/* zlib.h -- interface of the 'zlib' general purpose compression library

  version 1.1.4, March 11th, 2002

  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied

  warranty.  In no event will the authors be held liable for any damages

  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,

  including commercial applications, and to alter it and redistribute it

  freely, subject to the following restrictions:

  1. The origin of this software must not be misrepresented; you must not

     claim that you wrote the original software. If you use this software

     in a product, an acknowledgment in the product documentation would be

     appreciated but is not required.

  2. Altered source versions must be plainly marked as such, and must not be

     misrepresented as being the original software.

  3. This notice may not be removed or altered from any source distribution.

  Jean-loup Gailly        Mark Adler

  jloup@gzip.org          madler@alumni.caltech.edu

  The data format used by the zlib library is described by RFCs (Request for

  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt

  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).

*/

#ifndef _ZLIB_H

#define _ZLIB_H

#include "zconf.h"

#ifdef __cplusplus

extern "C" {

#endif

#define ZLIB_VERSION "1.1.4"

/*

     The 'zlib' compression library provides in-memory compression and

  decompression functions, including integrity checks of the uncompressed

  data.  This version of the library supports only one compression method

  (deflation) but other algorithms will be added later and will have the same

  stream interface.

     Compression can be done in a single step if the buffers are large

  enough (for example if an input file is mmap'ed), or can be done by

  repeated calls of the compression function.  In the latter case, the

  application must provide more input and/or consume the output

  (providing more output space) before each call.

     The library also supports reading and writing files in gzip (.gz) format

  with an interface similar to that of stdio.

     The library does not install any signal handler. The decoder checks

  the consistency of the compressed data, so the library should never

  crash even in case of corrupted input.

*/

typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));

typedef void   (*free_func)  OF((voidpf opaque, voidpf address));

struct internal_state;

typedef struct z_stream_s {

    Bytef    *next_in;  /* next input byte */

    uInt     avail_in;  /* number of bytes available at next_in */

    uLong    total_in;  /* total nb of input bytes read so far */

    Bytef    *next_out; /* next output byte should be put there */

    uInt     avail_out; /* remaining free space at next_out */

    uLong    total_out; /* total nb of bytes output so far */

    char     *msg;      /* last error message, NULL if no error */

    struct internal_state FAR *state; /* not visible by applications */

    alloc_func zalloc;  /* used to allocate the internal state */

    free_func  zfree;   /* used to free the internal state */

    voidpf     opaque;  /* private data object passed to zalloc and zfree */

    int     data_type;  /* best guess about the data type: ascii or binary */

    uLong   adler;      /* adler32 value of the uncompressed data */

    uLong   reserved;   /* reserved for future use */

} z_stream;

typedef z_stream FAR *z_streamp;

/*

   The application must update next_in and avail_in when avail_in has

   dropped to zero. It must update next_out and avail_out when avail_out

   has dropped to zero. The application must initialize zalloc, zfree and

   opaque before calling the init function. All other fields are set by the

   compression library and must not be updated by the application.

   The opaque value provided by the application will be passed as the first

   parameter for calls of zalloc and zfree. This can be useful for custom

   memory management. The compression library attaches no meaning to the

   opaque value.

   zalloc must return Z_NULL if there is not enough memory for the object.

   If zlib is used in a multi-threaded application, zalloc and zfree must be

   thread safe.

   On 16-bit systems, the functions zalloc and zfree must be able to allocate

   exactly 65536 bytes, but will not be required to allocate more than this

   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,

   pointers returned by zalloc for objects of exactly 65536 bytes *must*

   have their offset normalized to zero. The default allocation function

   provided by this library ensures this (see zutil.c). To reduce memory

   requirements and avoid any allocation of 64K objects, at the expense of

   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).

   The fields total_in and total_out can be used for statistics or

   progress reports. After compression, total_in holds the total size of

   the uncompressed data and may be saved for use in the decompressor

   (particularly if the decompressor wants to decompress everything in

   a single step).

*/

                        /* constants */

#define Z_NO_FLUSH      0

#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */

#define Z_SYNC_FLUSH    2

#define Z_FULL_FLUSH    3

#define Z_FINISH        4

/* Allowed flush values; see deflate() below for details */

#define Z_OK            0

#define Z_STREAM_END    1

#define Z_NEED_DICT     2

#define Z_ERRNO        (-1)

#define Z_STREAM_ERROR (-2)

#define Z_DATA_ERROR   (-3)

#define Z_MEM_ERROR    (-4)

#define Z_BUF_ERROR    (-5)

#define Z_VERSION_ERROR (-6)

/* Return codes for the compression/decompression functions. Negative

 * values are errors, positive values are used for special but normal events.

