noop and returns 0 in non-windowed environments.
+ */
+extern DECLSPEC int SDLCALL SDL_WM_IconifyWindow(void);
+
+/**
+ * Toggle fullscreen mode without changing the contents of the screen.
+ * If the display surface does not require locking before accessing
+ * the pixel information, then the memory pointers will not change.
+ *
+ * If this function was able to toggle fullscreen mode (change from
+ * running in a window to fullscreen, or vice-versa), it will return 1.
+ * If it is not implemented, or fails, it returns 0.
+ *
+ * The next call to SDL_SetVideoMode() will set the mode fullscreen
+ * attribute based on the flags parameter - if SDL_FULLSCREEN is not
+ * set, then the display will be windowed by default where supported.
+ *
+ * This is currently only implemented in the X11 video driver.
+ */
+extern DECLSPEC int SDLCALL SDL_WM_ToggleFullScreen(SDL_Surface *surface);
+
+typedef enum {
+ SDL_GRAB_QUERY = -1,
+ SDL_GRAB_OFF = 0,
+ SDL_GRAB_ON = 1,
+ SDL_GRAB_FULLSCREEN /**< Used internally */
+} SDL_GrabMode;
+/**
+ * This function allows you to set and query the input grab state of
+ * the application. It returns the new input grab state.
+ *
+ * Grabbing means that the mouse is confined to the application window,
+ * and nearly all keyboard input is passed directly to the application,
+ * and not interpreted by a window manager, if any.
+ */
+extern DECLSPEC SDL_GrabMode SDLCALL SDL_WM_GrabInput(SDL_GrabMode mode);
+
+/*@}*/
+
+/** @internal Not in public API at the moment - do not use! */
+extern DECLSPEC int SDLCALL SDL_SoftStretch(SDL_Surface *src, SDL_Rect *srcrect,
+ SDL_Surface *dst, SDL_Rect *dstrect);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* _SDL_video_h */