(*

 * Hedgewars, a free turn based strategy game

 * Copyright (c) 2004-2015 Andrey Korotaev <unC0Rr@gmail.com>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; version 2 of the License

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

 *)

{$INCLUDE "options.inc"}

unit uLand;

interface

uses SDLh, uLandTemplates, uConsts, uTypes, uAILandMarks;

procedure initModule;

procedure freeModule;

procedure DrawBottomBorder;

procedure GenMap;

procedure GenPreview(out Preview: TPreview);

procedure GenPreviewAlpha(out Preview: TPreviewAlpha);

implementation

uses uConsole, uStore, uRandom, uLandObjects, uIO, uLandTexture,

     uVariables, uUtils, uCommands, adler32, uDebug, uLandPainted, uTextures,

     uLandGenMaze, uPhysFSLayer, uScript, uLandGenPerlin,

     uLandGenTemplateBased, uLandUtils, uRenderUtils;

var digest: shortstring;

    maskOnly: boolean;

procedure PrettifyLandAlpha();

begin

    if (cReducedQuality and rqBlurryLand) <> 0 then

        PrettifyAlpha2D(LandPixels, LAND_HEIGHT div 2, LAND_WIDTH div 2)

    else

        PrettifyAlpha2D(LandPixels, LAND_HEIGHT, LAND_WIDTH);

end;

procedure DrawBorderFromImage(Surface: PSDL_Surface);

var tmpsurf: PSDL_Surface;

    //r, rr: TSDL_Rect;

    x, yd, yu: LongInt;

    targetMask: Word;

begin

    tmpsurf:= LoadDataImage(ptCurrTheme, 'Border', ifCritical or ifIgnoreCaps or ifColorKey);

    // if mask only, all land gets filled with landtex and therefore needs borders

    if maskOnly then

        targetMask:= lfLandMask

    else

        targetMask:= lfBasic;

    for x:= 0 to LAND_WIDTH - 1 do

    begin

        yd:= LAND_HEIGHT - 1;

        repeat

            while (yd > 0) and ((Land[yd, x] and targetMask) = 0) do dec(yd);

            if (yd < 0) then

                yd:= 0;

            while (yd < LAND_HEIGHT) and ((Land[yd, x] and targetMask) <> 0) do

                inc(yd);

            dec(yd);

            yu:= yd;

            while (yu > 0  ) and ((Land[yu, x] and targetMask) <> 0) do dec(yu);

            while (yu < yd ) and ((Land[yu, x] and targetMask) =  0) do inc(yu);

            if (yd < LAND_HEIGHT - 1) and ((yd - yu) >= 16) then

                copyToXYFromRect(tmpsurf, Surface, x mod tmpsurf^.w, 16, 1, 16, x, yd - 15);

            if (yu > 0) then

                copyToXYFromRect(tmpsurf, Surface, x mod tmpsurf^.w, 0, 1, Min(16, yd - yu + 1), x, yu);

            yd:= yu - 1;

        until yd < 0;

    end;

    SDL_FreeSurface(tmpsurf);

end;

procedure DrawShoppaBorder;

var x, y, s, i: Longword;

    c1, c2, c: Longword;

begin

    c1:= AMask;

    c2:= AMask or RMask or GMask;

    // vertical

    s:= LAND_HEIGHT;

    for x:= 0 to LAND_WIDTH - 1 do

        for y:= 0 to LAND_HEIGHT - 1 do

            if Land[y, x] = 0 then

                if s < y then

                    begin

                    for i:= max(s, y - 8) to y - 1 do

                        begin

                        if ((x + i) and 16) = 0 then c:= c1 else c:= c2;

                        if (cReducedQuality and rqBlurryLand) = 0 then

                            LandPixels[i, x]:= c

                        else

                            LandPixels[i div 2, x div 2]:= c

                        end;

                    s:= LAND_HEIGHT

                    end

                else

            else

                begin

                if s > y then s:= y;

                if s + 8 > y then

                    begin

                    if ((x + y) and 16) = 0 then c:= c1 else c:= c2;

                    if (cReducedQuality and rqBlurryLand) = 0 then

                        LandPixels[y, x]:= c

                    else

                        LandPixels[y div 2, x div 2]:= c

                    end;

                end;

    // horizontal

    s:= LAND_WIDTH;

    for y:= 0 to LAND_HEIGHT - 1 do

        for x:= 0 to LAND_WIDTH - 1 do

            if Land[y, x] = 0 then

                if s < x then

                    begin

                    for i:= max(s, x - 8) to x - 1 do

                        begin

                        if ((y + i) and 16) = 0 then c:= c1 else c:= c2;