 */

#define Z_NO_COMPRESSION         0

#define Z_BEST_SPEED             1

#define Z_BEST_COMPRESSION       9

#define Z_DEFAULT_COMPRESSION  (-1)

/* compression levels */

#define Z_FILTERED            1

#define Z_HUFFMAN_ONLY        2

#define Z_DEFAULT_STRATEGY    0

/* compression strategy; see deflateInit2() below for details */

#define Z_BINARY   0

#define Z_ASCII    1

#define Z_UNKNOWN  2

/* Possible values of the data_type field */

#define Z_DEFLATED   8

/* The deflate compression method (the only one supported in this version) */

#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */

                        /* basic functions */

/* The application can compare zlibVersion and ZLIB_VERSION for consistency.

   If the first character differs, the library code actually used is

   not compatible with the zlib.h header file used by the application.

   This check is automatically made by deflateInit and inflateInit.

 */

/*

ZEXTERN(int)  deflateInit OF((z_streamp strm, int level));

     Initializes the internal stream state for compression. The fields

   zalloc, zfree and opaque must be initialized before by the caller.

   If zalloc and zfree are set to Z_NULL, deflateInit updates them to

   use default allocation functions.

     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:

   1 gives best speed, 9 gives best compression, 0 gives no compression at

   all (the input data is simply copied a block at a time).

   Z_DEFAULT_COMPRESSION requests a default compromise between speed and

   compression (currently equivalent to level 6).

     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not

   enough memory, Z_STREAM_ERROR if level is not a valid compression level,

   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible

   with the version assumed by the caller (ZLIB_VERSION).

   msg is set to null if there is no error message.  deflateInit does not

   perform any compression: this will be done by deflate().

*/

/*

    deflate compresses as much data as possible, and stops when the input

  buffer becomes empty or the output buffer becomes full. It may introduce some

  output latency (reading input without producing any output) except when

  forced to flush.

    The detailed semantics are as follows. deflate performs one or both of the

  following actions:

  - Compress more input starting at next_in and update next_in and avail_in

    accordingly. If not all input can be processed (because there is not

    enough room in the output buffer), next_in and avail_in are updated and

    processing will resume at this point for the next call of deflate().

  - Provide more output starting at next_out and update next_out and avail_out

    accordingly. This action is forced if the parameter flush is non zero.

    Forcing flush frequently degrades the compression ratio, so this parameter

    should be set only when necessary (in interactive applications).

    Some output may be provided even if flush is not set.

  Before the call of deflate(), the application should ensure that at least

  one of the actions is possible, by providing more input and/or consuming

  more output, and updating avail_in or avail_out accordingly; avail_out

  should never be zero before the call. The application can consume the

  compressed output when it wants, for example when the output buffer is full

  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK

  and with zero avail_out, it must be called again after making room in the

  output buffer because there might be more output pending.

    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is

  flushed to the output buffer and the output is aligned on a byte boundary, so

  that the decompressor can get all input data available so far. (In particular

  avail_in is zero after the call if enough output space has been provided

  before the call.)  Flushing may degrade compression for some compression

  algorithms and so it should be used only when necessary.

    If flush is set to Z_FULL_FLUSH, all output is flushed as with

  Z_SYNC_FLUSH, and the compression state is reset so that decompression can

  restart from this point if previous compressed data has been damaged or if

  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade

  the compression.

    If deflate returns with avail_out == 0, this function must be called again

  with the same value of the flush parameter and more output space (updated

  avail_out), until the flush is complete (deflate returns with non-zero

  avail_out).

    If the parameter flush is set to Z_FINISH, pending input is processed,

  pending output is flushed and deflate returns with Z_STREAM_END if there

  was enough output space; if deflate returns with Z_OK, this function must be

  called again with Z_FINISH and more output space (updated avail_out) but no

  more input data, until it returns with Z_STREAM_END or an error. After

  deflate has returned Z_STREAM_END, the only possible operations on the

  stream are deflateReset or deflateEnd.

    Z_FINISH can be used immediately after deflateInit if all the compression

  is to be done in a single step. In this case, avail_out must be at least

  0.1% larger than avail_in plus 12 bytes.  If deflate does not return

  Z_STREAM_END, then it must be called again as described above.

    deflate() sets strm->adler to the adler32 checksum of all input read

  so far (that is, total_in bytes).

    deflate() may update data_type if it can make a good guess about

  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered

  binary. This field is only for information purposes and does not affect

  the compression algorithm in any manner.

    deflate() returns Z_OK if some progress has been made (more input

  processed or more output produced), Z_STREAM_END if all input has been

  consumed and all output has been produced (only when flush is set to

  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example

  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible

  (for example avail_in or avail_out was zero).

*/

/*

     All dynamically allocated data structures for this stream are freed.

   This function discards any unprocessed input and does not flush any

   pending output.

     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the

   stream state was inconsistent, Z_DATA_ERROR if the stream was freed

   prematurely (some input or output was discarded). In the error case,

   msg may be set but then points to a static string (which must not be

   deallocated).

*/

/*

ZEXTERN(int)  inflateInit OF((z_streamp strm));

     Initializes the internal stream state for decompression. The fields

   next_in, avail_in, zalloc, zfree and opaque must be initialized before by

   the caller. If next_in is not Z_NULL and avail_in is large enough (the exact

   value depends on the compression method), inflateInit determines the

   compression method from the zlib header and allocates all data structures

   accordingly; otherwise the allocation will be deferred to the first call of

   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to

   use default allocation functions.

     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough

   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the

   version assumed by the caller.  msg is set to null if there is no error

   message. inflateInit does not perform any decompression apart from reading

   the zlib header if present: this will be done by inflate().  (So next_in and

   avail_in may be modified, but next_out and avail_out are unchanged.)

*/

ZEXTERN(int) inflate OF((z_streamp strm, int flush));

/*

    inflate decompresses as much data as possible, and stops when the input

  buffer becomes empty or the output buffer becomes full. It may some

  introduce some output latency (reading input without producing any output)

  except when forced to flush.

  The detailed semantics are as follows. inflate performs one or both of the

  following actions:

  - Decompress more input starting at next_in and update next_in and avail_in

    accordingly. If not all input can be processed (because there is not

    enough room in the output buffer), next_in is updated and processing

    will resume at this point for the next call of inflate().

  - Provide more output starting at next_out and update next_out and avail_out

    accordingly.  inflate() provides as much output as possible, until there

    is no more input data or no more space in the output buffer (see below

    about the flush parameter).

  Before the call of inflate(), the application should ensure that at least

  one of the actions is possible, by providing more input and/or consuming

  more output, and updating the next_* and avail_* values accordingly.

  The application can consume the uncompressed output when it wants, for

  example when the output buffer is full (avail_out == 0), or after each

  call of inflate(). If inflate returns Z_OK and with zero avail_out, it

  must be called again after making room in the output buffer because there

  might be more output pending.

    If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much

  output as possible to the output buffer. The flushing behavior of inflate is

  not specified for values of the flush parameter other than Z_SYNC_FLUSH

  and Z_FINISH, but the current implementation actually flushes as much output

  as possible anyway.

    inflate() should normally be called until it returns Z_STREAM_END or an

  error. However if all decompression is to be performed in a single step

  (a single call of inflate), the parameter flush should be set to

  Z_FINISH. In this case all pending input is processed and all pending

  output is flushed; avail_out must be large enough to hold all the

  uncompressed data. (The size of the uncompressed data may have been saved

  by the compressor for this purpose.) The next operation on this stream must

  be inflateEnd to deallocate the decompression state. The use of Z_FINISH

  is never required, but can be used to inform inflate that a faster routine

  may be used for the single inflate() call.

     If a preset dictionary is needed at this point (see inflateSetDictionary

  below), inflate sets strm-adler to the adler32 checksum of the

  dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise

  it sets strm->adler to the adler32 checksum of all output produced

  so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or

  an error code as described below. At the end of the stream, inflate()

  checks that its computed adler32 checksum is equal to that saved by the

  compressor and returns Z_STREAM_END only if the checksum is correct.

    inflate() returns Z_OK if some progress has been made (more input processed

  or more output produced), Z_STREAM_END if the end of the compressed data has

  been reached and all uncompressed output has been produced, Z_NEED_DICT if a

  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was

  corrupted (input stream not conforming to the zlib format or incorrect

  adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent

  (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not

  enough memory, Z_BUF_ERROR if no progress is possible or if there was not

  enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR

  case, the application may then call inflateSync to look for a good

  compression block.

*/

ZEXTERN(int)  inflateEnd OF((z_streamp strm));

/*

     All dynamically allocated data structures for this stream are freed.

   This function discards any unprocessed input and does not flush any

   pending output.

     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state

   was inconsistent. In the error case, msg may be set but then points to a

   static string (which must not be deallocated).

*/

                        /* Advanced functions */

/*

    The following functions are needed only in some special applications.

*/

/*

ZEXTERN(int)  deflateInit2 OF((z_streamp strm,

                                     int  level,

                                     int  method,

                                     int  windowBits,

                                     int  memLevel,

                                     int  strategy));

     This is another version of deflateInit with more compression options. The

   fields next_in, zalloc, zfree and opaque must be initialized before by

   the caller.