                        if (cReducedQuality and rqBlurryLand) = 0 then

                            LandPixels[y, i]:= c

                        else

                            LandPixels[y div 2, i div 2]:= c

                        end;

                    s:= LAND_WIDTH

                    end

                else

            else

                begin

                if s > x then s:= x;

                if s + 8 > x then

                    begin

                    if ((x + y) and 16) = 0 then c:= c1 else c:= c2;

                    if (cReducedQuality and rqBlurryLand) = 0 then

                        LandPixels[y, x]:= c

                    else

                        LandPixels[y div 2, x div 2]:= c

                    end;

                end

end;

procedure ColorizeLandFast(mapsurf: PSDL_Surface);

var ltexsurf: PSDL_Surface;

    i: LongInt;

    ltlnp, srcp, dstp, stopp: Pointer;

    c: SizeInt;

begin

    ltexsurf:= LoadDataImage(ptCurrTheme, 'LandTex', ifCritical or ifIgnoreCaps);

    // pointer to current line of ltexsurf pixels. will be moved from line to line

    ltlnp:= ltexsurf^.pixels;

    // pointer to mapsurf pixels. will jump forward after every move()

    dstp:= mapsurf^.pixels;

    // time to get serious

    SDL_LockSurface(mapsurf);

    SDL_LockSurface(ltexsurf);

    // for now only fill a row with the height of landtex. do vertical copies within mapsurf after

    // do this loop for each line of ltexsurf (unless we run out of map height first)

    for i:= 1 to min(ltexsurf^.h, mapsurf^.h) do

        begin

        // amount of pixels to write in first move()

        c:= ltexsurf^.pitch;

        // protect from odd cases where landtex wider than map

        if c > mapsurf^.pitch then

            c:= mapsurf^.pitch;

        // write line of landtex to mapsurf

        move(ltlnp^, dstp^, c);

        // fill the rest of the line by copying left-to-right until full

        // new src is start of line that we've just written to

        srcp:= dstp;

        // set stop pointer to start of next pixel line of mapsurf

        stopp:= dstp + mapsurf^.pitch;

        // move dst pointer to after what we've just written

        inc(dstp, c);

        // loop until dstp went past end of line

        while dstp < stopp do

            begin

            // copy all from left of dstp to right of it (or just fill the gap if smaller)

            c:= min(dstp-srcp, stopp-dstp);

            move(srcp^, dstp^, c);

            inc(dstp, c);

            end;

        // move to next line in ltexsurf

        inc(ltlnp, ltexsurf^.pitch);

        end;

    // we don't need ltexsurf itself anymore -> cleanup

    ltlnp:= nil;

    SDL_UnlockSurface(ltexsurf);

    SDL_FreeSurface(ltexsurf);

    ltexsurf:= nil;

    // from now on only copy pixels within mapsurf

    // copy all the already written lines at once for that get number of written bytes so far

    // already written pixels are between start and current dstp

    srcp:= mapsurf^.pixels;

    // first byte after end of pixels

    stopp:= srcp + (mapsurf^.pitch * mapsurf^.h);

    while dstp < stopp do

        begin

        // copy all from before dstp to after (or just fill the gap if smaller)

        c:= min(dstp-srcp, stopp-dstp);

        // worried about size of c with humongous maps? don't be:

        //  the OS wouldn't have allowed allocation of object with size > max of SizeInt anyway

        move(srcp^, dstp^, c);

        inc(dstp, c);

        end;

    // cleanup

    srcp:= nil;

    dstp:= nil;

    stopp:= nil;

    SDL_UnlockSurface(mapsurf);

    // freed in freeModule() below

    LandBackSurface:= LoadDataImage(ptCurrTheme, 'LandBackTex', ifIgnoreCaps or ifColorKey);

    if (LandBackSurface <> nil) and GrayScale then Surface2GrayScale(LandBackSurface);

end;

procedure ColorizeLand(Surface: PSDL_Surface);

var tmpsurf: PSDL_Surface;

    r: TSDL_Rect;

    y: LongInt; // stupid SDL 1.2 uses stupid SmallInt for y which limits us to 32767.  But is even worse if LandTex is large, can overflow on 32767 map.

begin

    tmpsurf:= LoadDataImage(ptCurrTheme, 'LandTex', ifCritical or ifIgnoreCaps);

    r.y:= 0;

    y:= 0;

    while y < LAND_HEIGHT do

        begin

        r.x:= 0;

        while r.x < LAND_WIDTH do

            begin

            copyToXY(tmpsurf, Surface, r.x, r.y);

            //SDL_UpperBlit(tmpsurf, nil, Surface, @r);

            inc(r.x, tmpsurf^.w)

            end;

        inc(y, tmpsurf^.h);

        r.y:= y

        end;

    SDL_FreeSurface(tmpsurf);

    // freed in freeModule() below

    LandBackSurface:= LoadDataImage(ptCurrTheme, 'LandBackTex', ifIgnoreCaps or ifColorKey);

    if (LandBackSurface <> nil) and GrayScale then Surface2GrayScale(LandBackSurface);

end;

procedure GenDrawnMap;

begin

    ResizeLand(4096, 2048);

    uLandPainted.Draw;

    MaxHedgehogs:= 48;

    hasGirders:= true;

    playHeight:= 2048;

    playWidth:= 4096;

    leftX:= ((LAND_WIDTH - playWidth) div 2);

    rightX:= (playWidth + ((LAND_WIDTH - playWidth) div 2)) - 1;

    topY:= LAND_HEIGHT - playHeight;

end;

function SelectTemplate: LongInt;

var l: LongInt;

begin

    if (cReducedQuality and rqLowRes) <> 0 then

        SelectTemplate:= SmallTemplates[getrandom(Succ(High(SmallTemplates)))]

    else

    begin

        if cTemplateFilter = 0 then

            begin

            l:= getRandom(GroupedTemplatesCount);

            repeat

                inc(cTemplateFilter);

                dec(l, TemplateCounts[cTemplateFilter]);

            until l < 0;

            end else getRandom(1);

        case cTemplateFilter of

        0: OutError('Ask unC0Rr about what you did wrong', true);

        1: SelectTemplate:= SmallTemplates[getrandom(TemplateCounts[cTemplateFilter])];

        2: SelectTemplate:= MediumTemplates[getrandom(TemplateCounts[cTemplateFilter])];

        3: SelectTemplate:= LargeTemplates[getrandom(TemplateCounts[cTemplateFilter])];

        4: SelectTemplate:= CavernTemplates[getrandom(TemplateCounts[cTemplateFilter])];

        5: SelectTemplate:= WackyTemplates[getrandom(TemplateCounts[cTemplateFilter])];

// For lua only!

        6: begin

           SelectTemplate:= min(LuaTemplateNumber,High(EdgeTemplates));

           GetRandom(2) // burn 1

           end

        end

    end;

    WriteLnToConsole('Selected template #'+inttostr(SelectTemplate)+' using filter #'+inttostr(cTemplateFilter));

end;

procedure LandSurface2LandPixels(Surface: PSDL_Surface);

var x, y: LongInt;

    p: PLongwordArray;

begin

if checkFails(Surface <> nil, 'Assert (LandSurface <> nil) failed', true) then exit;

if SDL_MustLock(Surface) then

    if SDLCheck(SDL_LockSurface(Surface) >= 0, 'SDL_LockSurface', true) then exit;

p:= Surface^.pixels;

for y:= 0 to LAND_HEIGHT - 1 do

    begin

    for x:= 0 to LAND_WIDTH - 1 do

    if Land[y, x] <> 0 then

        if (cReducedQuality and rqBlurryLand) = 0 then

            LandPixels[y, x]:= p^[x]// or AMask

        else

            LandPixels[y div 2, x div 2]:= p^[x];// or AMask;

    p:= PLongwordArray(@(p^[Surface^.pitch div 4]));

    end;

if SDL_MustLock(Surface) then

    SDL_UnlockSurface(Surface);

end;

procedure GenLandSurface;

var tmpsurf: PSDL_Surface;

    x,y: Longword;

begin

    AddProgress();

    tmpsurf:= SDL_CreateRGBSurface(SDL_SWSURFACE, LAND_WIDTH, LAND_HEIGHT, 32, RMask, GMask, BMask, AMask);

    if checkFails(tmpsurf <> nil, 'Error creating pre-land surface', true) then exit;

    ColorizeLandFast(tmpsurf);

    if gameFlags and gfShoppaBorder = 0 then DrawBorderFromImage(tmpsurf);

    AddOnLandObjects(tmpsurf);

    LandSurface2LandPixels(tmpsurf);

    SDL_FreeSurface(tmpsurf);

    if gameFlags and gfShoppaBorder <> 0 then DrawShoppaBorder;

    for x:= leftX+2 to rightX-2 do

        for y:= topY+2 to LAND_HEIGHT-3 do

            if (Land[y, x] = 0) and

               (((Land[y, x-1] = lfBasic) and ((Land[y+1,x] = lfBasic)) or (Land[y-1,x] = lfBasic)) or