     The method parameter is the compression method. It must be Z_DEFLATED in

   this version of the library.

     The windowBits parameter is the base two logarithm of the window size

   (the size of the history buffer).  It should be in the range 8..15 for this

   version of the library. Larger values of this parameter result in better

   compression at the expense of memory usage. The default value is 15 if

   deflateInit is used instead.

     The memLevel parameter specifies how much memory should be allocated

   for the internal compression state. memLevel=1 uses minimum memory but

   is slow and reduces compression ratio; memLevel=9 uses maximum memory

   for optimal speed. The default value is 8. See zconf.h for total memory

   usage as a function of windowBits and memLevel.

     The strategy parameter is used to tune the compression algorithm. Use the

   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a

   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no

   string match).  Filtered data consists mostly of small values with a

   somewhat random distribution. In this case, the compression algorithm is

   tuned to compress them better. The effect of Z_FILTERED is to force more

   Huffman coding and less string matching; it is somewhat intermediate

   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects

   the compression ratio but not the correctness of the compressed output even

   if it is not set appropriately.

      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough

   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid

   method). msg is set to null if there is no error message.  deflateInit2 does

   not perform any compression: this will be done by deflate().

*/

/*

     Initializes the compression dictionary from the given byte sequence

   without producing any compressed output. This function must be called

   immediately after deflateInit, deflateInit2 or deflateReset, before any

   call of deflate. The compressor and decompressor must use exactly the same

   dictionary (see inflateSetDictionary).

     The dictionary should consist of strings (byte sequences) that are likely

   to be encountered later in the data to be compressed, with the most commonly

   used strings preferably put towards the end of the dictionary. Using a

   dictionary is most useful when the data to be compressed is short and can be

   predicted with good accuracy; the data can then be compressed better than

   with the default empty dictionary.

     Depending on the size of the compression data structures selected by

   deflateInit or deflateInit2, a part of the dictionary may in effect be

   discarded, for example if the dictionary is larger than the window size in

   deflate or deflate2. Thus the strings most likely to be useful should be

   put at the end of the dictionary, not at the front.

     Upon return of this function, strm->adler is set to the Adler32 value

   of the dictionary; the decompressor may later use this value to determine

   which dictionary has been used by the compressor. (The Adler32 value

   applies to the whole dictionary even if only a subset of the dictionary is

   actually used by the compressor.)

     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a

   parameter is invalid (such as NULL dictionary) or the stream state is

   inconsistent (for example if deflate has already been called for this stream

   or if the compression method is bsort). deflateSetDictionary does not

   perform any compression: this will be done by deflate().

*/

/*

     Sets the destination stream as a complete copy of the source stream.

     This function can be useful when several compression strategies will be

   tried, for example when there are several ways of pre-processing the input

   data with a filter. The streams that will be discarded should then be freed

   by calling deflateEnd.  Note that deflateCopy duplicates the internal

   compression state which can be quite large, so this strategy is slow and

   can consume lots of memory.

     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not

   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent

   (such as zalloc being NULL). msg is left unchanged in both source and

   destination.

*/

/*

     This function is equivalent to deflateEnd followed by deflateInit,

   but does not free and reallocate all the internal compression state.

   The stream will keep the same compression level and any other attributes

   that may have been set by deflateInit2.

      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source

   stream state was inconsistent (such as zalloc or state being NULL).

*/

/*

     Dynamically update the compression level and compression strategy.  The

   interpretation of level and strategy is as in deflateInit2.  This can be

   used to switch between compression and straight copy of the input data, or

   to switch to a different kind of input data requiring a different

   strategy. If the compression level is changed, the input available so far

   is compressed with the old level (and may be flushed); the new level will

   take effect only at the next call of deflate().

     Before the call of deflateParams, the stream state must be set as for

   a call of deflate(), since the currently available input may have to

   be compressed and flushed. In particular, strm->avail_out must be non-zero.

     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source

   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR

   if strm->avail_out was zero.

*/

/*

ZEXTERN(int)  inflateInit2 OF((z_streamp strm,

                                     int  windowBits));

     This is another version of inflateInit with an extra parameter. The

   fields next_in, avail_in, zalloc, zfree and opaque must be initialized

   before by the caller.

     The windowBits parameter is the base two logarithm of the maximum window

   size (the size of the history buffer).  It should be in the range 8..15 for

   this version of the library. The default value is 15 if inflateInit is used

   instead. If a compressed stream with a larger window size is given as

   input, inflate() will return with the error code Z_DATA_ERROR instead of

   trying to allocate a larger window.