               ((Land[y, x+1] = lfBasic) and ((Land[y-1,x] = lfBasic) or (Land[y+1,x] = lfBasic)))) then

            begin

                if (cReducedQuality and rqBlurryLand) = 0 then

                    begin

                    if (Land[y, x-1] = lfBasic) and (LandPixels[y, x-1] and AMask <> 0) then

                        LandPixels[y, x]:= LandPixels[y, x-1]

                    else if (Land[y, x+1] = lfBasic) and (LandPixels[y, x+1] and AMask <> 0) then

                        LandPixels[y, x]:= LandPixels[y, x+1]

                    else if (Land[y-1, x] = lfBasic) and (LandPixels[y-1, x] and AMask <> 0) then

                        LandPixels[y, x]:= LandPixels[y-1, x]

                    else if (Land[y+1, x] = lfBasic) and (LandPixels[y+1, x] and AMask <> 0) then

                        LandPixels[y, x]:= LandPixels[y+1, x];

                    if (((LandPixels[y,x] and AMask) shr AShift) > 10) then

                        LandPixels[y,x]:= (LandPixels[y,x] and (not AMask)) or (128 shl AShift)

                    end;

                Land[y,x]:= lfObject

            end

            else if (Land[y, x] = 0) and

                    (((Land[y, x-1] = lfBasic) and (Land[y+1,x-1] = lfBasic) and (Land[y+2,x] = lfBasic)) or

                    ((Land[y, x-1] = lfBasic) and (Land[y-1,x-1] = lfBasic) and (Land[y-2,x] = lfBasic)) or

                    ((Land[y, x+1] = lfBasic) and (Land[y+1,x+1] = lfBasic) and (Land[y+2,x] = lfBasic)) or

                    ((Land[y, x+1] = lfBasic) and (Land[y-1,x+1] = lfBasic) and (Land[y-2,x] = lfBasic)) or

                    ((Land[y+1, x] = lfBasic) and (Land[y+1,x+1] = lfBasic) and (Land[y,x+2] = lfBasic)) or

                    ((Land[y-1, x] = lfBasic) and (Land[y-1,x+1] = lfBasic) and (Land[y,x+2] = lfBasic)) or

                    ((Land[y+1, x] = lfBasic) and (Land[y+1,x-1] = lfBasic) and (Land[y,x-2] = lfBasic)) or

                    ((Land[y-1, x] = lfBasic) and (Land[y-1,x-1] = lfBasic) and (Land[y,x-2] = lfBasic))) then

                begin

                if (cReducedQuality and rqBlurryLand) = 0 then

                    begin

                    if (Land[y, x-1] = lfBasic) and (LandPixels[y,x-1] and AMask <> 0) then

                        LandPixels[y, x]:= LandPixels[y, x-1]

                    else if (Land[y, x+1] = lfBasic) and (LandPixels[y,x+1] and AMask <> 0) then

                        LandPixels[y, x]:= LandPixels[y, x+1]

                    else if (Land[y+1, x] = lfBasic) and (LandPixels[y+1,x] and AMask <> 0) then

                        LandPixels[y, x]:= LandPixels[y+1, x]

                    else if (Land[y-1, x] = lfBasic) and (LandPixels[y-1,x] and AMask <> 0) then

                        LandPixels[y, x]:= LandPixels[y-1, x];

                    if (((LandPixels[y,x] and AMask) shr AShift) > 10) then

                        LandPixels[y,x]:= (LandPixels[y,x] and (not AMask)) or (64 shl AShift)

                    end;

                Land[y,x]:= lfObject

            end;

    AddProgress();

end;

procedure MakeFortsPreview;

var gap: LongInt;

    h1, h2, w1, w2, x, y, lastX, wbm, bmref: LongWord;

const fortHeight = 960;

      fortWidth  = 704;

      bmHeight = 53;

      bmWidth = 64;

begin

ResizeLand(4096,2048);

lastX:= LAND_WIDTH-1;

gap:= (1024 - fortWidth) + 60 + 20 * cFeatureSize;

h2:= LAND_HEIGHT-1;

h1:= h2 - fortHeight;

w2:= (LAND_WIDTH - gap) div 2;

w1:= w2 - fortWidth;

wbm:= h1 + bmHeight;

// generate 2 forts in center

for y:= h1 to h2 do

    for x:= w1 to w2 do

        begin

        if x mod 4 <> 0 then

            begin

            if (y <= wbm) and ((x - w1) mod (bmWidth * 2) >= bmWidth) then

                continue;

            Land[y,x]:= lfBasic;

            Land[y,lastX-x]:= lfBasic;

            end;

        end;

w2:= w1 - gap;

w1:= max(0, w2 - fortWidth);

wbm:= h1 + bmHeight;

bmref:= w2 + bmWidth;

for y:= h1 to h2 do

    for x:= w1 to w2 do

        begin